Inductive Frequency Selective Surface: An Application for Dichroic Sub-Reflectors

An Inductive Frequency Selective Surface (IFSS) self-standing dichroic sub-reflector is presented, which allows the transmission of two frequency bands and reflection of a third band. The operating frequency of the sub-reflector is designed to work at Ku, K and Ka frequency bands, intended for earth to space and space to earth satellite communications. The proposed unit cell is a Jerusalem cross intertwined with an Brigid’s cross. The IFSS is investigated using transmission line theory, along with equivalent-circuit model technique. It has been designed, and simulated using CST Microwave Studio and Advance Design Simulator (ADS). The cascade configuration of the IFSS is also investigated to improve frequency roll-off and bandwidth of the reflection and transmission coefficients. The IFSS has been manufactured using two-sided Photo Chemical Machining (PCM) technique, and has been experimentally characterized using an optical configuration, comprising two double ridged horn antennas connected to a VNA and a rotation system. Measured results are in good agreement with theoretical and simulation data, which validates the reliability of the design and manufacturing process.

[1]  Andrea Vallecchi,et al.  A tri-band inductive frequency selective surface sub-reflector for satellite communications systems , 2014, The 8th European Conference on Antennas and Propagation (EuCAP 2014).

[2]  R. Cahill,et al.  Circular polarization frequency selective surface operating in Ku and Ka band , 2014, The 8th European Conference on Antennas and Propagation (EuCAP 2014).

[3]  Andrea Vallecchi,et al.  Analytical model of interwoven spiral arrays , 2014 .

[4]  T. S. Mok,et al.  Curved and plane frequency selective surfaces: a study of two offset subreflectors , 1988 .

[5]  C. Bruno,et al.  Design, manufacturing and testing of a Ku/Ka dichroic subreflector for space communications , 1993 .

[6]  M. Han,et al.  Analysis of cassegrain antenna by using a dichroic sub-reflector , 2013, 2013 IEEE INTERNATIONAL CONFERENCE ON MICROWAVE TECHNOLOGY & COMPUTATIONAL ELECTROMAGNETICS.

[7]  I. Anderson,et al.  On the theory of self-resonant grids , 1975, The Bell System Technical Journal.

[8]  Kai Chang,et al.  Encyclopedia of RF and microwave engineering , 2005 .

[9]  Ben A. Munk,et al.  Frequency Selective Surfaces: Theory and Design , 2000 .

[10]  Yong Zhang,et al.  A Miniaturized Frequency Selective Surface Based on Square Loop Aperture Element , 2014 .

[11]  R. E. Zich,et al.  Design and experimental validations of a new shaped subreflector geometry for EMC oriented Cassegrain system , 2000, Proceedings. Asia-Pacific Conference on Environmental Electromagnetics. CEEM'2000 (IEEE Cat. No.00EX402).

[12]  T. K. Wu,et al.  Double-square-loop FSS for multiplexing four (S/X/Ku/Ka) bands , 1991, Antennas and Propagation Society Symposium 1991 Digest.

[13]  G. Manara,et al.  An Overview of Equivalent Circuit Modeling Techniques of Frequency Selective Surfaces and Metasurfaces , 2014 .

[14]  Antonio Luiz P. S. Campos,et al.  Synthesis of frequency selective surfaces using genetic algorithm combined with the equivalent circuit method , 2012 .

[15]  L. C. Kretly,et al.  An efficient method based on equivalent-circuit modeling for analysis of Frequency Selective Surfaces , 2013, 2013 SBMO/IEEE MTT-S International Microwave & Optoelectronics Conference (IMOC).

[16]  Chinmoy Saha,et al.  Design of double layers dichroic subreflector for S and X band Cassegrain antenna , 2016, 2016 IEEE Indian Antenna Week (IAW 2016).

[17]  Richard Langley,et al.  Equivalent-circuit models for frequency-selective surfaces at oblique angles of incidence , 1985 .

[18]  P. Ingvarson,et al.  A dichroic subreflector for a communication satellite , 1989, Digest on Antennas and Propagation Society International Symposium.

[20]  Masataka Ohira,et al.  Analysis of frequency selective surface with arbitrarily shaped element by equivalent circuit model , 2005 .