Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission

Abstract Fatigue limit determination via the conventional Wohler-curve method is associated with extended experimental times as it requires testing of a large number of specimens. The current paper introduces a methodology for fast, reliable and experimentally economic determination of the fatigue limit in monolithic and composite materials by means of combined usage of two nondestructive inspection methods, namely infrared (IR) lock-in thermography and acoustic emission (AE). IR thermography, as a real-time and non-contact technique, allowed the detection of heat waves generated due to thermo-mechanical coupling as well as of the energy dissipated intrinsically during dynamic loading of the material. AE, on the other hand, was employed to record the transient waves resulting from crack propagation events. Aluminum grade 1050 H16 and cross-ply SiC/BMAS ceramic matrix composites were subjected to fatigue loading at various stress levels and were monitored by an IR camera and AE sensors. The fatigue limit of the monolithic material, obtained by the lock-in infrared thermography technique and supported by acoustic emission was found to be in agreement with measurements obtained by the conventional S–N curve method. The fatigue limit of the ceramic matrix composite was validated with acoustic emission data.

[1]  Joseph F Labuz,et al.  Damage and Failure Analysis of Brittle Materials by Acoustic Emission , 1997 .

[2]  Theodore E. Matikas,et al.  Acoustic emission for fatigue damage characterization in metal plates , 2011 .

[4]  Theodore E. Matikas,et al.  Combined use of thermography and ultrasound for the characterization of subsurface cracks in concrete , 2010 .

[5]  Dong-Jin Yoon,et al.  Determining the stress intensity factor of a material with an artificial neural network from acoustic emission measurements , 2004 .

[6]  D. Hasselman,et al.  Effect of silicon carbide fiber or whisker reinforcement on the thermal diffusivity/conductivity of an osumilite glass-ceramic , 1987 .

[7]  Karl M. Prewo,et al.  Silicon carbide fibre reinforced glass-ceramic matrix composites exhibiting high strength and toughness , 1982 .

[8]  Masayasu Ohtsu,et al.  Acoustic Emission Testing , 2006, Advanced Materials Research.

[9]  Boris A. Zárate,et al.  Probabilistic Prognosis of Fatigue Crack Growth Using Acoustic Emission Data , 2012 .

[10]  Konstantinos G. Dassios,et al.  Direct measurement of fiber bridging in notched glass-ceramic-matrix composites , 2006 .

[11]  Pierre Bremond,et al.  Thermal evaluation of the mean fatigue limit of a complex structure , 2005, SPIE Defense + Commercial Sensing.

[12]  Raffaella Sesana,et al.  A new iteration method for the thermographic determination of fatigue limit in steels , 2005 .

[13]  Jinfu Liu,et al.  Adopting lock-in infrared thermography technique for rapid determination of fatigue limit of aluminum alloy riveted component and affection to determined result caused by initial stress , 2012 .

[14]  Masayasu Ohtsu,et al.  Quantitative damage evaluation of structural concrete by a compression test based on AE rate process analysis , 2004 .

[15]  Lai-fei Cheng,et al.  Real‐Time Monitoring of Thermal Cycling Damage in Ceramic Matrix Composites Under a Constant Stress , 2007 .

[16]  Peter K. Liaw,et al.  Tensile Fracture Behavior of Nicalon/SiC Composites , 2007 .

[17]  P. S. Rogers,et al.  The mechanical behaviour of glass and glass–ceramic matrix composites , 2000 .

[18]  Jean-Claude Krapez,et al.  Thermography detection of damage initiation during fatigue tests , 2002, SPIE Defense + Commercial Sensing.

[19]  Minh Phong Luong,et al.  Nondestructive damage evaluation of reinforced concrete structure using infrared thermography , 2000, Smart Structures.

[20]  Minh Phong Luong,et al.  Fatigue limit evaluation of metals using an infrared thermographic technique , 1998 .

[21]  K. Dassios,et al.  Intrinsic Parameters in the Fracture of Carbon/Carbon Composites. , 2005 .

[22]  E. Z. Kordatos,et al.  Developing damage metrics for metallic structures undergoing fatigue using real-time thermographic evaluation , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  C. Ibarra-Castanedo,et al.  Comparative study for the nondestructive testing of advanced ceramic materials by infrared thermography and holographic interferometry , 2010, Defense + Commercial Sensing.

[24]  Antonino Risitano,et al.  Rapid determination of the fatigue curve by the thermographic method , 2002 .

[25]  Masayasu Ohtsu,et al.  Crack classification in concrete based on acoustic emission , 2010 .

[26]  Alberto Marino,et al.  Fatigue analysis of butt welded AH36 steel joints: Thermographic Method and design S–N curve , 2009 .

[27]  Liyang Xie,et al.  Pattern recognition of fatigue damage acoustic emission signal , 2009, 2009 International Conference on Mechatronics and Automation.

[28]  Antonino Risitano,et al.  Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components , 2000 .

[29]  J.-C. Krapez,et al.  Lock-in thermography and fatigue limit of metals , 2000 .

[30]  T. Matikas,et al.  Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state , 2013 .

[31]  Theodore E. Matikas,et al.  Monitoring mechanical damage in structural materials using complimentary NDE techniques based on thermography and acoustic emission , 2012 .

[32]  Ramazan Yilmaz,et al.  Effect of heat treatment in air on the thermal properties of SiC fibre-reinforced composite. Part 1: a barium osumilite (BMAS) matrix glass ceramic composite , 2007 .

[33]  Pierre Bremond,et al.  Lock-in thermography: a tool to analyze and locate thermomechanical mechanisms in materials and structures , 2001, SPIE Defense + Commercial Sensing.

[34]  D. G. Aggelis,et al.  In-Situ Monitoring of Damage Evolution in Glass Matrix Composites during Cyclic Loading using Nondestructive Techniques , 2013, Applied Composite Materials.

[35]  Nele De Belie,et al.  Acoustic emission analysis for the quantification of autonomous crack healing in concrete , 2012 .

[36]  M. P. Luong,et al.  Infrared thermographic scanning of fatigue in metals , 1995 .

[37]  T. M. Roberts,et al.  Acoustic emission monitoring of fatigue crack propagation , 2003 .

[38]  Ge Wang,et al.  Acoustic emission monitoring for detecting structural defects in vessels and offshore structures , 2009 .