Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology

The method we introduced in 1992 for measuring hardness and elastic modulus by instrumented indentation techniques has widely been adopted and used in the characterization of small-scale mechanical behavior. Since its original development, the method has undergone numerous refinements and changes brought about by improvements to testing equipment and techniques as well as from advances in our understanding of the mechanics of elastic–plastic contact. Here, we review our current understanding of the mechanics governing elastic–plastic indentation as they pertain to load and depth-sensing indentation testing of monolithic materials and provide an update of how we now implement the method to make the most accurate mechanical property measurements. The limitations of the method are also discussed.

[1]  M. Khakani,et al.  Effect of laser intensity on the microstructural and mechanical properties of pulsed laser deposited diamond-like-carbon thin films , 1999 .

[2]  Tod A. Laursen,et al.  A study of the mechanics of microindentation using finite elements , 1992 .

[3]  Yang-Tse Cheng,et al.  Relationships between hardness, elastic modulus, and the work of indentation , 1998 .

[4]  An alternative method for penetration depth determination in nanoindentation measurements , 1997 .

[5]  D. Tabor.  Hardness of Metals , 1937, Nature.

[6]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[7]  B. Hendrix.  The use of shape correction factors for elastic indentation measurements , 1995 .

[8]  William D. Nix,et al.  Effects of the substrate on the determination of thin film mechanical properties by nanoindentation , 2002 .

[9]  Michael V. Swain,et al.  A simple predictive model for spherical indentation , 1993 .

[10]  Alexei Bolshakov,et al.  Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques , 1998 .

[11]  G. Pharr,et al.  On the elastic moduli of nanocrystalline Fe, Cu, Ni, and Cu–Ni alloys prepared by mechanical milling/alloying , 1995 .

[12]  William D. Nix,et al.  Mechanical properties of thin films , 1989 .

[13]  Alexei Bolshakov,et al.  Understanding nanoindentation unloading curves , 2002 .

[14]  J. Georges,et al.  Vickers Indentation Curves of Magnesium Oxide (MgO) , 1984 .

[15]  J. Pethica,et al.  Tip Surface Interactions in STM and AFM , 1987 .

[16]  D. Stone,et al.  An investigation of hardness and adhesion of sputter-deposited aluminum on silicon by utilizing a continuous indentation test , 1988 .

[17]  Joost J. Vlassak,et al.  Measuring the elastic properties of anisotropic materials by means of indentation experiments , 1994 .

[18]  M. Munawar Chaudhri,et al.  Accurate determination of the mechanical properties of thin aluminum films deposited on sapphire flats using nanoindentations , 1999 .

[19]  Huajian Gao,et al.  A note on the elastic contact stiffness of a layered medium , 1993 .

[20]  Yang-Tse Cheng,et al.  Scaling approach to conical indentation in elastic-plastic solids with work hardening , 1998 .

[21]  Howard Kuhn,et al.  Mechanical testing and evaluation , 2000 .

[22]  I. N. Sneddon,et al.  The elastic stresses produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch , 1945, Mathematical Proceedings of the Cambridge Philosophical Society.

[23]  Development and application of a combined atomic force microscopy-nanoindentation system with a silicon tip and a diamond indenter , 2002 .

[24]  J. Vlassak,et al.  Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments , 1998 .

[25]  Norman A. Fleck,et al.  Spherical indentation of elastic–plastic solids , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[26]  D. Munz,et al.  Determination of elastic modulus of thin layers using nanoindentation , 1997 .

[27]  Yang-Tse Cheng,et al.  On the initial unloading slope in indentation of elastic-plastic solids by an indenter with an axisymmetric smooth profile , 1997 .

[28]  David M. Follstaedt,et al.  Finite-element modeling of nanoindentation , 1999 .

[29]  W. Oliver,et al.  Hardness measurement at penetration depths as small as 20 nm , 1983 .

[30]  Alexei Bolshakov,et al.  A critical examination of the fundamental relations used in the analysis of nanoindentation data , 1999 .

[31]  A. E. Giannakopoulos,et al.  Analysis of Berkovich indentation , 1996 .

[32]  Yang-Tse Cheng,et al.  Scaling relationships in conical indentation of elastic-perfectly plastic solids , 1999 .

[33]  George M. Pharr,et al.  Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates , 1999 .

[34]  A. E. H. Love,et al.  BOUSSINESQ'S PROBLEM FOR A RIGID CONE , 1939 .

[35]  George M. Pharr,et al.  Measurement of Thin Film Mechanical Properties Using Nanoindentation , 1992 .

[36]  Sarah V. Hainsworth,et al.  Analysis of nanoindentation load-displacement loading curves , 1996 .

[37]  Nancy A. Burnham,et al.  Fundamentals of nanoindentation and nanotribology , 1998 .

[38]  Huajian Gao,et al.  Elastic contact versus indentation modeling of multi-layered materials , 1992 .

[39]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[40]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[41]  Joost J. Vlassak,et al.  Indentation plastic displacement field: Part I. The case of soft films on hard substrates , 1999 .

[42]  G. Pharr.  Measurement of mechanical properties by ultra-low load indentation , 1998 .

[43]  Shefford P. Baker,et al.  Thin films: Stresses and mechanical properties VI , 1997 .

[44]  Michael V. Swain,et al.  Determining the mechanical properties of small volumes of material from submicrometer spherical indentations , 1995 .

[45]  Warren C. Oliver,et al.  Indentation power-law creep of high-purity indium , 1999 .

[46]  Warren C. Oliver,et al.  A new method for analyzing data from continuous depth-sensing microindentation tests , 1990 .

[47]  T. Page,et al.  The effect of coating cracking on the indentation response of thin hard-coated systems , 1998 .

[48]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[49]  R. King,et al.  Elastic analysis of some punch problems for a layered medium , 1987 .

[50]  George M. Pharr,et al.  On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .

[51]  Sandrine Bec,et al.  Improvements in the indentation method with a surface force apparatus , 1996 .

[52]  A. Love.  The Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary , 1929 .

[53]  Wolfgang Grellmann,et al.  Performance and analysis of recording microhardness tests , 1977 .

[54]  Hubert M. Pollock,et al.  An ultra-low-load penetration hardness tester , 1982 .

[55]  D. Stone,et al.  Hardness and elastic modulus of TiN based on continuous indentation technique and new correlation , 1991 .

[56]  B. D. Fabes,et al.  The relationship between indentation and uniaxial creep in amorphous selenium , 1995 .