Friction stir dovetailing of AA7099 to steel with AA6061 interlayer for reduced Zn embrittlement at dissimilar interface

[1]  S. Whalen,et al.  Numerical simulation and experimental validation of joint performance in aluminum-steel lap welds formed by friction stir dovetailing , 2020 .

[2]  S. Whalen,et al.  Advances in dissimilar metals joining through temperature control of friction stir welding , 2019, MRS Bulletin.

[3]  A. Loureiro,et al.  Effect of reverse dual rotation process on properties of friction stir welding of AA7075 to AISI304 , 2019, Transactions of Nonferrous Metals Society of China.

[4]  S. Whalen,et al.  Joining AA7099 to Ni-Cr-Mo Steel Using Friction Stir Dovetailing , 2019, Friction Stir Welding and Processing X.

[5]  Noor Zaman Khan,et al.  Investigation on material mixing during FSW of AA7475 to AISI304 , 2018, Materials and Manufacturing Processes.

[6]  S. Whalen,et al.  Joining thick section aluminum to steel with suppressed FeAl intermetallic formation via friction stir dovetailing , 2018 .

[7]  S. Whalen,et al.  Solid-State Joining of Thick-Section Dissimilar Materials Using a New Friction Stir Dovetailing (FSD) Process , 2017 .

[8]  N. R. Harrison,et al.  Friction Stir Welding Process Development of AA7075 for Hot Stamping Applications , 2017 .

[9]  A. Melander,et al.  Intermetallic compounds in friction stirred lap joints between AA5754/galvanised ultra-high strength steel , 2016 .

[10]  Dulce Maria Rodrigues,et al.  Dissimilar friction stir lap welding of AA 5754-H22/AA 6082-T6 aluminium alloys: Influence of material properties and tool geometry on weld strength , 2015 .

[11]  D. Raabe,et al.  On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys , 2015 .

[12]  S. Babu,et al.  Effect of filler metal and post-weld friction stir processing on stress corrosion cracking susceptibility of Al–Zn–Mg arc welds , 2015 .

[13]  G. Song,et al.  Study of mechanical joint strength of aluminum alloy 7075-T6 and dual phase steel 980 welded by friction bit joining and weld-bonding under corrosion medium , 2015 .

[14]  Jing Zhu,et al.  Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: Structure determination of the precipitates in AlZnMg(Cu) alloys , 2015 .

[15]  Yingchun Chen,et al.  Effect of Interfacial Reaction on the Mechanical Performance of Steel to Aluminum Dissimilar Ultrasonic Spot Welds , 2015, Metallurgical and Materials Transactions A.

[16]  N. Mcpherson,et al.  Effect of Laser Processing Parameters on the Formation of Intermetallic Compounds in Fe-Al Dissimilar Welding , 2014, Journal of Materials Engineering and Performance.

[17]  M. Gibson,et al.  Substitution of Cu and/or Al in η phase (MgZn2) and the implications for precipitation in Al–Zn–Mg–(Cu) alloys , 2014 .

[18]  Anthony P. Reynolds,et al.  Effect of Tool Pin Thread Forms on Friction Stir Weldability of Different Aluminum Alloys , 2014 .

[19]  O. Grydin,et al.  Twin-roll casting of aluminum–steel clad strips , 2013 .

[20]  Y. J. Chao,et al.  Metal Flow during Friction Stir Welding of 7075-T651 Aluminum Alloy , 2013 .

[21]  Jiakun Liu,et al.  Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process , 2011 .

[22]  Jianxun Zhang,et al.  Friction Stir Brazing: a Novel Process for Fabricating Al/Steel Layered Composite and for Dissimilar Joining of Al to Steel , 2011 .

[23]  F. P. Neto,et al.  Welding of AA1050 aluminum with AISI 304 stainless steel by rotary friction welding process , 2010 .

[24]  C. Iwamoto,et al.  Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding , 2010 .

[25]  Tomotake Hirata,et al.  Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys , 2009 .

[26]  Y. Chen,et al.  Role of zinc coat in friction stir lap welding Al and zinc coated steel , 2008 .

[27]  Kwang-Jin Lee,et al.  Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding , 2007 .

[28]  Tomasz Siwowski,et al.  Aluminium Bridges – Past, Present and Future , 2006 .

[29]  Seung-Boo Jung,et al.  Interfacial reaction in steel–aluminum joints made by friction stir welding , 2006 .

[30]  Takehiko Watanabe,et al.  Effect of Welding Process Parameters on Mechanical Property of FSW Lap Joint between Aluminum Alloy and Steel , 2005 .

[31]  H. Tsubakino,et al.  Amorphization by friction welding between 5052 aluminum alloy and 304 stainless steel , 2000 .

[32]  Ian J. Polmear,et al.  Light Alloys: Metallurgy of the Light Metals , 1982 .