论文信息 - An investigation towards developing capability profiles of rapid prototyping technologies with a focus on 3D-printing - 字舞流文

An investigation towards developing capability profiles of rapid prototyping technologies with a focus on 3D-printing

Neal De Beer | N. D. Beer

[1] Andrea Gatto,et al. Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish , 1995 .

[2] Albert W.L. Yao,et al. A robust process optimization for a powder type rapid prototyper , 2002 .

[3] Gideon Levy,et al. RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .

[4] ADVANCES IN SELECTIVE LASER SINTERING , 2003 .

[5] Jean-Pierre Kruth,et al. Material incress manufacturing by rapid prototyping techniques , 1991 .

[6] Carol Anderson. Rapid prototyping and manufacturing in the USA , 1997 .

[7] D. Dimitrov,et al. On the achievable accuracy of the three dimensional printing process for rapid prototyping , 2003 .

[8] Paul F. Jacobs,et al. Stereolithography and other RP&M technologies , 1996 .

[9] B. Saravanos,et al. Statistical Analysis of Experimental Data , 2008 .

[10] Terry Wohlers,et al. The rapid prototyping/manufacturing industry , 2003 .

[11] W. R. Buckland,et al. A Dictionary of Statistical Terms: 3rd Edition , 1978 .

[12] T.H.C. Childs,et al. Linear and Geometric Accuracies from Layer Manufacturing , 1994 .

[13] Churchill Eisenhart,et al. Realistic evaluation of the precision and accuracy of instrument calibration systems , 1963 .