A method for agglomeration detection and control in full-scale biomass fired fluidized beds

The occurrence of agglomeration in fluidized-bed combustion and gasification of biomass and waste can have a very negative impact on the efficiency of reactor operation. The formation of agglomerates seriously affects the otherwise uniform heat distribution in the bed and may finally lead to defluidization and unscheduled shutdown of the plant. A recently developed monitoring method is able to detect the onset of such undesired behavior, making it possible to operate more efficiently. This Early Agglomeration Recognition System (EARS) uses a characteristic process variable (e.g., pressure) measured at high frequency. The sensitivity and selectivity of EARS is illustrated with experimental results and the first industrial test results in an 80-MWth wood-fired fluidized-bed combustion plant is discussed.

[1]  Kim Dam-Johansen,et al.  Timely detection of agglomeration in biomass fired fluidized beds , 2001 .

[2]  Jc Jaap Schouten,et al.  Monitoring the quality of fluidization using the short-term predictability of pressure fluctuations , 1998 .

[3]  Arne Andersson,et al.  Bed agglomeration problems in fluidized-bed biomass combustion , 2002 .

[4]  Cor M. van den Bleek,et al.  Early warning of agglomeration in fluidized beds by attractor comparison , 2000 .

[5]  J. Nijenhuis,et al.  Early detection of agglomeration in fluidized bed polymerization reactors , 2004 .

[6]  S. Ergun.  Fluid flow through packed columns , 1952 .

[7]  J. Werther,et al.  Combustion of agricultural residues , 2000 .

[8]  John Nijenhuis,et al.  Early Agglomeration Recognition System (EARS) , 2003 .

[9]  H. Bi,et al.  Propagation of pressure waves and forced oscillations in gas-solid fluidized beds and their influence on diagnostics of local hydrodynamics , 1995 .

[10]  Cor M. van den Bleek,et al.  Response characteristics of probe-transducer systems for pressure measurements in gas-solid fluidized beds: how to prevent pitfalls in dynamic pressure measurements , 1999 .

[11]  Cor M. van den Bleek,et al.  Erratum to “Response characteristics of probe–transducer systems for pressure measurements in gas–solid fluidized beds: how to prevent pitfalls in dynamic pressure measurements” [Powder Technology 106 (1999) 199–218] , 2000 .

[12]  J. C. Schouten,et al.  An early-warning-method for detecting bed agglomeration in fluidized bed combustors , 1999 .

[13]  C. Diks,et al.  Detecting differences between delay vector distributions. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[14]  Jc Jaap Schouten,et al.  Origin, propagation and attenuation of pressure waves in gas-solid fluidized beds , 1998 .

[15]  Anthony V. Bridgwater,et al.  Progress in Thermochemical Biomass Conversion , 2001 .