Rational Design of Small Molecular Donor for Solution‐Processed Organic Photovoltaics with 8.1% Efficiency and High Fill Factor via Multiple Fluorine Substituents and Thiophene Bridge

A series of tetrafluorine‐substituted small molecules with a D1‐A‐D2‐A‐D1 linear framework based on indacenodithiophene and difluorobenzothiadiazole is designed and synthesized for application as donor materials in solution‐processed small‐molecule organic solar cells. The impacts of thiophene π‐bridge and multiple fluorinated modules on the photophysical properties, the energy levels of the highest occupied molecular orbitals (HOMO) and lowest unoccupied molecular orbitals (LUMO), charge carrier mobility, the morphologies of blend films, and their photovoltaic properties as electron donor material in the photoactive layer are investigated. By incorporating multiple fluorine substituents of benzothiadiazole and inserting two thiophene spacers, the fill factor (FF), open‐circuit voltage, and short‐circuit current density are dramatically improved in comparison with fluorinated‐free materials. With the solvent vapor annealing treatment, further enhancement in charge carrier mobility and power conversion efficiency (PCE) are achieved. Finally, a high PCE of 8.1% with very‐high FF of 0.76 for BIT‐4F‐T/PC71BM is achieved without additional additive, which is among one of the highest reported for small‐molecules‐based solar cells with PCE over 8%. The results reported here clearly indicate that high PCE in solar cells based small molecules can be significantly increased through careful engineering of the molecular structure and optimization on the morphology of blend films by solvent vapor annealing.

[1]  C. Adachi,et al.  π‐Extended Narrow‐Bandgap Diketopyrrolopyrrole‐Based Oligomers for Solution‐Processed Inverted Organic Solar Cells , 2014 .

[2]  Deqing Zhang,et al.  New dithienyl-diketopyrrolopyrrole-based conjugated molecules entailing electron withdrawing moieties for organic ambipolar semiconductors and photovoltaic materials , 2014 .

[3]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[4]  Qian Zhang,et al.  Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%. , 2014, Journal of the American Chemical Society.

[5]  M. Lindén,et al.  Efficiency Improvement of Solution‐Processed Dithienopyrrole‐Based A‐D‐A Oligothiophene Bulk‐Heterojunction Solar Cells by Solvent Vapor Annealing , 2014 .

[6]  Yun‐Hi Kim,et al.  DTBDT-TTPD: a new dithienobenzodithiophene-based small molecule for use in efficient photovoltaic devices , 2014 .

[7]  Christopher M. Proctor,et al.  Mobility Guidelines for High Fill Factor Solution‐Processed Small Molecule Solar Cells , 2014, Advanced materials.

[8]  Jin Young Kim,et al.  Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device , 2014 .

[9]  Hang Gao,et al.  High performance asymmetrical push-pull small molecules end-capped with cyanophenyl for solution-processed solar cells. , 2014, Chemical communications.

[10]  Yang Yang,et al.  An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11% , 2014, Advanced materials.

[11]  R. B. Grubbs,et al.  Effects of heteroatom substitution in conjugated heterocyclic compounds on photovoltaic performance: from sulfur to tellurium. , 2014, Chemical communications.

[12]  Long Ye,et al.  Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain , 2014 .

[13]  Philippe Blanchard,et al.  Molecular Materials for Organic Photovoltaics: Small is Beautiful , 2014, Advanced materials.

[14]  Wallace W. H. Wong,et al.  The role of solvent vapor annealing in highly efficient air-processed small molecule solar cells , 2014 .

[15]  Daoben Zhu,et al.  Acceptor-donor-acceptor small molecules based on indacenodithiophene for efficient organic solar cells. , 2014, ACS applied materials & interfaces.

[16]  Jianhui Hou,et al.  Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene. , 2014, Accounts of chemical research.

[17]  K. Müllen,et al.  Tailored donor-acceptor polymers with an A-D1-A-D2 structure: controlling intermolecular interactions to enable enhanced polymer photovoltaic devices. , 2014, Journal of the American Chemical Society.

[18]  A. Heeger,et al.  Design and properties of intermediate-sized narrow band-gap conjugated molecules relevant to solution-processed organic solar cells. , 2014, Journal of the American Chemical Society.

[19]  Wei Ma,et al.  An Easy and Effective Method to Modulate Molecular Energy Level of the Polymer Based on Benzodithiophene for the Application in Polymer Solar Cells , 2014, Advanced materials.

[20]  Junbiao Peng,et al.  Solution-processed bulk heterojunction solar cells based on a porphyrin small molecule with 7% power conversion efficiency , 2014 .

[21]  Jae Kwan Lee,et al.  High-Performance Organic Solar Cells with Efficient Semiconducting Small Molecules Containing an Electron-Rich Benzodithiophene Derivative , 2014 .

[22]  Thanh Luan Nguyen,et al.  Benzotriazole-Containing Planar Conjugated Polymers with Noncovalent Conformational Locks for Thermally Stable and Efficient Polymer Field-Effect Transistors , 2014 .

[23]  A. Heeger,et al.  Silaindacenodithiophene-based molecular donor: morphological features and use in the fabrication of compositionally tolerant, high-efficiency bulk heterojunction solar cells. , 2014, Journal of the American Chemical Society.

[24]  Shi-jian Su,et al.  Indacenodithiophene core-based small molecules with tunable side chains for solution-processed bulk heterojunction solar cells , 2014 .

[25]  Jianhui Hou,et al.  Synergistic Effect of Fluorination on Molecular Energy Level Modulation in Highly Efficient Photovoltaic Polymers , 2014, Advanced materials.

[26]  Guillermo C Bazan,et al.  Design and synthesis of molecular donors for solution-processed high-efficiency organic solar cells. , 2014, Accounts of chemical research.

[27]  M. Grätzel,et al.  4,9-Dihydro-4,4,9,9-tetrahexyl-s-indaceno[1,2-b:5,6-b']dithiophene as a π-spacer of donor-π-acceptor dye and its photovoltaic performance with liquid and solid-state dye-sensitized solar cells. , 2014, Organic letters.

[28]  Yang Yang,et al.  Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency , 2013, Scientific Reports.

[29]  Ning Wang,et al.  Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments. , 2013, Journal of the American Chemical Society.

[30]  Christopher M. Proctor,et al.  Tri‐Diketopyrrolopyrrole Molecular Donor Materials for High‐Performance Solution‐Processed Bulk Heterojunction Solar Cells , 2013, Advanced materials.

[31]  Jianhui Hou,et al.  Solution-processed indacenodithiophene-based small molecule for bulk heterojunction solar cells , 2013 .

[32]  A. Heeger,et al.  Enhanced Efficiency Parameters of Solution‐Processable Small‐Molecule Solar Cells Depending on ITO Sheet Resistance , 2013 .

[33]  Q. Peng,et al.  Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells. , 2013, Journal of the American Chemical Society.

[34]  Christopher M. Proctor,et al.  A High‐Performing Solution‐Processed Small Molecule:Perylene Diimide Bulk Heterojunction Solar Cell , 2013, Advanced materials.

[35]  M. Wienk,et al.  High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. , 2013, Angewandte Chemie.

[36]  Yongsheng Chen,et al.  High performance photovoltaic applications using solution-processed small molecules. , 2013, Accounts of chemical research.

[37]  A. Jen,et al.  Molecular Weight Effect on the Absorption, Charge Carrier Mobility, and Photovoltaic Performance of an Indacenodiselenophene-Based Ladder-Type Polymer , 2013 .

[38]  A. Heeger,et al.  Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells. , 2013, Nano letters.

[39]  Meng-Chyi Wu,et al.  Solution-processed benzotrithiophene-based donor molecules for efficient bulk heterojunction solar cells , 2013 .

[40]  Alan J. Heeger,et al.  Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells , 2013, Scientific Reports.

[41]  T. Koganezawa,et al.  Naphthodithiophene-naphthobisthiadiazole copolymers for solar cells: alkylation drives the polymer backbone flat and promotes efficiency. , 2013, Journal of the American Chemical Society.

[42]  Qian Zhang,et al.  Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit. , 2013, Journal of the American Chemical Society.

[43]  Yongfang Li,et al.  Solution-Processable Organic Molecule Photovoltaic Materials with Bithienyl-benzodithiophene Central Unit and Indenedione End Groups , 2013 .

[44]  J. Jung,et al.  A Fluorinated Phenylene Unit as a Building Block for High‐Performance n‐Type Semiconducting Polymer , 2013, Advanced materials.

[45]  Yanchun Han,et al.  Constructing the nanointerpenetrating structure of PCDTBT:PC70BM bulk heterojunction solar cells induced by aggregation of PC70BM via mixed-solvent vapor annealing , 2013 .

[46]  Stuart R. Thomas,et al.  The Influence of Polymer Purification on Photovoltaic Device Performance of a Series of Indacenodithiophene Donor Polymers , 2013, Advanced materials.

[47]  J. Fréchet,et al.  Linear side chains in benzo[1,2-b:4,5-b']dithiophene-thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance. , 2013, Journal of the American Chemical Society.

[48]  Qibing Pei,et al.  Solution-processed DPP-based small molecule that gives high photovoltaic efficiency with judicious device optimization. , 2013, ACS applied materials & interfaces.

[49]  Barry P Rand,et al.  Effect of Fluorination on the Properties of a Donor–Acceptor Copolymer for Use in Photovoltaic Cells and Transistors , 2013 .

[50]  Andrew C. Stuart,et al.  Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells. , 2013, Journal of the American Chemical Society.

[51]  R. Ziessel,et al.  High-performance solution-processed solar cells and ambipolar behavior in organic field-effect transistors with thienyl-BODIPY scaffoldings. , 2012, Journal of the American Chemical Society.

[52]  Alan J. Heeger,et al.  Solar cell efficiency, self-assembly, and dipole-dipole interactions of isomorphic narrow-band-gap molecules. , 2012, Journal of the American Chemical Society.

[53]  Yongsheng Chen,et al.  Small molecules based on benzo[1,2-b:4,5-b']dithiophene unit for high-performance solution-processed organic solar cells. , 2012, Journal of the American Chemical Society.

[54]  N. Koch,et al.  Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells. , 2012, Journal of the American Chemical Society.

[55]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[56]  Thuc‐Quyen Nguyen,et al.  Non‐Basic High‐Performance Molecules for Solution‐Processed Organic Solar Cells , 2012, Advanced materials.

[57]  Yongfang Li,et al.  Small molecule semiconductors for high-efficiency organic photovoltaics. , 2012, Chemical Society reviews.

[58]  Guo-dan Wei,et al.  Small‐Molecule Photovoltaics Based on Functionalized Squaraine Donor Blends , 2012, Advanced materials.

[59]  Peter Bäuerle,et al.  Small molecule organic semiconductors on the move: promises for future solar energy technology. , 2012, Angewandte Chemie.

[60]  Yongfang Li Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[61]  Yongfang Li,et al.  Narrow band gap D–A copolymer of indacenodithiophene and diketopyrrolopyrrole with deep HOMO level: Synthesis and application in field‐effect transistors and polymer solar cells , 2012 .

[62]  W. You,et al.  Rational Design of High Performance Conjugated Polymers for Organic Solar Cells , 2012 .

[63]  Klaus Meerholz,et al.  Efficient solution-processed bulk heterojunction solar cells by antiparallel supramolecular arrangement of dipolar donor-acceptor dyes. , 2011, Angewandte Chemie.

[64]  Jianguo Tian,et al.  High‐Performance Solar Cells using a Solution‐Processed Small Molecule Containing Benzodithiophene Unit , 2011, Advanced materials.

[65]  J. Fréchet,et al.  Molecular design and ordering effects in π-functional materials for transistor and solar cell applications. , 2011, Journal of the American Chemical Society.

[66]  Yong Cao,et al.  Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells , 2011, Advanced materials.

[67]  Yongfang Li,et al.  Synthesis and Photovoltaic Properties of D–A Copolymers Based on Alkyl-Substituted Indacenodithiophene Donor Unit , 2011 .

[68]  A. Facchetti,et al.  Molecular‐Shape‐Controlled Photovoltaic Performance Probed via Soluble π‐Conjugated Arylacetylenic Semiconductors , 2011, Advanced materials.

[69]  W. Li,et al.  Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells. , 2011, Journal of the American Chemical Society.

[70]  Yongfang Li,et al.  A Solution‐Processable Star‐Shaped Molecule for High‐Performance Organic Solar Cells , 2011, Advanced materials.

[71]  Kai Sun,et al.  Solvent‐Annealed Crystalline Squaraine: PC70BM (1:6) Solar Cells , 2011 .

[72]  Ye Tao,et al.  Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%. , 2011, Journal of the American Chemical Society.

[73]  Thuc-Quyen Nguyen,et al.  Small Molecule Solution-Processed Bulk Heterojunction Solar Cells† , 2011 .

[74]  Chen Li,et al.  Polyphenylene-based materials for organic photovoltaics. , 2010, Chemical reviews.

[75]  A. Zanelli,et al.  Thiophene–Benzothiadiazole Co‐Oligomers: Synthesis, Optoelectronic Properties, Electrical Characterization, and Thin‐Film Patterning , 2010 .

[76]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[77]  O. Inganäs,et al.  Alternating polyfluorenes collect solar light in polymer photovoltaics. , 2009, Accounts of chemical research.

[78]  Thuc-Quyen Nguyen,et al.  Nanoscale Phase Separation and High Photovoltaic Efficiency in Solution‐Processed, Small‐Molecule Bulk Heterojunction Solar Cells , 2009 .

[79]  Fosong Wang,et al.  Monodisperse co-oligomer approach toward nanostructured films with alternating donor-acceptor lamellae. , 2009, Journal of the American Chemical Society.

[80]  Chunchang Zhao,et al.  Derivatives of 4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene-4,9-dione: synthesis and properties. , 2007, The Journal of organic chemistry.

[81]  Gang Li,et al.  “Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes , 2007 .

[82]  Yang Yang,et al.  Synthesis of 5 H ‐ Dithieno [ 3 , 2 ‐ b : 2 ′ , 3 ′ ‐ d ] pyran as an Electron-Rich Building Block for Donor − Acceptor Type Low-Bandgap Polymers , 2013 .

[83]  Yongsheng Chen,et al.  Solution Processable Rhodanine‐Based Small Molecule Organic Photovoltaic Cells with a Power Conversion Efficiency of 6.1% , 2012 .

[84]  Wei Lin Leong,et al.  Solution-processed small-molecule solar cells with 6.7% efficiency. , 2011, Nature materials.