A model for thermoplastic melt impregnation of fiber bundles during consolidation of powder-impregnated continuous fiber composites

Continuous fiber thermoplastic matrix composites were fabricated using a novel powder-impregnation process that combined vacuum assisted resin transfer molding (VARTM) with compression molding. The resulting composite has an average fiber volume fraction of 65%. A model has been developed for the consolidation phase to predict the void fraction of the resulting composite. This model takes into account the fabric unit cell dimensions and material properties and assumes that tow permeability remains constant. The model is compared to experimental values for void fraction for samples prepared using a range of consolidation pressures and dwell times.

[1]  John P. Coulter,et al.  Resin impregnation during composites manufacturing: Theory and experimentation , 1989 .

[2]  J. Nunes,et al.  A theoretical and experimental study of new towpreg-based long fibre thermoplastic composites , 2005 .

[3]  Timothy G. Gutowski,et al.  Advanced composites manufacturing , 1997 .

[4]  D. Bigg,et al.  Long-fiber-reinforced thermoplastic matrix composites by slurry deposition , 1989 .

[5]  V. Michaud,et al.  An Impregnation Model for the Consolidation of Thermoplastic Composites Made from Commingled Yarns , 1999 .

[6]  R. Parnas.  Liquid Composite Molding , 2000 .

[7]  E. Bradbury,et al.  High Performance Thermoplastic Matrix Composites , 1988 .

[8]  S. Advani,et al.  Experimental investigation and flow visualization of the resin-transfer mold-filling process in a non-planar geometry , 1997 .

[9]  Y. Mai,et al.  Consolidation of unidirectional CF/PEEK composites from commingled yarn prepreg , 1995 .

[10]  S. Advani,et al.  The consolidation of commingled thermoplastic fabrics , 1991 .

[11]  G. Hinrichsen,et al.  Manufacture of high performance fibre-reinforced thermoplastics by aqueous powder impregnation , 1993 .

[12]  L. Drzal,et al.  Manufacture of Powder-Impregnated Thermoplastic Composites , 1990 .

[13]  Richey M. Davis,et al.  Fabrication of PEEK/carbon fibre composites by aqueous suspension prepregging* , 1993 .

[14]  K. Ramani,et al.  An electrostatic powder spray process for manufacturing thermoplastic composites , 1995 .

[15]  Chris D. Rudd,et al.  Towards a Manufacturing Technology for High-Volume Production of Composite Components , 1992 .

[16]  I. Y. Chang,et al.  Recent Development in Thermoplastic Composites: A Review of Matrix Systems and Processing Methods , 1988 .

[17]  Jean-Michel Bergheau,et al.  Numerical modelling of liquid infusion into fibrous media undergoing compaction , 2008 .

[18]  Adrian E. Scheidegger,et al.  The physics of flow through porous media , 1957 .

[19]  L. Drzal,et al.  A simulation study on the effects of particle size on the consolidation of polymer powder impregnated tapes , 1999 .

[20]  Henk Bijsterbosch,et al.  Impregnation of glass rovings with a polyamide melt. Part 1: Impregnation bath , 1993 .

[21]  S. J. Wineman,et al.  Consolidation Experiments for Laminate Composites , 1987 .

[22]  L. Ye,et al.  Processing of thermoplastic composites from powder/sheath-fibre bundles , 1995 .

[23]  Michael D. Gilchrist,et al.  Manufacturing of Thermoplastic Composites from Commingled Yarns-A Review , 1998 .

[24]  M. Neitzel,et al.  Macro- and micro-impregnation phenomena in continuous manufacturing of fabric reinforced thermoplastic composites , 1998 .