An artificial immune system algorithm applied to the solution of an inverse problem in unsteady inward solidification

Abstract The numerical simulation and optimization in solidification involving geometries beyond one dimension normally requires expensive computational approaches in memory and data processing, generating consequently high cost associated with runtime execution. When boundary conditions are unknown, such as how heat is extracted from the casting surface, which is a typical inverse heat transfer problem (IHTP), the search for such conditions by trial-and-error makes the whole process less feasible. In this sense, this work introduces the application of an artificial immune system (AIS) algorithm as a possible meta-heuristic alternative, with a view to returning acceptable objective values to converge on a set of acceptable solutions. In the present work, the search process of the heat transfer coefficient (hg) at the casting surface during two-dimensional inward solidification of Al-1.5 wt.%Fe alloy castings of Cartesian and Cylindrical geometries in chilled molds is optimized. Two water-cooled solidification apparatuses were designed to in situ melt the alloy by a set of electrical resistances, in which heat is extracted only through the chilled faces of the molds. The thermal history during solidification was obtained via thermocouples placed at different positions in the castings. A Finite Difference heat transfer model integrated to an optimized version of the artificial immune network algorithm, which uses the experimental thermal profiles as inputs, has been applied to solve the IHTP through the search for acceptable values of heat transfer coefficient. It is shown that fast convergence of the developed algorithm can be achieved for a relatively small number of iterations. The mean relative errors associated with differences between simulated and experimental temperatures are shown to be 1% and 0.07% for Cartesian and Cylindrical geometries, respectively and expressions relating hg to time have been determined for both geometries.

[1]  Mark Jolly,et al.  Casting simulation: How well do reality and virtual casting match? State of the art review , 2002 .

[2]  J. A. Spim,et al.  Application of a heuristic search technique for the improvement of spray zones cooling conditions in continuously cast steel billets , 2006 .

[3]  Leandro Nunes de Castro,et al.  Fundamentals of natural computing: an overview , 2007 .

[4]  H. Şahin,et al.  Determination of unidirectional heat transfer coefficient during unsteady-state solidification at metal casting-chill interface , 2006 .

[5]  George S. Dulikravich,et al.  Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster , 2009 .

[6]  José E. Spinelli,et al.  Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni , 2012, Journal of Electronic Materials.

[7]  Kaisa Miettinen,et al.  New Perspective to Continuous Casting of Steel with a Hybrid Evolutionary Multiobjective Algorithm , 2011 .

[8]  Damian Słota,et al.  Restoring boundary conditions in the solidification of pure metals , 2011 .

[9]  J. A. Spim,et al.  A solidification heat transfer model and a neural network based algorithm applied to the continuous casting of steel billets and blooms , 2005 .

[10]  Miha Kovačič,et al.  Genetic programming prediction of the natural gas consumption in a steel plant , 2014 .

[11]  Joel Johansson,et al.  A methodology for microstructure-based structural optimization of cast and injection moulded parts using knowledge-based design automation , 2017, Adv. Eng. Softw..

[12]  Leandro Nunes de Castro,et al.  Fundamentals of Natural Computing - Basic Concepts, Algorithms, and Applications , 2006, Chapman and Hall / CRC computer and information science series.

[13]  Luoxing Li,et al.  Inverse identification of interfacial heat transfer coefficient between the casting and metal mold using neural network , 2010 .

[14]  Felipe Bertelli,et al.  Heat Transfer Characteristics of Inward, Outward and Upward Solidification of an Al-1.5wt%Fe Alloy in Cylindrical Chill Molds , 2012 .

[15]  V. Voller,et al.  ERAL SOURCE-BASED METHOD FOR SOLIDIFICATION PHASE CHANGE , 1991 .

[16]  Tea Tusar,et al.  Discrete vs. continuous multiobjective optimization of continuous casting of steel , 2012, GECCO '12.

[17]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[18]  Dinghua Zhang,et al.  Determination of interfacial heat-transfer coefficient during investment-casting process of single-crystal blades , 2011 .

[19]  Hugo E. Hernandez-Figueroa,et al.  An Artificial Immune System for Optical Fiber Based Directional Couplers Multiplexer/Demultiplexers Design , 2010 .

[20]  Antonio Piccininni,et al.  Determination of interfacial heat transfer coefficients in a sand mould casting process using an optimised inverse analysis , 2015 .

[21]  Damian Słota,et al.  Application of the Swarm Intelligence Algorithm for Investigating the Inverse Continuous Casting Problem , 2013 .

[22]  José E. Spinelli,et al.  Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys , 2016, Journal of Materials Science: Materials in Electronics.

[23]  José E. Spinelli,et al.  An alternative thermal approach to evaluate the wettability of solder alloys , 2016 .

[24]  Xudong Wang,et al.  Neural networks for solving the inverse heat transfer problem of continuous casting mould , 2011, 2011 Seventh International Conference on Natural Computation.

[25]  Jun Chen,et al.  A new holistic systems approach to the design of heat treated alloy steels using a biologically inspired multi-objective optimisation algorithm , 2015, Eng. Appl. Artif. Intell..

[26]  José Ignacio Hidalgo,et al.  Using evolutionary algorithms to determine the residual stress profile across welds of age-hardenable aluminum alloys , 2016, Appl. Soft Comput..

[27]  S. H. Seyedein,et al.  Modeling of steady state hot flow behavior of API-X70 microalloyed steel using genetic algorithm and design of experiments , 2017, Appl. Soft Comput..

[28]  Mustafa Gündüz,et al.  Dependency of microindentation hardness on solidification processing parameters and cellular spacing in the directionally solidified Al based alloys , 2009 .

[29]  Felipe Bertelli,et al.  Evaluation of thermophysical properties of Al–Sn–Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification , 2016 .

[30]  Noé Cheung,et al.  Melt characteristics and solidification growth direction with respect to gravity affecting the interfacial heat transfer coefficient of chill castings , 2009 .

[31]  José E. Spinelli,et al.  Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient , 2012 .

[32]  Amauri Garcia,et al.  The use of a heuristic search technique for the optimization of quality of steel billets produced by continuous casting , 2001 .

[33]  D. Słota.  Identification of the Cooling Condition in 2-D and 3-D Continuous Casting Processes , 2009 .

[34]  Leandro Nunes de Castro,et al.  aiNet: An Artificial Immune Network for Data Analysis , 2002 .

[35]  Damian Słota,et al.  Identification of the Heat Transfer Coefficient in the Inverse Stefan Problem by Using the ABC Algorithm , 2012 .

[36]  Fernando Niño,et al.  Recent Advances in Artificial Immune Systems: Models and Applications , 2011, Appl. Soft Comput..

[37]  Ronald Waverley Ruddle,et al.  The solidification of castings , 1957 .

[38]  Michel Bellet,et al.  Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation , 2004 .

[39]  W. Paszkowicz,et al.  Genetic Algorithms, a Nature-Inspired Tool: A Survey of Applications in Materials Science and Related Fields: Part II , 2009 .

[40]  B. Blackwell,et al.  Inverse Heat Conduction: Ill-Posed Problems , 1985 .

[41]  Felipe Bertelli,et al.  An Effective Inverse Heat Transfer Procedure Based on Evolutionary Algorithms to Determine Cooling Conditions of a Steel Continuous Casting Machine , 2015 .

[42]  Damian Słota,et al.  Determination of Optimal Parameters for the Immune Algorithm Used for Solving Inverse Heat Conduction Problems with and without a Phase Change , 2012 .

[43]  Ricardo Landa Becerra,et al.  Evolutionary Multiobjective Optimization in Materials Science and Engineering , 2009 .

[44]  José E. Spinelli,et al.  Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys , 2009 .

[45]  J. A. Spim,et al.  Application of a Solidification Mathematical Model and a Genetic Algorithm in the Optimization of Strand Thermal Profile Along the Continuous Casting of Steel , 2005 .

[46]  Jonathan Timmis,et al.  Theoretical advances in artificial immune systems , 2008, Theor. Comput. Sci..

[47]  Carlos Alexandre dos Santos,et al.  Determination of transient interfacial heat transfer coefficients in chill mold castings , 2001 .

[48]  Xu-dong Wang,et al.  Inverse problem-coupled heat transfer model for steel continuous casting , 2014 .