论文信息 - The control of a process with time delay by using a modified Smith predictor compensator

The control of a process with time delay by using a modified Smith predictor compensator

A modification is proposed to the Smith predictor compensator structure for the control of a process with time delay. The modification facilitates the achievement of an improved closed loop system regulator response, with little degradation in the corresponding servo response. The compensator design procedure is discussed, and simulation results are provided to demonstrate the applicability of the method.

John Ringwood | Aidan O'Dwyer

[1] Evanghelos Zafiriou,et al. Robust process control , 1987 .

[2] Jeffrey C. Kantor,et al. The analysis and design of Smith predictors using singular Nyquist arrays , 1980 .

[3] John Ringwood,et al. Model parameter and time delay estimation in the frequency domain , 1995 .

[4] Masami Ito,et al. Modified Smith predictor control for multivariable systems with delays and unmeasurable step disturbances , 1983 .

[5] J. E. Marshall,et al. Control of Time-Delay Systems , 1981, IEEE Transactions on Systems, Man, and Cybernetics.

[6] S. V. Salehi,et al. Time-delay mismatch and the performance of predictor control schemes , 1983 .

[7] Alfredo C. Desages,et al. Controller designs for model-plant parameter mismatch , 1988 .

[8] Masami Ito,et al. A process-model control for linear systems with delay , 1981 .

[9] C. C. Hang,et al. A new Smith predictor for controlling a process with an integrator and long dead-time , 1994, IEEE Trans. Autom. Control..

[10] D. P. Atherton,et al. Autotuning design methods for a Smith predictor control scheme , 1994 .

[11] O Smith,et al. CLOSER CONTROL OF LOOPS WITH DEAD TIME , 1957 .

[12] Cheng-Liang Chen,et al. A modified Smith predictor with an approximate inverse of dead time , 1990 .

[13] Z. J. Palmor,et al. Improved dead-time compensator controllers , 1985 .