Effect of tetraalkylphosphonium based ionic liquids as lubricants on the tribological performance of a steel-on-steel system

A series of asymmetrical tetraalkylphosphonium ionic liquids were synthesized and evaluated as a new kind of lubricant for the contact of steel/steel using an Optimol SRV oscillating friction and wear tester in ambient condition. The phosphonium ionic liquid shows excellent tribological performance when being used as the lubricating oil, and is superior to the conventional high temperature lubricants X-1P and perfluoropolyether (PFPE) in terms of anti-wear performance and load-carrying capacity. The chemical compositions of the boundary film generated on different contact surfaces were analyzed on a scanning electron microscope with a Kevex energy dispersive X-ray analyzer attachment (SEM/EDS) and X-ray photoelectron spectrometer (XPS). The friction–reduction and anti-wear mechanism of tetraalkylphosphonium as the lubricant were proposed to originate from the active elements P in the tetraalkylphosphonium ionic liquids reacting with the fresh surface to form a reaction film onto specimen surface, an extreme-pressure film with lower shearing strength, which leads to lower friction coefficient, and good wear resistance.

[1]  Peng Wang,et al.  Tribological Performance of Room-Temperature Ionic Liquids as Lubricant , 2002 .

[2]  Feng Zhou,et al.  Tribological properties of plasma nitrided stainless steel against SAE52100 steel under ionic liquid lubrication condition , 2006 .

[3]  C. Kajdas Importance of anionic reactive intermediates for lubricant component reactions with friction surfaces , 1994 .

[4]  M. Jansen,et al.  Research on liquid lubricants for space mechanisms , 2000 .

[5]  K. Manabe Synthesis of novel chiral quaternary phosphonium salts with a multiple hydrogen-bonding site, and their application to asymmetric phase-transfer alkylation , 1998 .

[6]  H. Danjo,et al.  P-Chirogenic phosphonium salts: preparation and use in Rh-catalyzed asymmetric hydrogenation of enamides , 2003 .

[7]  A. Robertson,et al.  Industrial preparation of phosphonium ionic liquids , 2003 .

[8]  N. Karodia,et al.  Phosphonium tosylates as solvents for the Diels–Alder reaction , 2001 .

[9]  Feng Zhou,et al.  Functional Room-temperature Ionic Liquids as Lubricants for an Aluminum-on-Steel System , 2004 .

[10]  Qunji Xue,et al.  Room temperature ionic liquid 1-ethyl-3-hexylimidazolium-bis(trifluoromethylsulfonyl)-imide as lubricant for steel–steel contact , 2004 .

[11]  Zhaojie Cui,et al.  Friction and wear behaviors of ionic liquid of alkylimidazolium hexafluorophosphates as lubricants for steel/steel contact , 2004 .

[12]  P. Kotvis,et al.  The surface and tribological chemistry of chlorine- and sulfur-containing lubricant additives , 2004 .

[13]  J. Zabinski,et al.  Ionic Liquid Lubrication Effects on Ceramics in a Water Environment , 2004 .

[14]  M. Gong,et al.  Polymeric humidity sensor using phosphonium salt-containing polymers , 2002 .

[15]  Laigui Yu,et al.  Room-temperature ionic liquids: a novel versatile lubricant. , 2001, Chemical communications.

[16]  Feng Zhou,et al.  Effect of the functional groups in ionic liquid molecules on the friction and wear behavior of aluminum alloy in lubricated aluminum-on-steel contact , 2005 .

[17]  D. C. Sun,et al.  Tribological behavior of sialon ceramics sliding against steel lubricated by fluorine-containing oils , 2002 .