Gravity-Induced Progressive Collapse Response of Precast Corner-Supported Modular Buildings

Abstract Compared with conventional buildings, the design of interconnections in multistory modular buildings requires special attention, due to different load distribution mechanisms, level of red...

[1]  Yang Ding,et al.  Monotonic and cyclic response of bolted connections with welded cover plate for modular steel construction , 2018, Engineering Structures.

[2]  Liu Jiadi,et al.  Experimental study on interior connections in modular steel buildings , 2017 .

[3]  Y. S. Chua,et al.  Robustness of Prefabricated Prefinished Volumetric Construction (PPVC) High-rise Building , 2018 .

[4]  Raffaele Landolfo,et al.  Evaluation of seismic dynamic behaviour of drywall partitions, façades and ceilings through shake table testing , 2019, Engineering Structures.

[5]  Bijan Samali,et al.  Automated spatial design of multi-story modular buildings using a unified matrix method , 2017 .

[6]  Zhihua Chen,et al.  Experimental study of an innovative modular steel building connection , 2017 .

[7]  Hamid R. Ronagh,et al.  Numerical models for lateral behaviour analysis of cold-formed steel framed walls: State of the art, evaluation and challenges , 2019, Thin-Walled Structures.

[8]  M. Farajian,et al.  The influence of inter-module connections on the effective length of columns in multi-story modular steel frames , 2020 .

[9]  Fulvio Parisi,et al.  Research and practice on progressive collapse and robustness of building structures in the 21st century , 2018, Engineering Structures.

[10]  Anil K. Chopra,et al.  Dynamics of Structures: Theory and Applications to Earthquake Engineering , 1995 .

[11]  Jeung-Hwan Doh,et al.  Steel Bracket Connection on Modular Buildings , 2017 .

[12]  Feng Fu,et al.  Progressive collapse analysis of high-rise building with 3-D finite element modeling method , 2009 .

[13]  Chris I. Goodier,et al.  Design in Modular Construction , 2014 .

[14]  Kirk A. Marchand,et al.  Alternate Path Method in Progressive Collapse Analysis: Variation of Dynamic and Nonlinear Load Increase Factors , 2012 .

[15]  Bijan Samali,et al.  Prefabricated hybrid steel wall panels for mid-rise construction in seismic regions , 2020 .

[16]  Bijan Samali,et al.  Interlocking system for enhancing the integrity of multi-storey modular buildings , 2018 .

[17]  Zhihua Chen,et al.  Rigidity of corrugated plate sidewalls and its effect on the modular structural design , 2018, Engineering Structures.

[18]  M. Heywood,et al.  Stability of light steel walls in compression with plasterboards on one or both sides , 2020 .

[19]  Gaetano Manfredi,et al.  Seismic performance evaluation of plasterboard partitions via shake table tests , 2014, Bulletin of Earthquake Engineering.

[20]  R. M. Lawson,et al.  Developments of Cold-Formed Steel Sections in Composite Applications for Residential Buildings , 2008 .

[21]  O. A. Pekau,et al.  Progressive collapse simulation of precast panel shear walls during earthquakes , 2006 .

[22]  Hong Hao,et al.  Structural response of modular buildings – An overview , 2018 .

[23]  M. Rashidi,et al.  Natural dynamic characteristics of volumetric steel modules with gypsum sheathed LSF walls: Experimental study , 2021 .

[24]  Pezhman Sharafi,et al.  Anti-collapse resistance mechanisms in corner-supported modular steel buildings , 2020 .

[25]  Yang Ding,et al.  Analytical and numerical studies on steel columns with novel connections in modular construction , 2017 .

[26]  M. P. Byfield,et al.  Robustness of light steel frames and modular construction , 2008 .

[27]  Wensu Chen,et al.  Review of bolted inter-module connections in modular steel buildings , 2019, Journal of Building Engineering.

[28]  Bijan Samali,et al.  Lateral behaviour of hybrid cold-formed and hot-rolled steel wall systems: Experimental investigation , 2018, Journal of Constructional Steel Research.

[29]  Bijan Samali,et al.  Identification of Factors and Decision Analysis of the Level of Modularization in Building Construction , 2018, Journal of Architectural Engineering.

[30]  Simos Gerasimidis,et al.  Global Instability Induced Failure of Tall Steel Moment Frame Buildings , 2017 .

[31]  Bijan Samali,et al.  Collapse capacity of modular steel buildings subject to module loss scenarios: The role of inter-module connections , 2020 .

[32]  Bijan Samali,et al.  Lateral force resisting systems in lightweight steel frames : recent research advances , 2018 .

[33]  Jinkoo Kim,et al.  Progressive collapse-resisting capacity of modular mega-frame buildings , 2013 .