Low power 8-GHz ultra-wideband active balun

A new low-power CMOS active balun is designed for ultra-wideband applications, using a pair of common-source NMOS and common-gate PMOS transistors. This balun gives an impedance transformation ratio of 1:2. Without compensation feedback, the circuit provides a differential signal within 2dB and 3deg of gain and phase imbalance, respectively, up to 8-GHz. Total power consumption is only 1.44 mW at the supply voltage of Vdd=1.2V, much less than 12 mW of the traditional active balun. This saves 88% of power. The circuit can be fully integrated in RFIC for low power and low cost

[1]  Fujiang Lin,et al.  Novel active differential phase splitters in RFIC for wireless applications , 1998, RFIC 1998.

[2]  J. Shibata,et al.  A high performance GaAs MMIC upconverter with an automatic gain control amplifier , 1997, GaAs IC Symposium. IEEE Gallium Arsenide Integrated Circuit Symposium. 19th Annual Technical Digest 1997.

[3]  Kiat Seng Yeo,et al.  Design of a phase splitter for 3/sup rd/ ISM band , 2003, 2003 IEEE Conference on Electron Devices and Solid-State Circuits (IEEE Cat. No.03TH8668).

[4]  Kazuki Tateoka,et al.  A GaAs single balanced mixer MMIC with built-in active balun for personal communication systems , 1995, IEEE 1995 Microwave and Millimeter-Wave. Monolithic Circuits Symposium. Digest of Papers.

[5]  Yongnan Xuan,et al.  Computer-aided design of microwave frequency doublers using a new circuit structure , 1993 .

[6]  A. Platzker,et al.  A novel MMIC biphase modulator with variable gain using enhancement-mode FETS suitable for 3 V wireless applications , 1994, Proceedings of 1994 IEEE Microwave and Millimeter-Wave Monolithic Circuits Symposium.

[7]  B. J. Buck,et al.  A 2.4 GHz single chip transceiver , 1993, IEEE 1993 Microwave and Millimeter-Wave Monolithic Circuits Symposium Digest of Papers.