Dynamic programming based methodology for the optimization of the sizing and operation of hybrid energy plants

Abstract The dynamic programming method is mainly used to deal with energy management and optimal control problems of hybrid energy plants. This paper extends the application of this method and documents the development of a dynamic programming based methodology for the optimization of both the sizing and operation of hybrid energy plants. The optimization problem is carried out with the aim of minimizing primary energy consumption over the simulation period. Moreover, in order to demonstrate the validity and usefulness of the optimization methodology presented in this paper, a comparison with an optimization methodology developed by the same authors is made. The optimization methodology used as a benchmark is based on the genetic algorithm and is commonly used in the literature. A case study consisting of a building located in the north of Italy is considered to demonstrate the developed methodology. The hybrid energy plant used to fulfil the energy demands of the building comprises a photovoltaic panel, solar thermal collector, combined heat and power, ground and air source heat pumps, hot water storage and auxiliary boiler. Compared to the genetic algorithm based methodology, the proposed methodology allows a primary energy saving and computation time saving of about 5.4% and 41%, respectively. In addition, compared to a traditional plant composed of a boiler and the grid, the developed methodology allows a primary energy saving of about 24%. The proposed methodology is fast, easy to implement and also addresses the non-linearity associated with the optimization problem of hybrid energy plants.

[1]  Michele Rossi,et al.  Development and application of a Predictive Controller to a mini district heating network fed by a biomass boiler , 2019 .

[2]  Mahmoud Pesaran H.A,et al.  A review of the optimal allocation of distributed generation: Objectives, constraints, methods, and algorithms , 2017 .

[3]  R. Kumar,et al.  Energy, exergy, economic analysis and optimization of polygeneration hybrid solar-biomass system , 2018, Applied Thermal Engineering.

[4]  Zhun Yu,et al.  A GA-based system sizing method for net-zero energy buildings considering multi-criteria performance requirements under parameter uncertainties , 2016 .

[5]  Enrico Fabrizio,et al.  A model to design and optimize multi-energy systems in buildings at the design concept stage , 2010 .

[6]  Hongbo Ren,et al.  Multi-objective Optimization of Integrated Renewable Energy System Considering Economics and CO2 Emissions☆ , 2016 .

[7]  Roberto Gallea,et al.  Optimization of trigeneration systems by Mathematical Programming: Influence of plant scheme and boundary conditions , 2015 .

[8]  Liping Wang,et al.  Particle Swarm Optimization for Control Operation of an All-Variable Speed Water-Cooled Chiller Plant , 2018 .

[9]  Makbul A.M. Ramli,et al.  A review of optimization approaches for hybrid distributed energy generation systems: Off-grid and grid-connected systems , 2018 .

[10]  Mohamed Haouari,et al.  Review of optimization techniques applied for the integration of distributed generation from renewable energy sources , 2017 .

[11]  Lei Cheng,et al.  Optimal daily generation scheduling of large hydro–photovoltaic hybrid power plants , 2018, Energy Conversion and Management.

[12]  R. Bellman.  Dynamic programming. , 1957, Science.

[13]  Quan Zhang,et al.  Energy saving analysis of the cooling plant using lake water source base on the optimized control strategy with set points change , 2018 .

[14]  Michele Pinelli,et al.  Concurrent Optimization of Size and Switch-on Priority of a Multi-source Energy System for a Commercial Building Application☆ , 2015 .

[15]  Enrico Corti,et al.  Managing Wind Variability with Pumped Hydro Storage and Gas Turbines , 2014 .

[16]  Jordi-Roger Riba,et al.  Combined heat and power design based on environmental and cost criteria , 2016 .

[17]  Javad Mahmoudimehr,et al.  A novel multi-objective Dynamic Programming optimization method: Performance management of a solar thermal power plant as a case study , 2019, Energy.

[18]  Olle Sundström,et al.  A generic dynamic programming Matlab function , 2009, 2009 IEEE Control Applications, (CCA) & Intelligent Control, (ISIC).

[19]  Risto Lahdelma,et al.  Modelling and optimization of CHP based district heating system with renewable energy production and energy storage , 2015 .

[20]  Ralph Evins,et al.  Multi-level optimization of building design, energy system sizing and operation , 2015 .

[21]  R Sontag,et al.  Cost effectiveness of decentralized energy supply systems taking solar and wind utilization plants into account , 2003 .

[22]  Michele Pinelli,et al.  Optimal sizing of a multi-source energy plant for power heat and cooling generation , 2014 .

[23]  Andrea Luigi Facci,et al.  Optimization of CHCP (combined heat power and cooling) systems operation strategy using dynamic programming , 2014 .

[24]  Chris Marnay,et al.  Modeling of Thermal Storage Systems in MILP Distributed Energy Resource Models , 2015 .

[25]  Giuseppe Caia,et al.  Le energie rinnovabili , 2006 .

[26]  Maurizio Repetto,et al.  Optimal integration of solar energy in a district heating network , 2015 .

[27]  H. E. Saleh.  Effect of variation in LPG composition on emissions and performance in a dual fuel diesel engine , 2008 .

[28]  Daniele Cocco,et al.  Tecnologie delle energie rinnovabili , 2016 .

[29]  Younes Noorollahi,et al.  GA/AHP-based optimal design of a hybrid CCHP system considering economy, energy and emission , 2017 .

[30]  Chuntian Cheng,et al.  Optimization of hydropower system operation by uniform dynamic programming for dimensionality reduction , 2017 .

[31]  Elaheh Mashhour,et al.  A comprehensive model for self-scheduling an energy hub to supply cooling, heating and electrical demands of a building , 2016 .

[32]  Gianfranco Rizzo,et al.  Application of dynamic programming to the optimal management of a hybrid power plant with wind turbines, photovoltaic panels and compressed air energy storage , 2012 .

[33]  François Maréchal,et al.  Methods for multi-objective investment and operating optimization of complex energy systems , 2012 .

[34]  Elena Fuentes,et al.  Partial load efficiency degradation of a water-to-water heat pump under fixed set-point control , 2016 .

[35]  Lew Art,et al.  Introduction to Dynamic Programming , 2007 .

[36]  Daniel Friedrich,et al.  Two-stage optimisation of hybrid solar power plants , 2018 .

[37]  Tarek Y. ElMekkawy,et al.  Multi-objective optimal design of hybrid renewable energy systems using PSO-simulation based approach , 2014 .

[38]  Gino Bella,et al.  Power management of a hybrid renewable system for artificial islands: A case study , 2016 .

[39]  Hung-Cheng Chen,et al.  Optimum capacity determination of stand-alone hybrid generation system considering cost and reliability , 2013 .

[40]  Kyoung-Ho Lee,et al.  Preliminary determination of optimal size for renewable energy resources in buildings using RETScreen , 2012 .

[41]  Tony Roskilly,et al.  Dynamic programming for optimal operation of a biofuel micro CHP-HES system , 2017 .

[42]  Scott Kelly,et al.  Optimal energy management of a grid-connected multiple energy carrier micro-grid , 2019, Applied Thermal Engineering.

[43]  M. Ghorab.  Energy hubs optimization for smart energy network system to minimize economic and environmental impact at Canadian community , 2019, Applied Thermal Engineering.

[44]  Masatoshi Sakawa,et al.  Operational planning of district heating and cooling plants through genetic algorithms for mixed 0-1 linear programming , 2002, Eur. J. Oper. Res..

[45]  Stephen White,et al.  A comprehensive, multi-objective optimization of solar-powered absorption chiller systems for air-conditioning applications , 2017 .