Stochastic representation of blast load damage in a reinforced concrete building

Abstract In building engineering, deterministic analyses of system level disaster scenarios, including buildings subject to explosive loading, have been widely researched and as a result there are many sophisticated methods and algorithms for simulation of such events. Similarly structural reliability or “risk-based” analyses are also well developed and the computation of the probability of failure of a structural system is readily achievable. This paper combines the Monte Carloethod, used in many structural reliability algorithms, with a simplified but conservative progressive collapse structural model. This resulting algorithm is then used to generate a dataset representing the percentage damage a ten storey reinforced concrete building sustains when subject to an explosive load of a given magnitude located randomly in the ground floor car park. The progressive collapse structural model has a non-linear transient finite element method at its core. The explosive location, magnitude and duration, as well as the building imposed loading are all modelled as random variables. Using this preliminary model, a statistical analysis of the generated data provides evidence that the percentage damage in a concrete framed building due to an explosion is Weibull distributed.

[1]  Hong Hao,et al.  Prediction of fragment size and ejection distance of masonry wall under blast load using homogenized masonry material properties , 2009 .

[2]  H. Winston,et al.  Noise Measurements in Semiconductors at Very Low Frequencies , 1955 .

[3]  Hong Hao,et al.  Reliability analysis of direct shear and flexural failure modes of RC slabs under explosive loading , 2002 .

[4]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[5]  Leslaw Kwasniewski,et al.  Nonlinear dynamic simulations of progressive collapse for a multistory building , 2010 .

[6]  Mark G. Stewart,et al.  The effects of explosive blast load variability on safety hazard and damage risks for monolithic window glazing , 2009 .

[7]  Jaap Weerheijm,et al.  Explosive loading of multi storey RC buildings: Dynamic response and progressive collapse , 2009 .

[8]  Hong Hao,et al.  Safe Scaled Distance for Masonry Infilled RC Frame Structures Subjected to Airblast Loads , 2007 .

[9]  P.S.Bulson.  Explosive loading of engineering structures , 1997 .

[10]  John M. Biggs,et al.  Introduction to Structural Dynamics , 1964 .

[11]  Parviz Soroushian,et al.  Strain Rate-Dependent Interaction Diagrams for Reinforced Concrete Sections , 1986 .

[12]  Hong Hao,et al.  Reliability Analysis of Reinforced Concrete Slabs Under Explosive Loading , 2001 .

[13]  John Hetherington,et al.  Blast and ballistic loading of structures , 1994 .

[14]  Theodor Krauthammer,et al.  Response of structural concrete elements to severe impulsive loads , 1994 .

[15]  G. R. Abrahamson,et al.  The dynamics of explosion and its use , 1979 .

[16]  T. Krauthammer,et al.  Response of Reinforced Concrete Elements to Severe Impulsive Loads , 1990 .

[17]  H. Brode.  Numerical Solutions of Spherical Blast Waves , 1955 .

[18]  Sher Ali Mirza,et al.  Variations in Dimensions of Reinforced Concrete Members , 1979 .

[19]  W. E. Baker,et al.  Explosion Hazards and Evaluation , 2012 .

[20]  T. Krauthammer.  Modern Protective Structures , 2008 .

[21]  Joosef Leppänen,et al.  Experiments and numerical analyses of blast and fragment impacts on concrete. , 2005 .

[22]  Bibiana Luccioni,et al.  Analysis of building collapse under blast loads , 2004 .

[23]  T. Krauthammer,et al.  Dynamic response and behavior of reinforced concrete slabs under impact loading , 2007 .

[24]  M.Y.H. Bangash,et al.  Shock, Impact and Explosion: Structural Analysis and Design , 2008 .

[25]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[26]  Masuhiro Beppu,et al.  Size effect for high-strength concrete cylinders subjected to axial impact , 2003 .

[27]  David Bogosian,et al.  Measuring Uncertainty and Conservatism in Simplified Blast Models , 2002 .

[28]  David W Hyde,et al.  Microcomputer Programs CONWEP and FUNPRO, Applications of TM 5-855-1, 'Fundamentals of Protective Design for Conventional Weapons' (User's Guide) , 1988 .