Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part II – Micromechanical analyses

Abstract This paper presents the application of a new constitutive damage model for an epoxy matrix on micromechanical analyses of polymer composite materials. Different representative volume elements (RVEs) are developed with a random distribution of fibres. Upon application of periodic boundary conditions (PBCs) on the RVEs, different loading scenarios are applied and the mechanical response of the composite studied. Focus is given to the influence of the interface between fibre and matrix, as well as to the influence of the epoxy matrix, on the strength properties of the composite, damage initiation and propagation under different loading conditions.

[1]  António R. Melro,et al.  Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I – Constitutive modelling , 2013 .

[2]  L. Berglund,et al.  Transverse single-fibre test for interfacial debonding in composites: 2. Modelling , 1997 .

[3]  Vinh Phu Nguyen,et al.  On the existence of representative volumes for softening quasi-brittle materials – A failure zone averaging scheme , 2010 .

[4]  Marek Romanowicz,et al.  A numerical approach for predicting the failure locus of fiber reinforced composites under combined transverse compression and axial tension , 2012 .

[5]  J. Segurado,et al.  Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling , 2012 .

[6]  P. D. Soden,et al.  A COMPARISON OF THE PREDICTIVE CAPABILITIES OF CURRENT FAILURE THEORIES FOR COMPOSITE LAMINATES , 1998 .

[7]  R. S. Raghava,et al.  The macroscopic yield behaviour of polymers , 1973 .

[8]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[9]  Lorenzo Iannucci,et al.  Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development , 2006 .

[10]  Elhem Ghorbel,et al.  A viscoplastic constitutive model for polymeric materials , 2008 .

[11]  Conor T. McCarthy,et al.  A combined experimental–numerical approach for generating statistically equivalent fibre distributions for high strength laminated composite materials , 2010 .

[12]  Masaki Hojo,et al.  Failure behavior of an epoxy matrix under different kinds of static loading , 2001 .

[13]  Conor T. McCarthy,et al.  Micromechanical modelling of the transverse damage behaviour in fibre reinforced composites , 2011 .

[14]  Jorge E. Hurtado,et al.  A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element , 2006 .

[15]  Carlos González,et al.  Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites , 2010 .

[16]  Pedro P. Camanho,et al.  Influence of geometrical parameters on the elastic response of unidirectional composite materials , 2012 .

[17]  Shuguang Li,et al.  General unit cells for micromechanical analyses of unidirectional composites , 2001 .

[18]  A. Kinloch,et al.  The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles , 2010 .

[19]  Masaki Hojo,et al.  Microscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses , 2005 .

[20]  Pedro P. Camanho,et al.  Generation of random distribution of fibres in long-fibre reinforced composites , 2008 .

[21]  Mgd Marc Geers,et al.  Novel boundary conditions for strain localization analyses in microstructural volume elements , 2012 .

[22]  E. Barbero.  Finite element analysis of composite materials , 2007 .

[23]  Masaki Hojo,et al.  Evaluation of interfacial strength in CF/epoxies using FEM and in-situ experiments , 2006 .

[24]  H. Schürmann,et al.  FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS , 1998 .

[25]  Carlos González,et al.  Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling , 2007 .