Multi-scale analysis on the influence of moisture on the mechanical behavior of ferruginous sandstone

Abstract Moisture is known to decrease the mechanical properties of brittle construction materials. The present study focuses on the influence of moisture on the mechanical behavior of ferruginous sandstone in order to understand and quantify this effect. The investigated Diestian and Brusselian ferruginous sandstone have frequently been applied in monumental constructions and many of these monuments presently suffer from material degradation and, in some cases, stability concerns. Experimental analysis is performed on different levels, from micro to macro behavior, in order to obtain a more detailed picture of the acting processes. Therefore, a methodology is proposed which combines established as well as advanced experimental techniques, involving non-destructive testing for pre-classification of the sandstone’s quality, mineralogical analysis and investigation of mechanical properties under dry and saturated conditions. It was observed that the decrease of mechanical properties, such as strength and stiffness, is more pronounced for lower-quality ferruginous sandstone. It was also found that water adsorption by the sandstone during acoustic emission-controlled creep tests shifts the specimen’s behavior from meta-stable creep damage to accelerated failure. These observations were linked to the results of the mineralogical study, in which the consolidation degree and clay content were analyzed and to the results of the microfocus computed tomography which visualized the fracture progress on a micro scale.

[1]  D. Amitrano,et al.  Creep of a porous rock and associated acoustic emission under different hydrous conditions , 2009 .

[2]  Christopher R. Bowen,et al.  Ultrasonic Pulse Velocity Evaluation of Cementitious Materials , 2011 .

[3]  L. Binda,et al.  A Numerical Interpretation Of Long-termBehaviour Of Masonry Materials UnderPersistent Loads , 1970 .

[4]  Luigia Binda.  Learning from Failure: Long-term Behaviour of Heavy Masonry Structures , 2007 .

[5]  Eric N. Landis,et al.  Three-dimensional work of fracture for mortar in compression , 2000 .

[6]  Masayasu Ohtsu,et al.  Acoustic Emission Testing , 2006, Advanced Materials Research.

[7]  Els Verstrynge,et al.  A joint fatigue - creep deterioration model for masonry with acoustic emission based damage assessment , 2013 .

[8]  Tomáš Čejka,et al.  The Effect of Moisture on Significant Mechanical Characteristics of Masonry , 2010 .

[9]  Rossana Bellopede,et al.  Ultrasonic sound test on stone: Comparison of indirect and direct methods under various test conditions , 2006 .

[10]  Resat Ulusay,et al.  Water-induced variations in mechanical properties of clay-bearing rocks , 2009 .

[11]  R. Snellings,et al.  Rietveld refinement strategy for quantitative phase analysis of partially amorphous zeolitized tuffaceous rocks , 2010 .

[12]  E. V. Eeckhout,et al.  The mechanisms of strength reduction due to moisture in coal mine shales , 1976 .

[13]  Jan Środoń,et al.  Quantitative X-ray diffraction analysis of clay-bearing rocks from random preparations , 2001 .

[14]  Martine Wevers,et al.  Listening to the sound of materials: Acoustic emission for the analysis of material behaviour , 1997 .

[15]  Paulo B. Lourenço,et al.  Long term compressive testing of masonry – test procedure and practical experience , 2008 .

[16]  Paulo B. Lourenço,et al.  Prediction of the mechanical properties of granites by ultrasonic pulse velocity and Schmidt hammer hardness , 2007 .

[17]  G. A. Gist.  Fluid effects on velocity and attenuation in sandstones , 1991 .

[18]  M. Dusseault,et al.  Quantifying Rock Capillary Strength Behavior in Unconsolidated Sandstones , 2002 .

[19]  W. Murphy,et al.  Acoustic Velocity and Attenuation in Porous Rocks , 2013 .

[20]  G.P.A.G. van Zijl.  Computational Modelling of Masonry Creep and Shrinkage , 2000 .

[21]  Masuzawa,et al.  Water content and its effect on ultrasound propagation in concrete--the possibility of NDE , 2000, Ultrasonics.

[22]  Luc Schueremans,et al.  Creep and failure prediction of Diestian ferruginous sandstone: Modelling and repair options , 2012 .

[23]  Veerle Cnudde,et al.  High‐resolution X‐ray CT for 3D petrography of ferruginous sandstone for an investigation of building stone decay , 2011, Microscopy research and technique.