Accelerated Life Test of High Brightness Light Emitting Diodes

Short-term accelerated life test activity on high brightness light emitting diodes is reported. Two families of 1-W light-emitting diodes (LEDs) from different manufacturers were submitted to distinct stress conditions: high temperature storage without bias and high dc current test. During aging, degradation mechanisms like light output decay and electrical property worsening were detected. In particular, the degradation in light efficiency induced by thermal storage was found to follow an exponential law, and the activation energy of the process was extrapolated. Aged devices exhibited a modification of the package epoxy color from white to brown. The instability of the package contributes to the overall degradation in terms of optical and spectral properties. In addition, an increase in thermal resistance was detected on one family of LEDs. This increase induces higher junction temperature levels during operative conditions. In order to correlate the degradation mechanisms and kinetics found during thermal stress, a high dc current stress was performed. Results from this comparative analysis showed similar behavior, implying that the degradation process of dc current aged devices is thermal activated due to high temperatures reached by the junction during stress. Finally, the different effects of the stress on two families of LEDs were taken into account in order to identify the impact of aging on device structure.

[1]  V. Székely,et al.  Fine structure of heat flow path in semiconductor devices: a measurement and identification method , 1988 .

[2]  M. Osiński,et al.  Single-quantum well InGaN green light emitting diode degradation under high electrical stress , 1999 .

[3]  G. Scamarcio,et al.  Degradation mechanisms of GaN-based LEDs after accelerated DC current aging , 2002, Digest. International Electron Devices Meeting,.

[4]  E. Schubert,et al.  Junction–temperature measurement in GaN ultraviolet light-emitting diodes using diode forward voltage method , 2004 .

[5]  Jean Paul Freyssinier,et al.  Solid-state lighting: failure analysis of white LEDs , 2004 .

[6]  G. Farkas,et al.  Thermal investigation of high power Optical Devices by transient testing , 2005, IEEE Transactions on Components and Packaging Technologies.

[7]  Ruggero Pintus,et al.  High brightness GaN LEDs degradation during dc and pulsed stress , 2006, Microelectron. Reliab..

[8]  S. H. Teoh,et al.  Sixty Thousand Hour Light Output Reliability of AlGaInP Light Emitting Diodes , 2006, IEEE Transactions on Device and Materials Reliability.

[9]  U. Zehnder,et al.  High-Temperature Degradation of GaN LEDs Related to Passivation , 2006, IEEE Transactions on Electron Devices.

[10]  Lianqiao Yang,et al.  Mechanism and thermal effect of delamination in light-emitting diode packages , 2005, Microelectron. J..

[11]  M. Craford,et al.  Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting , 2007, Journal of Display Technology.

[12]  U. Zehnder,et al.  Reversible Degradation of Ohmic Contacts on p-GaN for Application in High-Brightness LEDs , 2007, IEEE Transactions on Electron Devices.

[13]  Zheng Zhiqiang Lifetime Estimation of High-Power White LEDs , 2009 .