Co2 Emissions Reduction of Photovoltaic Thermal Model Using Variable Flow Rate Values

In this paper, Co2 emission reduction of Photovoltaic Thermal (PVT) model using variable flow rate values has been examined and evaluated for seventy-three different Photovoltaic (PV) coverage area cases of PVT (between 20% to 80%). A data set of weather conditions of a city in Canada over one year is used for this study. Co2 emission reduction is investigated for each month for the different cases in this work. For minimizing Co2 emissions, the percentage of PV coverage area values for each month is determined. To maximize the annual Co2 emission reduction, specific PV coverage area values are carefully chosen for each month using variable flow rate. Results show that the annual Co2 emission reduction can be maximized by using adapted (dynamic) PV coverage area values compared to the conventional (static) PV coverage area values of the PVT system during a year. The fitted-curve function is obtained which evaluates the Co2 emissions reduction for each month at different PV coverage area ratio.

[1]  Shintaro Yokoyama,et al.  Field experiments and analyses on a hybrid solar collector , 2003 .

[2]  Ji Jie,et al.  A numerical and experimental study on a heat pipe PV/T system , 2011 .

[3]  Anil Kumar,et al.  Historical and recent development of photovoltaic thermal (PVT) technologies , 2015 .

[4]  Niccolò Aste,et al.  Water flat plate PV–thermal collectors: A review , 2014 .

[5]  J. I. Rosell,et al.  Hybrid photovoltaic–thermal solar collectors dynamic modeling , 2013 .

[6]  E. C. Kern,et al.  Combined photovoltaic and thermal hybrid collector systems , 1978 .

[7]  Qiang Yao,et al.  Outdoor performance of a low-concentrated photovoltaic–thermal hybrid system with crystalline silicon solar cells , 2013 .

[8]  Mahmoud Abdelhamid,et al.  Evaluation of On-Board Photovoltaic Modules Options for Electric Vehicles , 2014, IEEE Journal of Photovoltaics.

[9]  J. Coventry Performance of a concentrating photovoltaic/thermal solar collector , 2005 .

[10]  Lun Jiang,et al.  Design, simulation and experimental characterization of a novel parabolic trough hybrid solar photovoltaic/thermal (PV/T) collector , 2017 .

[11]  H. Zondag,et al.  PV thermal systems: PV panels supplying renewable electricity and heat , 2004 .

[12]  Shadi H. Shehadeh,et al.  Minimizing CO2 emissions of Photovoltaic Thermal model in North America , 2017, 2017 IEEE 30th Canadian Conference on Electrical and Computer Engineering (CCECE).

[13]  Tin-Tai Chow,et al.  Performance analysis of photovoltaic-thermal collector by explicit dynamic model , 2003 .

[14]  G. N. Tiwari,et al.  Evaluation of Carbon Credits Earned by a Solar Energy Park in Indian Conditions , 2008 .

[15]  Niccolò Aste,et al.  Design, development and performance monitoring of a photovoltaic-thermal (PVT) air collector , 2008 .

[16]  G. Tiwari,et al.  Overall energy, exergy and carbon credit analysis of N partially covered Photovoltaic Thermal (PVT) concentrating collector connected in series , 2016 .

[17]  Kamaruzzaman Sopian,et al.  An overview of photovoltaic thermal combination (PV/T combi) technology , 2014 .

[18]  Oussama Rejeb,et al.  A numerical investigation of a photovoltaic thermal (PV/T) collector , 2015 .

[19]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[20]  T. C. Kandpal,et al.  Carbon abatement potential of solar home systems in India and their cost reduction due to carbon finance , 2009 .

[21]  S. Iniyan,et al.  Flat plate solar photovoltaic–thermal (PV/T) systems : A reference guide , 2015 .

[22]  Georgios Kokogiannakis,et al.  Thermal management systems for Photovoltaics (PV) installations: A critical review , 2013 .

[23]  Karima E. Amori,et al.  Field study of various air based photovoltaic/thermal hybrid solar collectors , 2014 .