Condition monitoring in reaming through acoustic emission signals

Abstract This study investigates the nature of the acoustic emission (AE) generated during the reaming of EN4 steel workpieces. For this purpose, experiments were conducted in a horizontal boring and milling machine to determine the effects of cutting parameters. The results show good correlation between the AE parameters and the severity of the contact conditions during chip formation.

[1]  David Dornfeld,et al.  A Model of Tool Fracture Generated Acoustic Emission During Machining , 1987 .

[2]  Stuart E. Dreyfus,et al.  A Customized Neural Network for Sensor Fusion in On-Line Monitoring of Cutting Tool Wear , 1995 .

[3]  I. Inasaki,et al.  A Study on Acoustic Emission from the Orthogonal Cutting Process , 1990 .

[4]  Robert Lewis Reuben,et al.  Assessment of Tool Wear in Milling Using Acoustic Emission Detected by a Fiber-Optic Interferometer , 1996 .

[5]  W. König,et al.  Tool monitoring of small drills with acoustic emission , 1992 .

[6]  D. V. Hutton,et al.  On the Effects of a Built-Up Edge on Acoustic Emission in Metal Cutting , 1990 .

[7]  D. Kececioglu.  Shear-Zone Size, Compressive Stress, and Shear Strain in Metal-Cutting and Their Effects on Mean Shear-Flow Stress , 1960 .

[8]  Toshimichi Moriwaki,et al.  Detection for Cutting Tool Fracture by Acoustic Emission Measurement , 1980 .

[9]  Elijah Kannatey-Asibu,et al.  Acoustic emission and force sensor fusion for monitoring the cutting process , 1989 .

[10]  David Dornfeld,et al.  Modeling and Experimental Analysis of Acoustic Emission from Metal Cutting , 1989 .

[11]  D. Dornfeld,et al.  Acoustic emission during orthogonal metal cutting , 1980 .

[12]  Yuichi Kanda,et al.  Identification of Chip Formation Mechanism through Acoustic Emission Measurements , 1984 .

[13]  David Dornfeld,et al.  Acoustic Emission from the Face Milling Process—the Effects of Process Variables , 1987 .