Simulating fracture propagation in rock and concrete by an augmented virtual internal bond method

This paper develops a practical approach to simulating fracture propagation in rock and concrete based on an augmented virtual internal bond (VIB) method in which the cohesion of solid is modeled as material particles interconnected by a network of randomized virtual micro bonds described by the Xu– Needleman potential. The micro bond potential is used to derive macroscale constitutive relations via the Cauchy–Born rule. By incorporating different energy contributions due to stretch and shearing, as well as different energy levels under tension and compression of each micro bond, the derived macro constitutive laws are particularly useful for modeling quasi-brittle materials such as rock and concrete which usually have different Poisson ratios and much higher compressive strength than tensile strength. The mesh-size sensitivity associated with strain-softening in the present constitutive model is addressed by adjusting material constants near the crack tip so that the J-integral is kept equal to the intrinsic fracture energy of the material. Numerical examples demonstrate that the proposed VIB method is capable of simulating mixed mode fracture propagation in rock and concrete with results in consistency with relevant experimental observations. Copyright 2011 John Wiley & Sons, Ltd.

[1]  W. M. Rainforth,et al.  The effects of notch width on the SENB toughness for oxide ceramics , 1992 .

[2]  René de Borst,et al.  Some recent issues in computational failure mechanics , 2001 .

[3]  Xiaopeng Xu,et al.  Void nucleation by inclusion debonding in a crystal matrix , 1993 .

[4]  Zdenek P. Bazant,et al.  Rock fracture via strain-softening finite elements , 1984 .

[5]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[6]  Herbert H. Einstein,et al.  Coalescence of fractures under shear stresses in experiments , 1995 .

[7]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[8]  Zhennan Zhang,et al.  Simulation of fracture propagation subjected to compressive and shear stress field using virtual multidimensional internal bonds , 2009 .

[9]  E. Z. Lajtai.  Brittle fracture in compression , 1974 .

[10]  Louis Ngai Yuen Wong,et al.  Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression , 2009 .

[11]  Huajian Gao,et al.  On the Modified Virtual Internal Bond Method , 2005 .

[12]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[13]  Rena C. Yu,et al.  A comparative study between discrete and continuum models to simulate concrete fracture , 2008 .

[14]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[15]  R. Borst.  Fracture in quasi-brittle materials: a review of continuum damage-based approaches , 2002 .

[16]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[17]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[18]  Huajian Gao,et al.  Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds , 1998 .

[19]  D. V. Griffiths,et al.  Modelling of elastic continua using a grillage of structural elements based on discrete element concepts , 2001 .

[20]  Huajian Gao,et al.  Hyperelasticity governs dynamic fracture at a critical length scale , 2003, Nature.

[21]  Zenon Mróz,et al.  Finite element analysis of deformation of strain‐softening materials , 1981 .

[22]  J. Tersoff,et al.  New empirical approach for the structure and energy of covalent systems. , 1988, Physical review. B, Condensed matter.

[23]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[24]  Jaime Planas,et al.  Mixed Mode Fracture of Concrete under Proportional and Nonproportional Loading , 1998 .

[25]  F. Milstein.  Theoretical elastic behaviour of crystals at large strains , 1980 .

[26]  Ching S. Chang,et al.  Fracture modeling using a micro-structural mechanics approach––I. Theory and formulation , 2002 .

[27]  Konstantin Y. Volokh,et al.  Hyperelasticity with softening for modeling materials failure , 2007 .

[28]  Konstantin Y. Volokh,et al.  Fracture toughness from the standpoint of softening hyperelasticity , 2008 .

[29]  F. G. Emmerich.  Tensile strength and fracture toughness of brittle materials , 2007 .

[30]  Baohua Ji,et al.  Modeling fracture in nanomaterials via a virtual internal bond method , 2003 .

[31]  Yasuaki Ichikawa,et al.  Deformation and fracturing behaviour of discontinuous rock mass and damage mechanics theory , 1988 .

[32]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[33]  M. Ortiz,et al.  Quasicontinuum analysis of defects in solids , 1996 .

[34]  Huajian Gao,et al.  Crack nucleation and growth as strain localization in a virtual-bond continuum , 1998 .

[35]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[36]  Ge Xiurun,et al.  Micromechanical modelling of elastic continuum with virtual multi‐dimensional internal bonds , 2006 .

[37]  Huajian Gao,et al.  A theory of local limiting speed in dynamic fracture , 1996 .

[38]  Jan Cervenka,et al.  Equivalent localization element for crack band approach to mesh‐sensitivity in microplane model , 2005 .

[39]  Xiurun Ge,et al.  A new quasi-continuum constitutive model for crack growth in an isotropic solid , 2005 .

[40]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[41]  R. Borst.  Smeared cracking, plasticity, creep, and thermal loading—A unified approach , 1987 .