Evaluation of high‐temperature exposure of photovoltaic modules

Photovoltaic (PV) modules operate at temperatures above ambient owing to the thermal energy of sunlight. The operating temperature primarily depends on the ambient temperature, incident sunlight, mounting configuration, packaging configuration, and wind speed. In this paper, the cumulative thermal degradation is modeled to follow Arrhenius behavior. The data are analyzed to determine the constant temperature that would give average aging equivalent to the variable temperatures observed in the field. These equivalent temperatures are calculated for various locations using six configurations, providing a technical basis for defining accelerated thermal‐endurance and ‐degradation testing. This data may also be useful as a starting point for studies of the combined effects of elevated temperature and other factors such as UV, moisture, and mechanical stress. Copyright © 2011 John Wiley & Sons, Ltd.

[1]  R. Dixon.  Thermal Aging Predictions from an Arrhenus Plot with Only One Data Point , 1980, IEEE Transactions on Electrical Insulation.

[2]  A. Desombre.  Methodology for a reliability study on photovoltaic modules , 1981 .

[3]  R. G. Ross,et al.  Assessing photovoltaic module degradation and lifetime from long term environmental tests , 1983 .

[4]  William A. Beckman,et al.  Solar Engineering of Thermal Processes, 2nd ed. , 1994 .

[5]  G. McKenna,et al.  On the Physics Required for Prediction of Long Term Performance of Polymers and Their Composites , 1994, Journal of research of the National Institute of Standards and Technology.

[6]  William E. Boyson,et al.  Photovoltaic array performance model. , 2004 .

[7]  M. Köhl,et al.  Performance and durability assessment : optical materials for solar thermal systems , 2004 .

[8]  M. Heck,et al.  Advanced procedure for the assessment of the lifetime of solar absorber coatings , 2004 .

[9]  T. J. McMahon.  Accelerated testing and failure of thin‐film PV modules , 2004 .

[10]  J. Miller,et al.  Long Term Reliability of Photovoltaic Modules , 2006, 2006 IEEE 4th World Conference on Photovoltaic Energy Conference.

[11]  John H. Wohlgemuth,et al.  Using Accelerated Tests and Field Data to Predict Module Reliability and Lifetime , 2008 .

[12]  James Edward Pickett,et al.  Effects of temperature on the weathering of engineering thermoplastics , 2008 .

[13]  Alessandro Virtuani,et al.  Modification to the Standard Reference Environment (SRE) for Nominal Operating Cell Temperature (NOCT) to Account for Building Integration , 2009 .

[14]  M. Heck,et al.  LOAD EVALUATION OF PV-MODULES FOR OUTDOOR WEATHERING UNDER EXTREME CLIMATIC CONDITIONS , 2009 .

[15]  N. R. Sorensen,et al.  The effect of metal foil tape degradation on the long-term reliability of PV modules , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[16]  T. J. McMahon,et al.  History of accelerated and qualification testing of terrestrial photovoltaic modules: A literature review , 2009 .

[17]  Joseph Kuitche,et al.  Nominal Operating Cell Temperature (NOCT): Effects of module size, loading and solar spectrum , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[18]  Jaewon Oh,et al.  Temperature testing and analysis of PV modules PER ANSI/UL 1703 and IEC 61730 standards , 2010, 2010 35th IEEE Photovoltaic Specialists Conference.