All-Fiber Curvature Sensor Based on an Abrupt Tapered Fiber and a Fabry–Pérot Interferometer

In this letter, a highly sensitive curvature sensor arrangement based on an abrupt tapered fiber (ATF) concatenated with an all-fiber micro Fabry-Pérot interferometer (MFPI) is presented. Here, as the ATF is bent, the MFPI spectral fringes contrast decreases. In addition, the curvature sensitivity is considerably enhanced due to the use of the ATF. Finally, it is shown that with this arrangement, at 1530-nm wavelength, it is possible to detect curvature changes with a sensitivity of 11.27 dB/m-1 and a curvature resolution of 8.87 × 10-3 m-1 within the measurement range of 0 - 3.5 m-1.

[1]  Dietrich Marcuse,et al.  Curvature loss formula for optical fibers , 1976 .

[2]  Kai Ni,et al.  Temperature-independent curvature sensor based on tapered photonic crystal fiber interferometer , 2012 .

[3]  A. Martínez-Ríos,et al.  Compact optical fiber curvature sensor based on concatenating two tapers. , 2011, Optics letters.

[4]  A. Méndez,et al.  Specialty optical fibers handbook , 2007 .

[5]  Heather Patrick,et al.  Long period fibre gratings for structural bend sensing , 1998 .

[6]  Byeong Ha Lee,et al.  Fibre-optic sensing applications of a pair of long-period fibre gratings , 2001 .

[7]  I. Bennion,et al.  Wide-band Fabry-Perot-like filters in optical fiber , 1995, IEEE Photonics Technology Letters.

[8]  Yan Zhou,et al.  In-line fiber Mach-Zehnder interferometer combining with fiber Bragg grating for simultaneous curvature and temperature measurement , 2011, International Conference on Optical Instruments and Technology.

[9]  Jian Ju,et al.  A Compact Fiber-Tip Micro-Cavity Sensor for High-Pressure Measurement , 2011, IEEE Photonics Technology Letters.

[10]  Wenjun Zhou,et al.  Fiber-Optic Curvature Sensor Based on Cladding-Mode Bragg Grating Excited by Fiber Multimode Interferometer , 2012, IEEE Photonics Journal.

[11]  Young-Geun Han,et al.  Bending sensitivity of long-period fiber gratings inscribed in holey fibers depending on an axial rotation angle. , 2007, Optics express.

[12]  Ian Bennion,et al.  Bending and orientational characteristics of long period gratings written in D-shaped optical fiber [directional bend sensors] , 2004, IEEE Transactions on Instrumentation and Measurement.

[13]  J. Estudillo-Ayala,et al.  Highly sensitive curvature and displacement sensing setup based on an all fiber micro Fabry–Perot interferometer , 2013 .

[14]  Everardo Vargas-Rodríguez,et al.  An All Fiber Intrinsic Fabry-Perot Interferometer Based on an Air-Microcavity , 2013, Sensors.

[15]  Min Liu,et al.  In-Line Fiber Optic Interferometric Sensors in Single-Mode Fibers , 2012, Sensors.

[16]  P. M. Shankar,et al.  Bending effects in biconically tapered single-mode fibers , 1990 .

[17]  Wojtek J. Bock,et al.  Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating , 2010 .

[18]  Paul Chambers,et al.  Theoretical analysis of a methane gas detection system, using the complementary source modulation method of correlation spectroscopy , 2004 .

[19]  Anbo Wang,et al.  Self-calibrated interferometric-intensity-based optical fiber sensors , 2001 .

[20]  T. Giallorenzi,et al.  A sensitive fiber-optic Fabry-Perot interferometer , 1981, IEEE Journal of Quantum Electronics.

[21]  Michel J. F. Digonnet,et al.  Rare earth doped fiber lasers and amplifiers , 1993 .