Ultrathin and Super Strong UHMWPE Supported Composite Anion Exchange Membranes with Outstanding Fuel Cells Performance.

For high-performance anion exchange membrane fuel cells (AEMFCs), the anion exchange membrane (AEMs) should be as thin as possible to reduce the ohmic resistance. However, the mechanical stability of ultrathin AEMs cannot be guaranteed, as well as a huge risk of gas (H2 &O2 ) permeation. In this work, composite AEMs based on ultrahigh molecular weight polyethylene (UHMWPE) are prepared by in situ bulk polymerization. The as-prepared composite membranes can be as thin as 4 µm, and possess super high strength beyond 150 MPa. It also shows extremely low hydrogen permeation, low water uptake, low dimensional swelling, high conductivity, and good alkaline stability. In addition, the fuel cell performance based on the ultrathin composite AEMs exhibits outstanding peak power density of 1014 and 534 mW cm-2 for H2 -O2 and H2 -Air (CO2 -free) at 65 °C, respectively, as well as good short-term durability.

[1]  Won Hee Lee,et al.  Poly(fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells , 2021, Nature Communications.

[2]  Y. Lee,et al.  Anion exchange polyelectrolytes for membranes and ionomers , 2021 .

[3]  Won Hee Lee,et al.  Poly(Alkyl‐Terphenyl Piperidinium) Ionomers and Membranes with an Outstanding Alkaline‐Membrane Fuel‐Cell Performance of 2.58 W cm−2 , 2020, Angewandte Chemie.

[4]  K. Geng,et al.  Symmetric sponge-like porous polybenzimidazole membrane for high temperature proton exchange membrane fuel cells , 2020 .

[5]  P. Kohl,et al.  Achieving High‐Performance and 2000 h Stability in Anion Exchange Membrane Fuel Cells by Manipulating Ionomer Properties and Electrode Optimization , 2020, Advanced Energy Materials.

[6]  Travis J Omasta,et al.  Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells , 2020, Nature Communications.

[7]  Liang Wu,et al.  Covalent bonding-triggered pore-filled membranes for alkaline fuel cells , 2020 .

[8]  Xigui Yue,et al.  Thin and methanol-resistant reinforced composite membrane based on semi-crystalline poly (ether ether ketone) for fuel cell applications , 2020 .

[9]  Brian P. Setzler,et al.  Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells , 2019, Nature Energy.

[10]  T. Yamaguchi,et al.  Thin pore-filling membrane with highly packed-acid structure for high temperature and low humidity operating polymer electrolyte fuel cells , 2018, Journal of Power Sources.

[11]  Ji Hoon Kim,et al.  Ion-exchange composite membranes pore-filled with sulfonated poly(ether ether ketone) and Engelhard titanosilicate-10 for improved performance of vanadium redox flow batteries , 2018 .

[12]  J. Varcoe,et al.  Commercial monomer availability leading to missed opportunities? Anion-exchange membranes made from meta-vinylbenzyl chloride exhibit an alkali stability enhancement. , 2018 .

[13]  Zhe Sun,et al.  Anion-Exchange Membranes for Alkaline Fuel-Cell Applications: The Effects of Cations. , 2018, ChemSusChem.

[14]  Dukjoon Kim,et al.  Pore-filling polymer electrolyte membrane based on poly (arylene ether ketone) for enhanced dimensional stability and reduced methanol permeability , 2017 .

[15]  Ki‐Hyun Kim,et al.  Highly reinforced pore-filling membranes based on sulfonated poly(arylene ether sulfone)s for high-temperature/low-humidity polymer electrolyte membrane fuel cells , 2017 .

[16]  Ki‐Hyun Kim,et al.  Proton conductive cross-linked benzoxazine-benzimidazole copolymers as novel porous substrates for reinforced pore-filling membranes in fuel cells operating at high temperatures , 2017 .

[17]  T. Yamaguchi,et al.  Improvement in the solid-state alkaline fuel cell performance through efficient water management strategies , 2017 .

[18]  T. Yamaguchi,et al.  Poly(p-phenylene sulfonic acid-ran-2,5-benzophenone) pore-filling membranes with highly packed acid structure and their polymer electrolyte fuel cell performances , 2016 .

[19]  Brian P. Setzler,et al.  Activity targets for nanostructured platinum-group-metal-free catalysts in hydroxide exchange membrane fuel cells. , 2016, Nature nanotechnology.

[20]  M. Guiver,et al.  A Highly Permeable Aligned Montmorillonite Mixed-Matrix Membrane for CO2 Separation. , 2016, Angewandte Chemie.

[21]  Anita J. Hill,et al.  Nanocrack-regulated self-humidifying membranes , 2016, Nature.

[22]  S. Moon,et al.  SPPO pore-filled composite membranes with electrically aligned ion channels via a lab-scale continuous caster for fuel cells: An optimal DC electric field strength-IEC relationship , 2016 .

[23]  M. Guiver,et al.  Anisotropic radio-chemically pore-filled anion exchange membranes for solid alkaline fuel cell (SAFC) , 2015 .

[24]  K. Kreuer,et al.  Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids. , 2015, ChemSusChem.

[25]  Zhigang Shao,et al.  High durability and hydroxide ion conducting pore-filled anion exchange membranes for alkaline fuel cell applications , 2014 .

[26]  Shanfu Lu,et al.  Polytetrafluoroethylene (PTFE) reinforced poly(ethersulphone)–poly(vinyl pyrrolidone) composite membrane for high temperature proton exchange membrane fuel cells , 2014 .

[27]  Y. Shul,et al.  Effect of number of cross-linkable sites on proton conducting, pore-filling membranes , 2014 .

[28]  Dimitre Karamanev,et al.  Novel pore-filled polyelectrolyte composite membranes for cathodic microbial fuel cell application , 2013 .

[29]  Seung-Hyeon Moon,et al.  Stability of composite anion exchange membranes with various functional groups and their performance for energy conversion , 2013 .

[30]  Yan-Jie Wang,et al.  Alkaline polymer electrolyte membranes for fuel cell applications. , 2013, Chemical Society reviews.

[31]  B. Yi,et al.  Quaternary ammonia polysulfone-PTFE composite alkaline anion exchange membrane for fuel cells application , 2013 .

[32]  S. Moon,et al.  Electrochemical properties of pore-filled anion exchange membranes and their ionic transport phenomena for vanadium redox flow battery applications , 2013 .

[33]  Zhaolin Liu,et al.  Alkaline anion-exchange polymer membrane with grid–plug microstructure for hydrogen fuel cell application , 2011 .

[34]  Takeo Yamaguchi,et al.  Low fuel crossover anion exchange pore-filling membrane for solid-state alkaline fuel cells , 2011 .

[35]  Frédéric Jaouen,et al.  Iron-Based Catalysts with Improved Oxygen Reduction Activity in Polymer Electrolyte Fuel Cells , 2009, Science.

[36]  R. Slade,et al.  Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells , 2005 .

[37]  S. Nam,et al.  Anion exchange composite membranes composed of poly(phenylene oxide) containing quaternary ammonium and polyethylene support for alkaline anion exchange membrane fuel cell applications , 2020 .

[38]  Zhigang Shao,et al.  High-performance alkaline fuel cells using crosslinked composite anion exchange membrane , 2013 .