Optimal Placement of Multi DGs in Distribution System with Considering the DG Bus Available Limits

This paper presents an approach for optimal placement and size of the DGs considering system technical is- sues such as active and reactive power losses, the voltage profile and the line loading of the system. The solar and wind systems are modelled as constant power factor model and variable reactive power model respectively. The renewable en- ergy DGs placement is limited to a number of busses with the consideration of environmental constrains. In this work, only the solar and wind available busses are considered for optimization for placing the Renewable DGs. The impact indices of the total system are compared with and without considering the DGs limiting busses. This work is tested on 38-bus Distri- bution Systems. The simulation technique based on Genetic Algorithm is studied.

[1]  Caisheng Wang,et al.  Analytical approaches for optimal placement of distributed generation sources in power systems , 2004, IEEE Transactions on Power Systems.

[2]  Magdy M. A. Salama,et al.  Distributed generation technologies, definitions and benefits , 2004 .

[3]  Ahmed Yousuf Saber,et al.  Plug-in Vehicles and Renewable Energy Sources for Cost and Emission Reductions , 2011, IEEE Transactions on Industrial Electronics.

[4]  P. Georgilakis,et al.  Optimal sizing of small isolated hybrid power systems using tabu search , 2008 .

[5]  Felix F. Wu,et al.  Network Reconfiguration in Distribution Systems for Loss Reduction and Load Balancing , 1989, IEEE Power Engineering Review.

[6]  D. Singh,et al.  Multiobjective Optimization for DG Planning With Load Models , 2009, IEEE Transactions on Power Systems.

[7]  R. Jabr,et al.  Ordinal optimisation approach for locating and sizing of distributed generation , 2009 .

[8]  V. C. Veera Reddy,et al.  OPTIMAL DG PLACEMENT FOR MINIMUM REAL POWER LOSS IN RADIAL DISTRIBUTION SYSTEMS USING PSO , 2010 .

[9]  Jen-Hao Teng,et al.  Modelling distributed generations in three-phase distribution load flow , 2008 .

[10]  J. Cidras,et al.  Modeling of wind farms in the load flow analysis , 2000 .

[11]  Tuba Gozel,et al.  An analytical method for the sizing and siting of distributed generators in radial systems , 2009 .

[12]  Magdy M. A. Salama,et al.  Optimum siting and sizing of a large distributed generator in a mesh connected system , 2010 .

[13]  M.M.A. Salama,et al.  An integrated distributed generation optimization model for distribution system planning , 2005, IEEE Transactions on Power Systems.

[14]  Chandrasekhar Yammani,et al.  Optimal placement and sizing of the DER in distribution systems using Shuffled Frog Leap Algorithm , 2011, 2011 IEEE Recent Advances in Intelligent Computational Systems.

[15]  Swapan Kumar Goswami,et al.  Optimum allocation of distributed generations based on nodal pricing for profit, loss reduction, and voltage improvement including voltage rise issue , 2010 .

[16]  Ishak Aris,et al.  A Review of Strategies for Optimal Placement of Distributed Generation in Power Distribution Systems , 2010 .

[17]  A. Keane,et al.  Optimal allocation of embedded generation on distribution networks , 2005, IEEE Transactions on Power Systems.

[18]  Amany El-Zonkoly,et al.  Optimal placement of multi-distributed generation units including different load models using particle swarm optimisation , 2011 .