The effect of turbulent flow and surface roughness on biofilm formation in drinking water

There is considerable interest in both Europe and the USA in the effects of microbiological fouling on stainless steels in potable water. However, little is known about the formation and effects of biofilms, on stainless steel in potable water environments, particularly in turbulent flow regimes. Results are presented on the development of biofilms on stainless steel grades 304 and 316 after exposure to potable water at velocities of 0.32, 0.96 and 1.75 m s−1. Cell counts on slides of stainless steel grades 304 and 316 with both 2B (smooth) and 2D (rough) finishes showed viable and total cell counts were higher at the higher flow rates of 0.96 and 1.75 m s−1, compared to a flow rate of 0.32 m s−1. Extracellular polysaccharide levels were not significantly different (P< 0.05) between each flow rate on all stainless steel surfaces studied. higher levels were found at the higher water velocities. the biofilm attached to stainless steel was comprised of a mixed bacterial flora including Acinetobacter sp, Pseudomonas spp, Methylobacterium sp, and Corynebacterium/Arthrobacter spp. Epifluorescence microscopy provided evidence of rod-shaped bacteria and the formation of stands, possibly of extracellular material attached to stainless steel at high flow rates but not at low flow rates.

[1]  J. Costerton,et al.  Microbiology of a northern river: bacterial distribution and relationship to suspended sediment and organic carbon. , 1979, Canadian journal of microbiology.

[2]  E. Geldreich,et al.  A new medium for the enumeration and subculture of bacteria from potable water , 1985, Applied and environmental microbiology.

[3]  Maureen E. Callow,et al.  The structure of Pseudomonas fluorescens biofilms in contact with flowing systems , 1991 .

[4]  I. Beech,et al.  Biofilm Development on 304 and 316 Stainless Steels in a Potable Water System , 1997 .

[5]  M. Dempsey.  Marine bacterial fouling: A scanning electron microscope study , 1981 .

[6]  W. G. Characklis.  Biofilm Development: A Process Analysis , 1984 .

[7]  James D. Bryers,et al.  Early fouling biofilm formation in a turbulent flow system: Overall kinetics , 1981 .

[8]  Hilary M. Lappin-Scott,et al.  Bacterial biofilms and surface fouling , 1989 .

[9]  C. Keevil,et al.  Influence of temperature and plumbing material selection on biofilm formation and growth of Legionella pneumophila in a model potable water system containing complex microbial flora , 1994, Applied and environmental microbiology.

[10]  Karsten Pedersen,et al.  Biofilm development on stainless steel and PVC surfaces in drinking water , 1990 .

[11]  M. Lechevallier,et al.  Enumeration and characterization of standard plate count bacteria in chlorinated and raw water supplies , 1980, Applied and environmental microbiology.

[12]  F. França,et al.  Biofilm formation in water cooling systems , 1996, World journal of microbiology & biotechnology.

[13]  K. Marshall,et al.  Mechanisms of Bacterial Adhesion at Solid-Water Interfaces , 1985 .

[14]  C. A. Kent,et al.  Effect of surface shear stress on the attachment of Pseudomonas fluorescens to stainless steel under defined flow conditions , 1982, Biotechnology and bioengineering.

[15]  B. Olson,et al.  Microbiology of potable water. , 1984, Advances in applied microbiology.

[16]  M. V. van Loosdrecht,et al.  Influence of interfaces on microbial activity. , 1990, Microbiological reviews.

[17]  F. Smith,et al.  COLORIMETRIC METHOD FOR DETER-MINATION OF SUGAR AND RELATED SUBSTANCE , 1956 .

[18]  K. Cooksey,et al.  Biofilms and microbial fouling , 1983 .

[19]  M. Hamilton,et al.  The influence of surface features on bacterial colonization and subsequent substratum chemical changes of 316L stainless steel , 1996 .

[20]  Robert G. J. Edyvean,et al.  BIOFILM DEVELOPMENT ON STAINLESS STEEL IN MAINS WATER , 1998 .

[21]  T. Elliott,et al.  Influence of surface morphology on in vitro bacterial adherence to central venous catheters. , 1994, British journal of anaesthesia.