BIOMECHANICAL EVALUATION OF RECONSTRUCTED EXTENSIVE MANDIBULAR DEFECTS BY DIFFERENT MODELS USING FINITE ELEMENT METHOD

[1]  Nathaniel G. Narra,et al.  Finite element analysis of customized reconstruction plates for mandibular continuity defect therapy. , 2014, Journal of biomechanics.

[2]  D. Baur,et al.  Biomechanical behavior of mandibles reconstructed with fibular grafts at different vertical positions using finite element method. , 2019, Journal of plastic, reconstructive & aesthetic surgery : JPRAS.

[3]  D. Dean,et al.  Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery , 2016, Bioengineering.

[4]  W. Harris,et al.  In Vivo Skeletal Responses to Porous-Surfaced Implants Subjected to Small Induced Motions* , 1997, The Journal of bone and joint surgery. American volume.

[5]  G. di Carlo,et al.  Survival of dental implants in patients with oral cancer treated by surgery and radiotherapy: a retrospective study , 2015, BMC Oral Health.

[6]  Yadong Chen,et al.  INDIVIDUALIZED SURGICAL GUIDANCE FOR MANDIBULAR RECONSTRUCTION USING 3D FEA/PRINTING TECHNOLOGIES , 2017 .

[7]  M. Akkocaoglu,et al.  Finite element analysis of stress distribution on reconstructed mandibular models for autogenous bone grafts. , 2019, Technology and health care : official journal of the European Society for Engineering and Medicine.

[8]  A. Amis,et al.  Finite element modelling of primary hip stem stability: the effect of interference fit. , 2008, Journal of biomechanics.

[9]  G. Noh,et al.  Which plate results in better stability after segmental mandibular resection and fibula free flap reconstruction? Biomechanical analysis. , 2018, Oral surgery, oral medicine, oral pathology and oral radiology.

[10]  D. Buchbinder,et al.  Contemporary reconstruction of the mandible. , 2010, Oral oncology.

[11]  P. Dechow,et al.  Variations in cortical material properties throughout the human dentate mandible. , 2003, American journal of physical anthropology.

[12]  Massimo Robiony,et al.  Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction , 2007, Head & face medicine.

[13]  T. Nagasao,et al.  Adaquate fixation of plates for stability during mandibular reconstruction. , 2006, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[14]  J. Jansen,et al.  Modular endoprosthesis for mandibular body reconstruction: a clinical, micro-CT and histologic evaluation in eight Macaca fascicularis. , 2009, International journal of oral and maxillofacial surgery.

[15]  M. Morlock,et al.  Friction coefficient and effective interference at the implant-bone interface. , 2015, Journal of biomechanics.

[16]  Shivakumar Raman,et al.  Computer Aided Biomodeling and Analysis of Patient Specific Porous Titanium Mandibular Implants , 2009 .

[17]  Syed Hammad Mian,et al.  Digital Design, Analysis and 3D Printing of Prosthesis Scaffolds for Mandibular Reconstruction , 2019, Metals.

[18]  J. Alves,et al.  The feasibility of a custom-made endoprosthesis in mandibular reconstruction: Implant design and finite element analysis. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[19]  Alfred A Bartolucci,et al.  Reconstruction of the maxilla and mandible with particulate bone graft and titanium mesh for implant placement. , 2008, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[20]  C. Marchetti,et al.  The CAD-CAM technique for mandibular reconstruction: an 18 patients oncological case-series. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[21]  Lu Bingheng,et al.  Design and fabrication of custom mandible titanium tray based on rapid prototyping. , 2004, Medical engineering & physics.

[22]  Saqib Anwar,et al.  Computer Assisted Design and Analysis of Customized Porous Plate for Mandibular Reconstruction , 2017 .

[23]  Abdulrahman Al-Ahmari,et al.  A comparative study on the customized design of mandibular reconstruction plates using finite element method , 2015 .

[24]  G. Evans,et al.  Advances in Head and Neck Reconstruction , 2000, Plastic and reconstructive surgery.

[25]  L. N. Gías,et al.  Osseointegrated implant rehabilitation of irradiated oral cancer patients. , 2012, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[26]  Niels Modler,et al.  One vs. two piece customized implants to reconstruct mandibular continuity defects: a preliminary study in pig cadavers. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[27]  Wei Tang,et al.  Optimal design of an individual endoprosthesis for the reconstruction of extensive mandibular defects with finite element analysis. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[28]  N. Nazir,et al.  Biomechanical assessment of fixation methods for segmental mandible reconstruction with fibula in the polyurethane model , 2016, Microsurgery.

[29]  T.M.G.J. van Eijden,et al.  Biomechanics of the Mandible , 2000 .

[30]  J O Katz,et al.  Anisotropic elastic properties of cancellous bone from a human edentulous mandible. , 2000, Clinical oral implants research.

[31]  Massimiliano Fantini,et al.  Design and manufacturing of customized surgical devices for mandibular rehabilitation , 2013 .

[32]  U. Eckelt,et al.  Analysis of Complications after Reconstruction of Bone Defects Involving Complete Mandibular Resection Using Finite Element Modelling , 2007, Oncology Research and Treatment.

[33]  Ying Tie,et al.  Three-dimensional finite-element analysis investigating the biomechanical effects of human mandibular reconstruction with autogenous bone grafts. , 2006, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[34]  T. Ettl,et al.  Feasibility of alloplastic mandibular reconstruction in patients following removal of oral squamous cell carcinoma. , 2010, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[35]  Erol Cansiz,et al.  A REVIEW OF FINITE ELEMENT APPLICATIONS IN ORAL AND MAXILLOFACIAL BIOMECHANICS , 2018 .

[36]  L. Kaban,et al.  Customized repair of fractured mandibular reconstruction plates. , 2012, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[37]  R. Wong,et al.  Biomechanics of alloplastic mandible reconstruction using biomaterials: The effect of implant design on stress concentration influences choice of material. , 2019, Journal of the mechanical behavior of biomedical materials.

[38]  Feng-Huei Lin,et al.  The rationale of mandible reconstruction in advanced oral cancer: alloplastic material versus autogenous vascularized bone graft , 2000 .

[39]  M W Bidez,et al.  Mechanical properties of trabecular bone in the human mandible: implications for dental implant treatment planning and surgical placement. , 1999, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[40]  Peng Li,et al.  Establishment of sequential software processing for a biomechanical model of mandibular reconstruction with custom-made plate , 2013, Comput. Methods Programs Biomed..

[41]  Károly Váradi,et al.  The biomechanical aspects of reconstruction for segmental defects of the mandible: a finite element study to assess the optimisation of plate and screw factors. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[42]  A. Kuthe,et al.  Finite element analysis of customized implant in mandibular reconstruction after tumor resection with and without using customized surgical osteotomy guide , 2018, The international journal of medical robotics + computer assisted surgery : MRCAS.

[43]  T. Nagasao,et al.  A comparison of stresses in implantation for grafted and plate-and-screw mandible reconstruction. , 2010, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.

[44]  J. Abbink,et al.  Predictive factors for premature loss of Martin 2.7 mandibular reconstruction plates. , 2015, The British journal of oral & maxillofacial surgery.

[45]  M. Qaisi,et al.  Fibula Jaw in a Day: State of the Art in Maxillofacial Reconstruction. , 2016, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[46]  R. Gutwald,et al.  Biomechanical testing of different osteosynthesis systems for segmental resection of the mandible. , 2007, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[47]  James S. Brown,et al.  A new classification for mandibular defects after oncological resection. , 2016, The Lancet. Oncology.

[48]  J. Simões,et al.  Straight, semi-anatomic and anatomic TMJ implants: the influence of condylar geometry and bone fixation screws. , 2011, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.