Superior Long-Term Performance of Composite Phase Change Material with High-Density Polyethylene under Thermal Aging Process

ABSTRACT

[1]  D. Rahmalina,et al.  Improving the operation and thermal response of multiphase coexistence latent storage system using stabilized organic phase change material , 2023, Results in Engineering.

[2]  N. Biswas,et al.  Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes , 2023, Micromachines.

[3]  Ismail,et al.  Improving the performance of a small-scale cascade latent heat storage system by using gradual melting temperature storage tank , 2023, Case Studies in Thermal Engineering.

[4]  Ali J. Chamkha,et al.  A comparative study of melting behavior of phase change material with direct fluid contact and container inclination , 2023, Energy Nexus.

[5]  Ismail,et al.  Thermal Performance Assessment for an Active Latent Heat Storage Tank by Using Various Finned-Coil Heat Exchangers , 2022, International Journal of Heat and Technology.

[6]  A. H. Lahuri,et al.  Thermal stress influence on the long-term performance of fast-charging paraffin-based thermal storage , 2022, Thermal Science and Engineering Progress.

[7]  Sorour Alotaibi,et al.  Melting process of various phase change materials in presence of auxiliary fluid with sinusoidal wall temperature , 2022, Journal of Energy Storage.

[8]  A. Traverso,et al.  Thermal Energy Storage based on Cold Phase Change Materials: Charge Phase Assessment , 2022, Applied Thermal Engineering.

[9]  Omid Mohammadi,et al.  The impact of employing Carbon nanotube and Fe3O4 nanoparticles along with intermediate boiling fluid to improve the discharge rate of Phase change material , 2022, Applied Thermal Engineering.

[10]  F. Pennec,et al.  Supercooling of phase change materials: A review , 2022, Renewable and Sustainable Energy Reviews.

[11]  Qingsong Wang,et al.  Quantitative analysis of aging and detection of commercial 18650 lithium-ion battery under slight overcharging cycling , 2022, Journal of Cleaner Production.

[12]  Ismail,et al.  Increasing the rating performance of paraffin up to 5000 cycles for active latent heat storage by adding high-density polyethylene to form shape-stabilized phase change material , 2022, Journal of Energy Storage.

[13]  N. Abu‐Hamdeh,et al.  Integration of a solar air heater to a building equipped with PCM to reduce the energy demand , 2021, Journal of Building Engineering.

[14]  M. Nurtanto,et al.  Experimental investigation on the effect of thermophysical properties of a heat transfer fluid on pumping performance for a convective heat transfer system , 2021, Journal of Thermal Engineering.

[15]  Eric J. Dufek,et al.  Extended cycle life implications of fast charging for lithium-ion battery cathode , 2021 .

[16]  Qiangwei Wang,et al.  Experimental Study of the Thermal Properties of a Homogeneous Dispersion System of a Paraffin-based Composite Phase Change Materials , 2021 .

[17]  Min Chen,et al.  Design and investigation of single tank phase change thermal storage domestic hot water system , 2021 .

[18]  Ali J. Chamkha,et al.  Study of paraffin-based composite-phase change materials for a shell and tube energy storage system: A mesh adaptation approach , 2021 .

[19]  R. Roshandel,et al.  Modeling and optimization of a multiple (cascading) phase change material solar storage system , 2021 .

[20]  T. Barz,et al.  Paraffins as phase change material in a compact plate-fin heat exchanger - Part I: Experimental analysis and modeling of complete phase transitions , 2020 .

[21]  C. Meena,et al.  A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings , 2020, Sustainability.

[22]  J. Banerjee,et al.  Thermal performance augmentation in latent heat storage unit using spiral fin: An experimental analysis , 2020 .

[23]  Yulong Ding,et al.  Hybrid 3 in 1 thermal energy storage system – Outlook for a novel storage strategy , 2020 .

[24]  V. Mayilvelnathan,et al.  Experimental investigation on thermal behavior of graphene dispersed erythritol PCM in a shell and helical tube latent energy storage system , 2020, International Journal of Thermal Sciences.

[25]  Dan Zhou,et al.  Characterization and effects of thermal cycling on the properties of paraffin/expanded graphite composites , 2020 .

[26]  S. Saha,et al.  Effect of shrinkage void on thermal performance of pure and binary phase change materials based thermal energy storage system: A semi-analytical approach , 2020 .

[27]  Dan Zhou,et al.  Comprehensive evaluation of Paraffin-HDPE shape stabilized PCM with hybrid carbon nano-additives , 2019 .

[28]  F. Bai,et al.  Microstructural evolution within mushy zone during paraffin’s melting and solidification , 2019, International Journal of Heat and Mass Transfer.

[29]  J. Banerjee,et al.  Thermal performance of shell and tube latent heat storage unit: Comparative assessment of horizontal and vertical orientation , 2019, Journal of Energy Storage.

[30]  K. Mo,et al.  Thermal efficiency and durability performances of paraffinic phase change materials with enhanced thermal conductivity – A review , 2019, Thermochimica Acta.

[31]  Li Wang,et al.  High density polyethylene (HDPE) — Graphite composite manufactured by extrusion: A novel way to fabricate phase change materials for thermal energy storage , 2018, Particuology.

[32]  Hans Bock,et al.  State and state of charge estimation for a latent heat storage , 2018 .

[33]  Jiankai Dong,et al.  Experimental study on the thermal stability of a paraffin mixture with up to 10,000 thermal cycles , 2017 .

[34]  Zhengguo Zhang,et al.  Metal foam embedded in SEBS/paraffin/HDPE form-stable PCMs for thermal energy storage , 2016 .

[35]  Wei Sha,et al.  Shape stabilised phase change materials based on a high melt viscosity HDPE and paraffin waxes , 2016 .

[36]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[37]  D. Rahmalina,et al.  Increasing the charge/discharge rate for phase-change materials by forming hybrid composite paraffin/ash for an effective thermal energy storage system , 2023, AIMS Materials Science.

[38]  Basab Chakraborty,et al.  Battery management strategies: An essential review for battery state of health monitoring techniques , 2022, Journal of Energy Storage.

[39]  The Optimal Pitch Distance for Maximizing the Power Ratio for Savonius Turbine on Inline Configuration , 2021, International Journal of Renewable Energy Research.

[40]  S. Mantell,et al.  Relationship between morphological changes and mechanical properties in HDPE films exposed to a chlorinated environment , 2020 .