Ionic liquid functionalized electrospun gel polymer electrolyte for use in a high-performance lithium metal battery

The ability to suppress the formation and proliferation of lithium dendrites is an important endeavour towards the successful commercialization of lithium metal batteries as high energy storage devices. The use of gel polymer electrolytes is one of the most promising pathways to solving this problem and obtaining high performance. Here, we propose a novel gel polymer electrolyte (GPE), in which a nanostructured ionic liquid (IL), silica nanoparticle-tethered 1-methyl-1-propylpiperidinium bis(trifluoromethanesulfonyl)imide (SiO2PPTFSI), is first introduced into a gel polymer electrolyte matrix based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF–HFP) prepared by electrospinning, followed by plasticization in a fluoroethylene carbonate (FEC) electrolyte. After being incorporated with the nanostructured IL, this novel GPE exhibits good mechanical properties, an enhanced electrolyte uptake (552 wt%) and a high ionic conductivity (0.64 mS cm−1) and lithium ion transference number (tLi+ = 0.60). In addition, it suppresses lithium dendrite formation and exhibits stable plating/striping cycles over 1200 hours in a symmetric lithium cell. More importantly, it is electrochemically stable up to 5.1 V (vs. Li/Li+), making it practical for use in LiNi0.5Mn1.5O4 systems with a much better cycle stability and rate capability relative to those of Celgard with a liquid electrolyte or GPE based on PVDF–HFP. The Li/LiNi0.5Mn1.5O4 cell with the novel GPE exhibits an initial discharge capacity of 119 mA h g−1 at 1C, a capacity retention of 92.1% after 460 cycles, and a high reversible capacity of 74 mA h g−1 at 6C. Therefore, the use of a nanostructured IL-modified GPE presents a promising way to enhance the cycle performance and safety of lithium metal cells.

[1]  Matthew R. Shaner,et al.  Geophysical constraints on the reliability of solar and wind power in the United States , 2018 .

[2]  Hongtao Qu,et al.  Stable cycling of lithium-sulfur battery enabled by a reliable gel polymer electrolyte rich in ester groups , 2018 .

[3]  Hyun‐Seok Kim,et al.  An enhanced electrochemical and cycling properties of novel boronic Ionic liquid based ternary gel polymer electrolytes for rechargeable Li/LiCoO2 cells , 2017, Scientific Reports.

[4]  Yayuan Liu,et al.  Ultrahigh–current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF3 framework , 2017, Science Advances.

[5]  Jusef Hassoun,et al.  Lithium-ion batteries for sustainable energy storage: recent advances towards new cell configurations , 2017 .

[6]  Xiangping Zhang,et al.  A self-stabilized suspension catholyte to enable long-term stable Li–S flow batteries , 2017 .

[7]  Huimin Lu,et al.  A novel ionic liquid polymer electrolyte for quasi-solid state lithium air batteries , 2017 .

[8]  R. Lv,et al.  Hybrid silica membranes with a polymer nanofiber skeleton and their application as lithium-ion battery separators , 2017 .

[9]  Qi Li,et al.  3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries , 2017 .

[10]  Monte L. Helm,et al.  Formation of Reversible Solid Electrolyte Interface on Graphite Surface from Concentrated Electrolytes. , 2017, Nano letters.

[11]  B. El-Zahab,et al.  Polymeric Ionic Liquid Gel Electrolyte for Room Temperature Lithium Battery Applications , 2016 .

[12]  K. Karuppasamy,et al.  Electrochemical and cycling performances of novel nonafluorobutanesulfonate (nonaflate) ionic liquid based ternary gel polymer electrolyte membranes for rechargeable lithium ion batteries , 2016 .

[13]  Yue Ma,et al.  Ionic conductivity enhancement in gel polymer electrolyte membrane with N-methyl-N-butyl-piperidine-bis(trifluoromethylsulfonyl) imide ionic liquid for lithium ion battery , 2016 .

[14]  Xiaoping Li,et al.  Cycling performance improvement of polypropylene supported poly(vinylidene fluoride-co-hexafluoropropylene)/maleic anhydride-grated-polyvinylidene fluoride based gel electrolyte by incorporating nano-Al2O3 for full batteries , 2016 .

[15]  Qi Li,et al.  Progress in electrolytes for rechargeable Li-based batteries and beyond , 2016 .

[16]  A. C. Marr,et al.  Ionic liquid gel materials: applications in green and sustainable chemistry , 2016 .

[17]  Yong‐Sheng Hu,et al.  MWCNT porous microspheres with an efficient 3D conductive network for high performance lithium–sulfur batteries , 2016 .

[18]  J. Goodenough.  Energy storage materials: A perspective , 2015 .

[19]  Xuehong Lu,et al.  Poly(vinylidene fluoride) nanofibrous mats with covalently attached SiO2 nanoparticles as an ionic liquid host: enhanced ion transport for electrochromic devices and lithium-ion batteries , 2015 .

[20]  Jiawei Wang,et al.  Hybrid gel polymer electrolyte fabricated by electrospinning technology for polymer lithium-ion battery , 2015 .

[21]  Guodong Kang,et al.  Application and modification of poly(vinylidene fluoride) (PVDF) membranes – A review , 2014 .

[22]  L. Archer,et al.  Piperidinium tethered nanoparticle-hybrid electrolyte for lithium metal batteries , 2014 .

[23]  B. Liaw,et al.  A review of lithium deposition in lithium-ion and lithium metal secondary batteries , 2014 .

[24]  C. Cao,et al.  Poly(vinylidene fluoride)/SiO2 composite membranes prepared by electrospinning and their excellent properties for nonwoven separators for lithium-ion batteries , 2014 .

[25]  J. F. Pereira,et al.  Mixing ionic liquids – “simple mixtures” or “double salts”? , 2014 .

[26]  Xiaoen Wang,et al.  Gelled microporous polymer electrolyte with low liquid leakage for lithium-ion batteries , 2014 .

[27]  Zhengyuan Tu,et al.  Ionic-liquid-nanoparticle hybrid electrolytes: applications in lithium metal batteries. , 2014, Angewandte Chemie.

[28]  Yuncang Li,et al.  Electrospun Spinel LiNi0.5 Mn1.5 O4 Hierarchical Nanofibers as 5 V Cathode Materials for Lithium-Ion Batteries. , 2013, ChemPlusChem.

[29]  G. Lei,et al.  A novel polyethylene terephthalate nonwoven separator based on electrospinning technique for lithium ion battery , 2013 .

[30]  Peixia Yang,et al.  Preparation and characterization of gel polymer electrolytes containing N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide ionic liquid for lithium ion batteries , 2013 .

[31]  Shalu,et al.  Thermal stability, complexing behavior, and ionic transport of polymeric gel membranes based on polymer PVdF-HFP and ionic liquid, [BMIM][BF4]. , 2013, The journal of physical chemistry. B.

[32]  L. Archer,et al.  Ionic Liquid‐Nanoparticle Hybrid Electrolytes and their Application in Secondary Lithium‐Metal Batteries , 2012, Advanced materials.

[33]  Shejun Hu,et al.  Preparation and performance of gel polymer electrolyte based on electrospun polymer membrane and ionic liquid for lithium ion battery , 2012 .

[34]  Jun Liu,et al.  A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life , 2012, Advanced materials.

[35]  W. Bennett,et al.  Hierarchically porous graphene as a lithium-air battery electrode. , 2011, Nano letters.

[36]  Z. H. Li,et al.  Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries , 2010 .

[37]  L. Nazar,et al.  Advances in Li–S batteries , 2010 .

[38]  Ashok Kumar,et al.  Enhanced electrical and electrochemical properties of PMMA–clay nanocomposite gel polymer electrolytes , 2010 .

[39]  Stefania Ferrari,et al.  Lithium ion conducting PVdF-HFP composite gel electrolytes based on N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)-imide ionic liquid , 2010 .

[40]  Min Gyu Kim,et al.  Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries , 2009 .

[41]  Zhong Ren,et al.  A microporous gel electrolyte based on poly(vinylidene fluoride-co-hexafluoropropylene)/fully cyanoethylated cellulose derivative blend for lithium-ion battery , 2009 .

[42]  Peng Zhang,et al.  A porous polymer electrolyte based on P(VDF-HFP) prepared by a simple phase separation process , 2008 .

[43]  Jianling Li,et al.  PVDF-HFP-based porous polymer electrolyte membranes for lithium-ion batteries , 2008 .

[44]  T. Abe,et al.  Suppression of dendritic lithium formation by using concentrated electrolyte solutions , 2008 .

[45]  Sang Hyo Lee,et al.  Effects of Triacetoxyvinylsilane as SEI Layer Additive on Electrochemical Performance of Lithium Metal Secondary Battery , 2007 .

[46]  A. Subramania,et al.  Microstructure of PVdF-co-HFP based electrolyte prepared by preferential polymer dissolution process , 2007 .

[47]  Kee Suk Nahm,et al.  Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based composite electrolytes for lithium batteries , 2006 .

[48]  B. Weyershausen,et al.  Industrial application of ionic liquids as performance additives , 2005 .

[49]  Charles W. Monroe,et al.  The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces , 2005 .

[50]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[51]  D. Aurbach,et al.  Attempts to Improve the Behavior of Li Electrodes in Rechargeable Lithium Batteries , 2002 .

[52]  J.-N. Chazalviel,et al.  Dendritic growth mechanisms in lithium/polymer cells , 1999 .

[53]  Juliandri,et al.  Fabrication of SiO2-TiO2/PVDF Copolymer Nanofiber Composite by Electrospinning Process , 2015 .

[54]  A. MacDowell,et al.  Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes. , 2014, Nature materials.

[55]  Xuefeng Ren,et al.  Gel polymer electrolyte based on polyvinylidenefluoride-co-hexafluoropropylene and ionic liquid for lithium ion battery , 2014 .

[56]  A. Hexemer,et al.  Resolution of the Modulus versus Adhesion Dilemma in Solid Polymer Electrolytes for Rechargeable Lithium Metal Batteries , 2012 .