Fabrication of Ti3Al-Based Intermetallic Alloy by Laser Powder Bed Fusion Using a Powder Mixture

Due to their light weight and outstanding mechanical properties at high temperatures, Ti3Al-based intermetallic alloys have driven increasing interest from both academia and industry; however, when additive manufacturing (AM) is applied to them, the outcome is hardly satisfying. In this work, we report a crack-free Ti3Al-based alloy fabrication by laser powder bed fusion (LPBF) using a mixture of a commercial Ti-48Al-2Cr-2Nb powder and a pure Ti powder. With the aid of a high cooling rate during LPBF, the as-built sample shows a ductile β phase with some partially-melted particles. After the heat treatment, partially-melted particles were dissolved, and the sample showed equiaxed α2 precipitates in the β matrix. The hardness was 515 ± 38 HV in the as-built sample and 475 ± 37 HV in the heat-treated sample. This study shows a novel strategy to fabricate crack-free Ti3Al-based alloy using LPBF from powder blends.

[1]  Xianglong Wang,et al.  Mitigating cracking in laser powder bed fusion of Ti-48Al-2Cr-2Nb via introducing massive β phase , 2022, Materials Characterization.

[2]  A. Huang,et al.  Enhancing high-temperature strength and ductility in laser powder bed fusion Ti–6.5Al–2Zr–1Mo–1V alloy via heat treatment optimization , 2022, Materials Science and Engineering: A.

[3]  Kellen D. Traxel,et al.  Alloy design via additive manufacturing: Advantages, challenges, applications and perspectives , 2022, Materials Today.

[4]  U. Ramamurty,et al.  3D printing of ductile equiatomic Fe-Co alloy for soft magnetic applications , 2021, Additive Manufacturing.

[5]  T. Dzogbewu,et al.  Additive Manufacturing of Ti-Based Intermetallic Alloys: A Review and Conceptualization of a Next-Generation Machine , 2021, Materials.

[6]  J. Moverare,et al.  Thin-wall effects and anisotropic deformation mechanisms of an additively manufactured Ni-based superalloy , 2020 .

[7]  Y. Lin,et al.  Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation , 2020 .

[8]  F. Liou,et al.  A Review on Metallic Alloys Fabrication Using Elemental Powder Blends by Laser Powder Directed Energy Deposition Process , 2020, Materials.

[9]  S. Tor,et al.  Additive manufacturing of NiTi shape memory alloys using pre-mixed powders , 2019, Journal of Materials Processing Technology.

[10]  I. Polozov,et al.  Selective Laser Melting of Ti2AlNb-based intermetallic alloy using elemental powders: Effect of process parameters and post-treatment on microstructure, composition, and properties , 2019, Intermetallics.

[11]  Xiaohong Li,et al.  Effect of Heat Treatment on the Microstructure and Properties of a Ti3Al Linear Friction Welding Joint , 2019, Materials.

[12]  K. Zhou,et al.  Enhanced mechanical properties of Ti-6Al-2Zr-1Mo-1V with ultrafine crystallites and nano-scale twins fabricated by selective laser melting , 2018, Materials Science and Engineering: A.

[13]  W. Zeng,et al.  Effect of boundary on the alpha phase precipitation in a near-alpha titanium alloy , 2018, Materials Letters.

[14]  M. Brochu,et al.  Microstructure and mechanical properties of stainless steel 316L vertical struts manufactured by laser powder bed fusion process , 2018, Materials Science and Engineering: A.

[15]  Yuyong Chen,et al.  Effect of beam current on microstructure, phase, grain characteristic and mechanical properties of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting , 2018, Journal of Alloys and Compounds.

[16]  F. Liou,et al.  Directed energy depositing a new Fe-Cr-Ni alloy with gradually changing composition with elemental powder mixes and particle size’ effect in fabrication process , 2018 .

[17]  Yuyong Chen,et al.  A high-performance β-solidifying TiAl alloy sheet: Multi-type lamellar microstructure and phase transformation , 2018 .

[18]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[19]  Keith Ridgway,et al.  Characterisation of titanium aluminide components manufactured by laser metal deposition , 2018 .

[20]  Vadim Sufiiarov,et al.  In-situ synthesis of Ti2AlNb-based intermetallic alloy by selective laser melting , 2017 .

[21]  K. Zhou,et al.  Effect of α morphology on the diffusional β ↔ α transformation in Ti–55531 during continuous heating: Dissection by dilatometer test, microstructure observation and calculation , 2017 .

[22]  T. B. Britton,et al.  Using transmission Kikuchi diffraction to characterise α variants in an α+β titanium alloy , 2017, Journal of microscopy.

[23]  Wei Li,et al.  Direct laser deposition of Ti-6Al-4V from elemental powder blends , 2016 .

[24]  C. C. Wu,et al.  The effect of annealing on microstructure and tensile properties of Ti-22Al-25Nb electron beam weld joint , 2016 .

[25]  A. Al-Ahmari,et al.  Additive Manufacturing of γ‐TiAl: Processing, Microstructure, and Properties   , 2016 .

[26]  H. Clemens,et al.  Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties , 2016 .

[27]  Zengxi Pan,et al.  The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process , 2016 .

[28]  Stanisław Lipiński,et al.  Structure and properties of the Fe3Al-type intermetallic alloy fabricated by laser engineered net shaping (LENS) , 2016 .

[29]  H. Clemens,et al.  Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase , 2015 .

[30]  E. Brandl,et al.  Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments , 2012 .

[31]  Darin Thomas,et al.  Additive Manufacturing for the Aerospace Industry , 2012 .

[32]  Ryan B. Wicker,et al.  Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science , 2012 .

[33]  Zhigang Zak Fang,et al.  A critical review of mechanical properties of powder metallurgy titanium , 2010 .

[34]  Ryan B. Wicker,et al.  Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting , 2010 .

[35]  A. Otto,et al.  Design of Novel β‐Solidifying TiAl Alloys with Adjustable β/B2‐Phase Fraction and Excellent Hot‐Workability , 2008 .

[36]  Young-Jig Kim,et al.  Modeling of titanium aluminides turbo-charger casting , 2007 .

[37]  M. Palm,et al.  Reassessment of the binary Aluminum-Titanium phase diagram , 2006 .

[38]  S. Malinov,et al.  Crack geometry for basal slip of Ti3Al , 2005 .

[39]  Feng Jicai,et al.  Microstructure evolution of electron beam welded Ti3Al–Nb joint , 2005 .

[40]  H. Fraser,et al.  The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloy , 2003 .

[41]  Ashutosh Kumar Singh,et al.  A study of texture and temperature dependence of mechanical properties in hot rolled Ti–25Al–xNb alloys , 2003 .

[42]  Sarala Djanarthany,et al.  An overview of monolithic titanium aluminides based on Ti3Al and TiAl , 2001 .

[43]  S. Suwas,et al.  Evolution of texture in the β(B2) phase of a two phase titanium aluminide intermetallic alloy Ti-24Al-11Nb , 2000 .

[44]  H. Ding,et al.  Microstructural evolution in superplastic deformation of a Ti3Al alloy , 2000 .

[45]  J. Yang,et al.  Effect of fiber coating on the fatigue crack initiation and multiplication of unnotched SCS-6/Ti3Al composites , 1999 .

[46]  D. Butt,et al.  High-Temperature Oxidation of Ti-48Al-2Nb-2Cr and Ti-25Al-10Nb-3V-1Mo , 1998 .

[47]  R. Reddy,et al.  Microstructure and phase relations in a powder-processed Ti-22AI-12Nb Alloy , 1996 .

[48]  A. Gogia,et al.  Structure, tensile deformation, and fracture of a Ti3Al-Nb alloy , 1990 .

[49]  W. Cho,et al.  Creep behavior of Ti-25Al-10Nb-3V-1Mo , 1990 .

[50]  Samuel M. Allen,et al.  Microstructural development during solidification of stainless steel alloys , 1989 .

[51]  Theodore Kaplan,et al.  Continuous growth model for interface motion during alloy solidification , 1988 .

[52]  M. Kaufman.  Phase Relations in the Ti3Al + Nb System , 1988 .

[53]  Jim Williams,et al.  Phase transformations and modulated microstructures in Ti-Al-Nb alloys , 1988 .

[54]  K. Narasimhan,et al.  An investigation of the ordered DO19 phase formation in the Ti-Al system , 1986 .

[55]  Wei Chen,et al.  Additive manufacturing of titanium aluminides , 2019, Additive Manufacturing for the Aerospace Industry.

[56]  Xueyang Chen.  Fabrication and characterization of advanced materials using laser metal deposition from elemental powder mixture , 2018 .

[57]  K. Hagihara,et al.  Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting , 2017 .

[58]  Hussien Hegab,et al.  Design for additive manufacturing of composite materials and potential alloys: a review , 2016 .