Compact Design of Planar Stepped Micro Combustor for Portable Thermoelectric Power Generation

Abstract An efficient prototype of a micro power generator with integrated micro combustor has been developed in the present study. The proposed design of the integrated micro-combustor provides high surface temperature with superior temperature uniformity and enhanced flame stability limits, a prerequisite for a thermoelectric power generation system. This novel micro combustor configuration consists of three backward facing steps with a recirculation hole fabricated in a rectangular heating medium of aluminium material. Parametric studies are carried out by varying the mixture inlet velocity, equivalence ratio and coolant flow rate to obtain the optimized operating conditions for maximum power generation. Two thermoelectric modules are mounted on the system operating with liquefied petroleum gas as fuel. A maximum conversion efficiency of 3.3% is obtained at ϕ = 0.95 with a mixture velocity of 7.5 m/s and a load resistance of 4 Ω across the thermoelectric generator. The effect of porous media is investigated to enhance the flame stability limits in the micro combustor. Porous media significantly enhances the upper flame stability limits and maximum conversion efficiencies (3.8%, 4.03%, and 3.73% at ϕ = 1, 0.9 and 0.8 at 10 m/s). A significantly higher power density (∼50% higher than existing systems) of 0.12 mW/mm 3 of system volume is achieved. A compact design of the prototype system with high conversion efficiency shows the possibility of its application for various systems requiring portable power for remote, stand-alone, military and aerospace applications.

[1]  K. Qiu,et al.  Development of a novel cascading TPV and TE power generation system , 2012 .

[2]  Daiqing Zhao,et al.  Experimental study of a plat-flame micro combustor burning DME for thermoelectric power generation , 2011 .

[3]  A. Fan,et al.  A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium , 2016 .

[4]  Shambhoo Yadav,et al.  Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor , 2015 .

[5]  Zhaoli Guo,et al.  Fundamental flame characteristics of premixed H2–air combustion in a planar porous micro-combustor , 2016 .

[6]  Wei-Hsin Chen,et al.  Experimental study on thermoelectric modules for power generation at various operating conditions , 2012 .

[7]  Li Zhang,et al.  Numerical investigation on the combustion characteristics of methane/air in a micro-combustor with a hollow hemispherical bluff body , 2015 .

[8]  Wenming Yang,et al.  Experimental study of micro-thermophotovoltaic systems with different combustor configurations , 2007 .

[9]  D. Rowe,et al.  Modelling heat exchangers for thermoelectric generators , 2001 .

[10]  Oh Chae Kwon,et al.  Thermophotovoltaic power conversion from a heat-recirculating micro-emitter , 2012 .

[11]  Sudarshan Kumar,et al.  Numerical investigations of unsteady flame propagation in stepped microtubes , 2015 .

[12]  R. Marsh,et al.  Development and investigation of a non-catalytic self-aspirating meso-scale premixed burner integrated thermoelectric power generator , 2016 .

[13]  R. Yetter,et al.  Development of a microreactor as a thermal source for microelectromechanical systems power generation , 2002 .

[14]  Junjie Chen,et al.  Optimal combustor dimensions for the catalytic combustion of methane-air mixtures in micro-channels , 2017 .

[15]  Sudarshan Kumar,et al.  Effect of Wall Thermal Boundary Conditions on Flame Dynamics of CH4-Air and H2-Air Mixtures in Straight Microtubes , 2017 .

[16]  Derek Dunn-Rankin,et al.  Enhancing thermal, electrical efficiencies of a miniature combustion‐driven thermophotovoltaic system , 2009 .

[17]  A. Fan,et al.  Experimental investigation on non-premixed methane/air combustion in Y-shaped meso-scale combustors with/without fibrous porous media , 2017 .

[18]  R. Matsumoto,et al.  Development of a small-scale power system with meso-scale vortex combustor and thermo-electric device , 2015 .

[19]  Oh Chae Kwon,et al.  Performance of a micro-thermophotovoltaic power system using an ammonia-hydrogen blend-fueled micro-emitter , 2013 .

[20]  C. Shu,et al.  A prototype microthermophotovoltaic power generator , 2004 .

[21]  Zongping Shao,et al.  A Thermally Self-Sustaining Miniature Solid Oxide Fuel Cell , 2004 .

[22]  Wenming Yang,et al.  Combustion in micro-cylindrical combustors with and without a backward facing step , 2002 .

[23]  Sudarshan Kumar,et al.  Thermal performance of a micro combustor with heat recirculation , 2013 .

[24]  A. Agrawal,et al.  Heat-Recirculating Combustor Using Porous Inert Media for Mesoscale Applications , 2006 .

[25]  Y. Chao,et al.  OPERATIONAL CHARACTERISTICS OF CATALYTIC COMBUSTION IN A PLATINUM MICROTUBE , 2004 .

[26]  Sung Hyun Kim,et al.  Novel micro fuel processor for PEMFCs with heat generation by catalytic combustion , 2005 .

[27]  Sudarshan Kumar,et al.  On the formation of spinning flames and combustion completeness for premixed fuel–air mixtures in stepped tube microcombustors , 2013 .

[28]  C. Shu,et al.  Development of microthermophotovoltaic system , 2002 .

[29]  S. Minaev,et al.  Characteristics of Microscale Combustion in a Narrow Heated Channel , 2004 .

[30]  Zixue Luo,et al.  Numerical investigation of a novel micro combustor with double-cavity for micro-thermophotovoltaic system , 2015 .

[31]  Derek Dunn-Rankin,et al.  Personal power systems , 2005 .

[32]  S. Wongwises,et al.  Power generation enhancement with hybrid thermoelectric generator using biomass waste heat energy , 2017 .

[33]  Xiaohuan Zhao,et al.  Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor , 2016 .

[34]  Wenming Yang,et al.  Development of micro-thermophotovoltaic power generator with heat recuperation , 2014 .

[35]  A. Carlos Fernandez-Pello,et al.  Micropower generation using combustion: Issues and approaches , 2002 .

[36]  Zhaoli Guo,et al.  Numerical study on heat recirculation in a porous micro-combustor , 2016 .

[37]  Bhupendra Khandelwal,et al.  Experimental studies on flame stabilization in a three step rearward facing configuration based micro channel combustor , 2013 .

[38]  David C. Walther,et al.  Advances and challenges in the development of power-generation systems at small scales , 2011 .

[39]  K. Maruta,et al.  Microscale combustion: Technology development and fundamental research , 2011 .

[40]  Bhupendra Khandelwal,et al.  Investigations into the flame stability limits in a backward step micro scale combustor with premixed methane–air mixtures , 2010 .

[41]  L. Merotto,et al.  Study of a thermoelectric generator based on a catalytic premixed meso-scale combustor , 2016 .

[42]  M. Esashi,et al.  High-energy density miniature thermoelectric generator using catalytic combustion , 2006, Journal of Microelectromechanical Systems.

[43]  Sudarshan Kumar,et al.  Investigations on flame dynamics of premixed H2–air mixtures in microscale tubes , 2016 .

[44]  Oh Chae Kwon,et al.  Stability limits of premixed microflames at elevated temperatures , 2006 .

[45]  Wei Chen,et al.  Combustion and direct energy conversion inside a micro-combustor , 2016 .

[46]  Shambhoo Yadav,et al.  A prototype micro-thermoelectric power generator for micro-electromechanical systems , 2014 .

[47]  Niket S. Kaisare,et al.  A review on microcombustion: Fundamentals, devices and applications , 2012 .

[48]  Wenming Yang,et al.  Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application , 2015 .

[49]  Vigor Yang,et al.  Development of meso and micro scale liquid propellant thrusters , 2003 .

[50]  Wenming Yang,et al.  Porous media combustion for micro thermophotovoltaic system applications , 2010 .