A literature review on modeling and control design for electrostatic microactuators with fringing and squeezed film damping effects

A literature review concerning the modeling and control design aspects of electrostatic micro-actuators is presented in this article. The modeling issues of electrostatic micro actuators with fringing and squeezed film damping effects are presented followed by control strategies that have already been applied in such systems. As a special use, the analytic model and suboptimal robust control of a micro Cantilever Beam (μCB) with fringing and squeezed thin film damping effects is presented. The suspended clamped-free μCB can move via the application of an external electrically induced force. The nonlinear model of the μCB is linearized in multiple operating points with respect to the beam's tip-end displacement. A robust H∞-controller relying on the LMI-theory is designed for the set of the resulting multiple operating models. Particular attention is paid in order to examine the stability issue within the intervals of the operating points. Simulation results investigate the efficacy of the suggested modeling and control techniques.

[1]  Minhang Bao,et al.  Squeeze film air damping in MEMS , 2007 .

[2]  G. Fedder,et al.  Position control of parallel-plate microactuators for probe-based data storage , 2004, Journal of Microelectromechanical Systems.

[3]  H. Riedel,et al.  Capacitive silicon accelerometer with highly symmetrical design , 1990 .

[4]  Qing Jiang,et al.  Characterization of the squeeze film damping effect on the quality factor of a microbeam resonator , 2004 .

[5]  Anthony Tzes,et al.  Modeling and Gain Scheduling Design for an Electrostatic Micro-Actuator with Squeezed Film Damping Effects , 2009 .

[6]  Steven Brebels,et al.  An electrostatic fringing-field actuator (EFFA): application towards a low-complexity thin-film RF-MEMS technology , 2007 .

[7]  Anthony Tzes,et al.  Modeling aspects and gain scheduled H∞controller design for an electrostatic micro-actuator with squeezed gas film damping effects , 2009, 2009 American Control Conference.

[8]  Bernhard E. Boser,et al.  Charge control of parallel-plate, electrostatic actuators and the tip-in instability , 2003 .

[9]  J. Fluitman,et al.  Electrostatic curved electrode actuators , 1995 .

[10]  Cheng-Ching Yu,et al.  Nonlinear process control using multiple models : Relay feedback approach , 2000 .

[11]  Kumpati S. Narendra,et al.  Adaptation and learning using multiple models, switching, and tuning , 1995 .

[12]  Anthony Tzes,et al.  Intelligent Robust Controller Design for a Micro-actuator , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[13]  W. Miller,et al.  A closed-form model for the pull-in voltage of electrostatically actuated cantilever beams , 2005 .

[14]  F.L. Lewis,et al.  Solving the "Pull-in" Instability Problem of Electrostatic Microactuators using Nonlinear Control Techniques , 2007, 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[15]  Stephen P. Boyd,et al.  Linear Matrix Inequalities in Systems and Control Theory , 1994 .

[16]  J. B. Starr Squeeze-film damping in solid-state accelerometers , 1990, IEEE 4th Technical Digest on Solid-State Sensor and Actuator Workshop.

[17]  Pu Li and Yuming Fang,et al.  A New Free Molecular Model for Squeeze-Film Damping of Flexible Microbeam in Low Vacuum , 2009 .

[18]  Ali H. Nayfeh,et al.  A reduced-order model for electrically actuated microbeam-based MEMS , 2003 .

[19]  Jordan M. Berg,et al.  Control of an Electrostatic Microelectromechanical System Using Static and Dynamic Output Feedback , 2005 .

[20]  Rudra Pratap,et al.  Effect of flexural modes on squeeze film damping in MEMS cantilever resonators , 2007 .

[21]  Jacob K. White,et al.  A computer-aided design system for microelectromechanical systems (MEMCAD) , 1992 .

[22]  Robert Puers,et al.  Pull-in voltage analysis of electrostatically actuated beam structures with fixed–fixed and fixed–free end conditions , 2002 .

[23]  Yuancheng Sun,et al.  Modified Reynolds' equation and analytical analysis of squeeze-film air damping of perforated structures , 2003 .

[24]  Michael Kraft,et al.  Analysis of the dynamic behaviour of a torsional micro-mirror , 2006 .

[25]  R. Braatz,et al.  A tutorial on linear and bilinear matrix inequalities , 2000 .

[26]  R.F. Wolffenbuttel,et al.  Using dynamic voltage drive in a parallel-plate electrostatic actuator for full-gap travel range and positioning , 2006, Journal of Microelectromechanical Systems.

[27]  Anthony Tzes,et al.  Robust PID Controller Design for a micro-Actuator with Squeezed Gas Film Damping Effects , 2008 .

[28]  M. K. Andrews,et al.  A comparison of squeeze-film theory with measurements on a microstructure , 1993 .

[29]  Jin Cheng,et al.  Analytical and finite element model pull-in study of rigid and deformable electrostatic microactuators , 2004 .

[30]  Pu Li,et al.  A new model for squeeze-film damping of electrically actuated microbeams under the effect of a static deflection , 2007 .

[31]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[32]  Subrahmanyam Gorthi,et al.  Cantilever beam electrostatic MEMS actuators beyond pull-in , 2006 .

[33]  P. Gahinet,et al.  A linear matrix inequality approach to H∞ control , 1994 .

[34]  T. Veijola,et al.  Equivalent-circuit model of the squeezed gas film in a silicon accelerometer , 1995 .

[35]  K. Pister,et al.  Dynamics Of Polysilicon Parallel-plate Electrostatic Actuators , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[36]  W. E. Langlois Isothermal squeeze films , 1961 .

[37]  Hartono Sumali,et al.  Squeeze-film damping in the free molecular regime: model validation and measurement on a MEMS , 2007 .

[38]  S. Senturia,et al.  Computer-aided generation of nonlinear reduced-order dynamic macromodels. II. Stress-stiffened case , 2000, Journal of Microelectromechanical Systems.

[39]  Pascal Gahinet,et al.  Explicit controller formulas for LMI-based H∞ synthesis , 1996, Autom..

[40]  R. Dutton,et al.  Characterization of contact electromechanics through capacitance-voltage measurements and simulations , 1999 .

[41]  J. J. Blech On Isothermal Squeeze Films , 1983 .

[42]  R. Fung,et al.  A new modified Reynolds equation for ultrathin film gas lubrication , 1996 .

[43]  S. Eshelman,et al.  Micromachined low-loss microwave switches , 1999 .

[44]  R. Puers,et al.  Electrostatic forces and their effects on capacitive mechanical sensors , 1996 .

[45]  Amit Lal,et al.  The squeeze film damping effect of perforated microscanners: modeling and characterization , 2006 .

[46]  Squeeze film effects on dynamic performance of MEMS μ-mirrors-consideration of gas rarefaction and surface roughness , 2008 .

[47]  S. D. Senturia,et al.  Generating efficient dynamical models for microelectromechanical systems from a few finite-element simulation runs , 1999 .

[48]  M. Vagia,et al.  Robust PID-control design for an electrostatic micromechanical? actuator with structured uncertainty , 2007, 2007 Mediterranean Conference on Control & Automation.

[49]  Pei-Zen Chang,et al.  A low actuation voltage electrostatic actuator for RF MEMS switch applications , 2007 .

[50]  Peter M. Osterberg,et al.  Electrostatically actuated microelectromechanical test structures for material property measurement , 1995 .

[51]  S.D. Senturia,et al.  Computer-aided generation of nonlinear reduced-order dynamic macromodels. I. Non-stress-stiffened case , 2000, Journal of Microelectromechanical Systems.

[52]  M. Younis,et al.  A new approach to the modeling and simulation of flexible microstructures under the effect of squeeze-film damping , 2004 .

[53]  T. Naik,et al.  Dynamic response of a cantilever in liquid near a solid wall , 2003 .

[54]  Davide Spinello,et al.  Capacitance estimate for electrostatically actuated narrow microbeams , 2006 .

[55]  Robert B. Darling,et al.  Compact analytical modeling of squeeze film damping with arbitrary venting conditions using a Green's function approach , 1998 .