A Nonlinear Extended State Observer for Sensorless IPMSM Drives With Optimized Gains

A nonlinear third-order extended state observer (TESO) is proposed for the rotor position and speed estimation for sensorless interior permanent magnet synchronous motor drives. The disturbance observation bandwidth of the proposed observer is expanded by deploying a gain optimization method. The measurement noise excited in the control loop is suppressed effectively by substituting the previous high gain configuration. Experimentally, both the steady-state and transient performance of the TESO are verified on testing rigs. In comparison with the performance of a conventional linear extended state observer, the TESO has a better capability of disturbance observation and noise suppression in a wide operating range.

[1]  Nobuyuki Matsui,et al.  Rotor Geometry Design of Saliency-Based Sensorless Controlled Distributed-Winding IPMSM for Hybrid Electric Vehicles , 2018, IEEE Transactions on Industry Applications.

[2]  Seung-Ki Sul,et al.  Sensorless control of IPMSM for last 10 years and next 5 years , 2017 .

[3]  Chen Songlin,et al.  A sufficient condition for the stability of the Third-order Extended State Observer , 2013, Proceedings of the 32nd Chinese Control Conference.

[4]  Seung-Ki Sul,et al.  Model-Based Sensorless Control of an IPMSM With Enhanced Robustness Against Load Disturbances Based on Position and Speed Estimator Using a Speed Error , 2018, IEEE Transactions on Industry Applications.

[5]  Yihua Hu,et al.  Configurations and control of traction motors for electric vehicles: A review , 2017 .

[6]  Torbjörn Thiringer,et al.  Motion Sensorless IPMSM Control Using Linear Moving Horizon Estimation With Luenberger Observer State Feedback , 2018, IEEE Transactions on Transportation Electrification.

[7]  Rae-Young Kim,et al.  Improved Saliency-Based Position Sensorless Control of Interior Permanent-Magnet Synchronous Machines With Single DC-Link Current Sensor Using Current Prediction Method , 2018, IEEE Transactions on Industrial Electronics.

[8]  N. Matsui,et al.  Sensorless control of interior permanent magnet synchronous motor: An overview and design study , 2017, 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

[9]  Long Wu,et al.  An Adaptive Quasi-Sliding-Mode Rotor Position Observer-Based Sensorless Control for Interior Permanent Magnet Synchronous Machines , 2013, IEEE Transactions on Power Electronics.

[10]  Seung-Ki Sul,et al.  Analysis on Position Estimation Error in Position-Sensorless Operation of IPMSM Using Pulsating Square Wave Signal Injection , 2019, IEEE Transactions on Industry Applications.

[11]  Jingqing Han,et al.  From PID to Active Disturbance Rejection Control , 2009, IEEE Trans. Ind. Electron..

[12]  Zhiqiang Gao,et al.  Scaling and bandwidth-parameterization based controller tuning , 2003, Proceedings of the 2003 American Control Conference, 2003..

[13]  Seung-Ki Sul,et al.  Design, Modeling, and Control of an IPMSM With an Asymmetric Rotor and Search Coils for Absolute Position Sensorless Drive , 2016, IEEE Transactions on Industry Applications.

[14]  Kozo Ide,et al.  High bandwidth sensorless algorithm for AC machines based on square-wave type voltage injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[15]  Seung-Ki Sul,et al.  Extending Operational Limit of IPMSM in Signal-Injection Sensorless Control by Manipulation of Convergence Point , 2019, IEEE Transactions on Industry Applications.

[16]  Zhuang Xu,et al.  An Optimized Nonlinear Extended State Observer for Sensorless IPM Synchronous Motor Drives , 2019, 2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia).