Economic-design optimization of cross laminated timber plates with ribs

Abstract An economic-design optimization of cross-laminated timber (CLT) plate with stiffening ribs is presented. For the structural analysis, an enhanced assumed strain (EAS) solid finite element is used. It behaves well for thin plates (with no shear locking) and delivers reasonable approximations for the transverse shear stresses in layered composites. Eurocodes 5 (EC5) are followed in defining the optimization constraints, which include deflections, stresses and fundamental eigenfrequency. The gradient optimization is performed. Analytical expressions for sensitivities are obtained by an automatic differentiation tool. The result is an economic timber plate configuration that complies with the EC5 requirements. Numerical examples are presented in order to illustrate the approach.

[1]  H. Gulvanessian,et al.  EN1990 Eurocode—Basis of structural design , 2001 .

[2]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[3]  Ireneusz Kreja,et al.  A literature review on computational models for laminated composite and sandwich panels , 2011 .

[4]  Peter Wriggers,et al.  An improved EAS brick element for finite deformation , 2010 .

[5]  Marko Kegl,et al.  Shape optimization of truss-stiffened shell structures with variable thickness , 2006 .

[6]  J. C. Simo,et al.  A CLASS OF MIXED ASSUMED STRAIN METHODS AND THE METHOD OF INCOMPATIBLE MODES , 1990 .

[7]  H. J. Larsen,et al.  DS/ENV 1995-1-1 NAD National Application Document for Eurocode 5: Design of Timber Structures, Part 1-1: General Rules and Rules for Buildings , 1994 .

[8]  B. Brank,et al.  Discretization error for the Discrete Kirchhoff plate finite element approximation , 2014 .

[9]  Meng Gong,et al.  Measurement of rolling shear modulus and strength of cross laminated timber fabricated with black spruce , 2014 .

[10]  L. Vu-Quoc,et al.  Efficient Hybrid-EAS solid element for accurate stress prediction in thick laminated beams, plates, and shells , 2013 .

[11]  Marko Kegl,et al.  An efficient gradient‐based optimization algorithm for mechanical systems , 2002 .

[12]  Boštjan Harl,et al.  Efficient handling of stability problems in shell optimization by asymmetric 'worst-case' shape imperfection , 2008 .

[13]  R. Brandner,et al.  Cross laminated timber (CLT): overview and development , 2015, European Journal of Wood and Wood Products.

[14]  Peter Niemz,et al.  Versuche und Berechnungen an allseitig gelagerten 3-schichtigen Brettsperrholzplatten , 2007, Holz als Roh- und Werkstoff.

[15]  Boštjan Brank,et al.  On composite shell models with a piecewise linear warping function , 2003 .

[16]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[17]  E. I. Saavedra Flores,et al.  Multi-scale modelling of rolling shear failure in cross-laminated timber structures by homogenisation and cohesive zone models , 2016 .

[18]  Karin Hofstetter,et al.  Structural design of Cross Laminated Timber (CLT) by advanced plate theories , 2010 .

[19]  Glauco Feltrin,et al.  Cross-Laminated Timber Plates: Evaluation and Verification of Homogenized Elastic Properties , 2007 .