Direct-written polymer field-effect transistors operating at 20 MHz

Printed polymer electronics has held for long the promise of revolutionizing technology by delivering distributed, flexible, lightweight and cost-effective applications for wearables, healthcare, diagnostic, automation and portable devices. While impressive progresses have been registered in terms of organic semiconductors mobility, field-effect transistors (FETs), the basic building block of any circuit, are still showing limited speed of operation, thus limiting their real applicability. So far, attempts with organic FETs to achieve the tens of MHz regime, a threshold for many applications comprising the driving of high resolution displays, have relied on the adoption of sophisticated lithographic techniques and/or complex architectures, undermining the whole concept. In this work we demonstrate polymer FETs which can operate up to 20 MHz and are fabricated by means only of scalable printing techniques and direct-writing methods with a completely mask-less procedure. This is achieved by combining a fs-laser process for the sintering of high resolution metal electrodes, thus easily achieving micron-scale channels with reduced parasitism down to 0.19 pF mm−1, and a large area coating technique of a high mobility polymer semiconductor, according to a simple and scalable process flow.

[1]  C. Grigoropoulos,et al.  All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles , 2007 .

[2]  Yong-Young Noh,et al.  Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors , 2013, Advanced materials.

[3]  Xi Zhang,et al.  Fully printed electronics on flexible substrates: High gain amplifiers and DAC , 2014 .

[4]  Paul Heremans,et al.  Electronics on plastic foil, for applications in flexible OLED displays, sensor arrays and circuits , 2014, 2014 21st International Workshop on Active-Matrix Flatpanel Displays and Devices (AM-FPD).

[5]  Henning Sirringhaus,et al.  Efficient charge injection from a high work function metal in high mobility n-type polymer field-effect transistors , 2010 .

[6]  Yasuhiko Arakawa,et al.  High Current-Gain Cutoff Frequencies above 10 MHz in n-Channel C60 and p-Channel Pentacene Thin-Film Transistors , 2011 .

[7]  Jinsoo Noh,et al.  Fully printed flexible and disposable wireless cyclic voltammetry tag , 2015, Scientific Reports.

[8]  Victor Puntes,et al.  Synthesis of Highly Monodisperse Citrate-Stabilized Silver Nanoparticles of up to 200 nm: Kinetic Control and Catalytic Properties , 2014 .

[9]  Joachim N. Burghartz,et al.  Accurate Capacitance Modeling and Characterization of Organic Thin-Film Transistors , 2014, IEEE Transactions on Electron Devices.

[10]  Göran Gustafsson,et al.  All-printed diode operating at 1.6 GHz , 2014, Proceedings of the National Academy of Sciences.

[11]  Takao Someya,et al.  Contact resistance and megahertz operation of aggressively scaled organic transistors. , 2012, Small.

[12]  Yong-Young Noh,et al.  Fully-printed, all-polymer, bendable and highly transparent complementary logic circuits , 2015 .

[13]  Zhihua Chen,et al.  Macroscopic and high-throughput printing of aligned nanostructured polymer semiconductors for MHz large-area electronics , 2015, Nature Communications.

[14]  Mario Caironi,et al.  Charge Injection in Solution‐Processed Organic Field‐Effect Transistors: Physics, Models and Characterization Methods , 2012, Advanced materials.

[15]  B. B. Narakathu,et al.  Fully printed and flexible piezoelectric based touch sensitive skin , 2015, 2015 IEEE SENSORS.

[16]  Ulrich S Schubert,et al.  Inkjet printing as a deposition and patterning tool for polymers and inorganic particles. , 2008, Soft matter.

[17]  Frank Ellinger,et al.  Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric , 2015 .

[18]  Luigino Criante,et al.  Control of charge transport in a semiconducting copolymer by solvent-induced long-range order , 2013, Scientific Reports.

[19]  Marco Sampietro,et al.  All‐Organic and Fully‐Printed Semitransparent Photodetectors Based on Narrow Bandgap Conjugated Molecules , 2014, Advanced materials.

[20]  Yong-Young Noh,et al.  High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors , 2011 .

[21]  Yong-Young Noh,et al.  Frequency operation of low-voltage, solution-processed organic field-effect transistors , 2011 .

[22]  Seung Hwan Ko,et al.  Application of the specific thermal properties of Ag nanoparticles to high-resolution metal patterning , 2012 .

[23]  A. Song,et al.  Flexible indium–gallium–zinc–oxide Schottky diode operating beyond 2.45 GHz , 2015, Nature Communications.

[24]  Gui Yu,et al.  A stable solution-processed polymer semiconductor with record high-mobility for printed transistors , 2012, Scientific Reports.

[25]  Yanzhen Cao,et al.  Syntheses and characterization of nearly monodispersed, size-tunable silver nanoparticles over a wide size range of 7-200 nm by tannic acid reduction. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[26]  Vivek Subramanian,et al.  High‐Performance Printed Transistors Realized Using Femtoliter Gravure‐Printed Sub‐10 μm Metallic Nanoparticle Patterns and Highly Uniform Polymer Dielectric and Semiconductor Layers , 2012, Advanced materials.

[27]  Mike Hambsch,et al.  Uniformity of fully gravure printed organic field-effect transistors , 2010 .

[28]  M. Kang,et al.  Split‐Gate Organic Field‐Effect Transistors for High‐Speed Operation , 2014, Advanced materials.

[29]  Zhang Zhiliang,et al.  Controllable synthesis of silver nanoparticles in hyperbranched macromolecule templates for printed flexible electronics , 2015 .

[30]  Vivek Subramanian,et al.  Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices , 2005, Proceedings of the IEEE.

[31]  H. Sirringhaus.  25th Anniversary Article: Organic Field-Effect Transistors: The Path Beyond Amorphous Silicon , 2014, Advanced materials.

[32]  J. N. Burghartz,et al.  S-Parameter Characterization of Submicrometer Low-Voltage Organic Thin-Film Transistors , 2013, IEEE Electron Device Letters.

[33]  Antonio Facchetti,et al.  Printed diodes operating at mobile phone frequencies , 2014, Proceedings of the National Academy of Sciences.

[34]  Tobin J. Marks,et al.  Self‐Assembled Nanodielectrics for High‐Speed, Low‐Voltage Solution‐Processed Polymer Logic Circuits , 2015 .

[35]  Mario Caironi,et al.  Multi-length-scale relationships between the polymer molecular structure and charge transport: the case of poly-naphthalene diimide bithiophene. , 2015, Physical chemistry chemical physics : PCCP.

[36]  Joachim N. Burghartz,et al.  Megahertz operation of flexible low-voltage organic thin-film transistors , 2013 .

[37]  Seung Hwan Ko,et al.  Nanoscale Electronics: Digital Fabrication by Direct Femtosecond Laser Processing of Metal Nanoparticles , 2011, Advanced materials.

[38]  Donal D. C. Bradley,et al.  Polymer Field‐Effect Transistors Fabricated by the Sequential Gravure Printing of Polythiophene, Two Insulator Layers, and a Metal Ink Gate , 2010 .

[39]  Yong-Young Noh,et al.  Organic Light Detectors: Photodiodes and Phototransistors , 2013, Advanced materials.

[40]  T. Dadosh,et al.  Synthesis of uniform silver nanoparticles with a controllable size , 2009 .

[41]  H. Kempa,et al.  Complementary Ring Oscillator Exclusively Prepared by Means of Gravure and Flexographic Printing , 2011, IEEE Transactions on Electron Devices.

[42]  Juhwan Kim,et al.  Simple Bar‐Coating Process for Large‐Area, High‐Performance Organic Field‐Effect Transistors and Ambipolar Complementary Integrated Circuits , 2013, Advanced materials.

[43]  Wim Dehaene,et al.  Organic RFID transponder chip with data rate compatible with electronic product coding , 2010 .

[44]  Vivek Subramanian,et al.  Megahertz-class printed high mobility organic thin-film transistors and inverters on plastic using attoliter-scale high-speed gravure-printed sub-5 μm gate electrodes , 2014 .

[45]  Alasdair J. Campbell,et al.  Self-Aligned Organic Field-Effect Transistors on Plastic with Picofarad Overlap Capacitances and Megahertz Operating Frequencies , 2016 .

[46]  Zhihua Chen,et al.  High-speed organic single-crystal transistors gated with short-channel air gaps: Efficient hole and electron injection in organic semiconductor crystals , 2013 .

[47]  Satyaprasad P. Senanayak,et al.  Strategies for Fast‐Switching in All‐Polymer Field Effect Transistors , 2014 .

[48]  Gerard Ghibaudo,et al.  How small the contacts could be optimal for nanoscale organic transistors , 2013 .

[49]  Marja Vilkman,et al.  Self-Aligned Metal Electrodes in Fully Roll-to-Roll Processed Organic Transistors , 2016 .

[50]  Mayumi Uno,et al.  High-speed organic transistors with three-dimensional organic channels and organic rectifiers based on them operating above 20 MHz , 2015 .

[51]  Toshihiro Okamoto,et al.  High‐Mobility Organic Transistors with Wet‐Etch‐Patterned Top Electrodes: A Novel Patterning Method for Fine‐Pitch Integration of Organic Devices , 2014 .

[52]  S. Ko,et al.  Nonvacuum, maskless fabrication of a flexible metal grid transparent conductor by low-temperature selective laser sintering of nanoparticle ink. , 2013, ACS nano.

[53]  H. Matsui,et al.  Inkjet printing of single-crystal films , 2011, Nature.

[54]  Ning Li,et al.  Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors , 2014 .

[55]  Mario Caironi,et al.  Fully-printed, all-polymer integrated twilight switch , 2015 .

[56]  Masakazu Yamagishi,et al.  Patternable Solution‐Crystallized Organic Transistors with High Charge Carrier Mobility , 2011, Advanced materials.

[57]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.