Experimental Study of Sliding Hydromagnetic Isolators for Seismic Protection

AbstractSliding isolation, as one of the modalities of base isolation, has demonstrated its value in seismic hazard mitigation. Conventional sliding isolation systems, however, may exhibit unaccept...

[1]  Yongbo Peng,et al.  Performance evaluation of base‐isolated structures with sliding hydromagnetic bearings , 2018, Structural Control and Health Monitoring.

[2]  Faramarz Gordaninejad,et al.  Performance of a new magnetorheological elastomer isolation system , 2014 .

[3]  Gilberto Mosqueda,et al.  Experimental simulation of base‐isolated buildings pounding against moat wall and effects on superstructure response , 2012 .

[4]  Gang Wu,et al.  Effect of mechanical degradation of laminated elastomeric bearings and shear keys upon seismic behaviors of small-to-medium-span highway bridges in transverse direction , 2018, Earthquake Engineering and Engineering Vibration.

[5]  Robert G. Drysdale,et al.  Shake table study on an ordinary low‐rise building seismically isolated with SU‐FREIs (stable unbonded‐fiber reinforced elastomeric isolators) , 2009 .

[6]  Yongbo Peng,et al.  Nonlinear stochastic optimal control strategy of hysteretic structures , 2011 .

[7]  Jeong-Hoi Koo,et al.  Seismic performance evaluation of an MR elastomer-based smart base isolation system using real-time hybrid simulation , 2013 .

[8]  Chung Bang Yun,et al.  Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior , 2007 .

[9]  Michelangelo Laterza,et al.  Field testing of low-rise base isolated building , 2004 .

[10]  George W. Housner,et al.  Performance of the base-isolated USC University Hospital under the 1994 Northridge earthquake , 1994 .

[11]  Mohammed Ismail,et al.  An isolation system for limited seismic gaps in near‐fault zones , 2015 .

[12]  Gursel Alici,et al.  A novel magnetorheological elastomer isolator with negative changing stiffness for vibration reduction , 2014 .

[13]  Ivo Dolezel,et al.  Optimized regime of induction heating of a disk before its pressing on shaft , 2001 .

[14]  Gangbing Song,et al.  Passive base isolation with superelastic nitinol SMA helical springs , 2014 .

[15]  Michael C. Constantinou,et al.  Spherical sliding isolation bearings with adaptive behavior: Experimental verification , 2008 .

[16]  Jinping Ou,et al.  Experimental and analytical study on pounding reduction of base‐isolated highway bridges using MR dampers , 2009 .

[17]  Roberto Villaverde,et al.  Base isolation with sliding hydromagnetic bearings: concept and feasibility study , 2017 .

[18]  Paolo Castaldo,et al.  Seismic reliability of base-isolated structures with friction pendulum bearings , 2015 .

[19]  Tianjian Ji,et al.  Seismic protection technology for nuclear power plants: a systematic review , 2015 .

[20]  Bijan Samali,et al.  Development and characterization of a magnetorheological elastomer based adaptive seismic isolator , 2013, Smart Materials and Structures.

[21]  Stefan Hurlebaus,et al.  Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation system , 2010 .

[22]  Hyung-Jo Jung,et al.  Vibration mitigation of highway isolated bridge using MR damper-based smart passive control system employing an electromagnetic induction part , 2009 .

[23]  Stefan Hurlebaus,et al.  Evaluation of the performance of a sliding-type base isolation system with a NiTi shape memory alloy device considering temperature effects , 2010 .

[24]  Weiqing Liu,et al.  Stochastic Seismic Response and Reliability Analysis of Base-Isolated Structures , 2007 .

[25]  Michael C. Constantinou,et al.  Spherical sliding isolation bearings with adaptive behavior: Theory , 2008 .

[26]  Yu Bao,et al.  Failure of double friction pendulum bearings under pulse‐type motions , 2017 .

[27]  Donatello Cardone,et al.  Seismic isolation of bridges using isolation systems based on flat sliding bearings , 2007 .