A generalized multiphase modelling approach for multiscale flows

[1]  Kent E. Wardle,et al.  Numerical Investigation of Vertical Plunging Jet Using a Hybrid Multifluid–VOF Multiphase CFD Solver , 2015 .

[2]  Akio Tomiyama,et al.  Multi-fluid simulation of turbulent bubbly pipe flows , 2009 .

[3]  N. Cheremisinoff,et al.  Shapes and velocities of single drops and bubbles moving freely through immiscible liquids. , 1976 .

[4]  K. Einarsrud,et al.  Comparison of Surface Tension Models for the Volume of Fluid Method , 2019, Processes.

[5]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[6]  D. Kuzmin,et al.  Quantitative benchmark computations of two‐dimensional bubble dynamics , 2009 .

[7]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[8]  D. Bestion,et al.  Applicability of two-phase CFD to nuclear reactor thermalhydraulics and elaboration of Best Practice Guidelines , 2012 .

[9]  M. Fairweather,et al.  Multiphase turbulence in bubbly flows: RANS simulations , 2015 .

[10]  Michael Fairweather,et al.  A coupled level set and volume of fluid method with a re-initialisation step suitable for unstructured meshes , 2020, J. Comput. Phys..

[11]  H. Blanch,et al.  Bubble coalescence and break‐up in air‐sparged bubble columns , 1990 .

[12]  Naoki Shimada,et al.  Modeling and Hybrid Simulation of Bubbly Flow , 2006 .

[13]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[14]  Eckhard Krepper,et al.  Application of a new concept for multi-scale interfacial structures to the dam-break case with an obstacle , 2014 .

[16]  Thomas Höhne,et al.  Validation of closure models for interfacial drag and turbulence in numerical simulations of horizontal stratified gas–liquid flows , 2014 .

[17]  J. Fabre,et al.  EXPERIMENTAL DATA SET NO. 7: STRATIFIED FLOW, PART I: LOCAL STRUCTURE , 1987 .

[18]  E.M.J. Komen,et al.  A Hybrid Dispersed-Large Interface Solver for multi-scale two-phase flow modelling , 2019, Nuclear Engineering and Design.

[19]  Lyes Khezzar,et al.  Characterization of plunging liquid jets: A combined experimental and numerical investigation , 2011 .

[20]  Pierre Coste.  A Large Interface Model for two-phase CFD , 2013 .

[21]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[22]  Gian Piero Celata,et al.  Terminal velocity of single bubbles in surface tension force dominant regime , 2002 .

[23]  Borut Mavko,et al.  Simulations of free surface flows with implementation of surface tension and interface sharpening in the two-fluid model , 2009 .

[24]  M. Fairweather,et al.  Implications of hydrodynamics on the design of pulsed sieve-plate extraction columns: A one-fluid multiphase CFD model using the volume of fluid method , 2020, Chemical Engineering Science.

[25]  T. Frank,et al.  The Favre Averaged Drag Model for Turbulent Dispersion in Eulerian Multi-Phase Flows , 2004 .

[26]  Mark W. Hlawitschka,et al.  One-Group Reduced Population Balance Model for CFD Simulation of a Pilot-Plant Extraction Column , 2010 .

[27]  Eckhard Krepper,et al.  The inhomogeneous MUSIG model for the simulation of polydispersed flows , 2008 .

[28]  Andrea Prosperetti,et al.  On the mechanism of air entrainment by liquid jets at a free surface , 2000, Journal of Fluid Mechanics.

[29]  Holger Marschall,et al.  Numerical Simulation of Multi-Scale Two-Phase Flows Using a Hybrid Interface-Resolving Two-Fluid Model (HIRES-TFM) , 2013 .

[30]  J. Flaherty,et al.  Analysis of phase distribution in fully developed laminar bubbly two-phase flow , 1991 .

[31]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[32]  Thomas Höhne,et al.  EXPERIMENTS AND NUMERICAL SIMULATIONS OF HORIZONTAL TWO PHASE FLOW REGIMES , 2009 .

[33]  Kent E. Wardle,et al.  Hybrid Multiphase CFD Solver for Coupled Dispersed/Segregated Flows in Liquid-Liquid Extraction , 2013 .

[34]  J. Smagorinsky,et al.  GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS , 1963 .

[35]  Suad Jakirlić,et al.  Drop impact onto a liquid layer of finite thickness: dynamics of the cavity evolution. , 2009, Physical review. E, Statistical, nonlinear, and soft matter physics.

[36]  J. Dgheim,et al.  Estimation curvature in PLIC-VOF method for interface advection , 2020, Heat and Mass Transfer.

[37]  Jaehoon Han,et al.  Simulation of Multiphase Flows in Complex Geometry Using a Hybrid Method Combining the Multi-Fluid and the Volume-of-Fluid (VOF) Approaches , 2002 .

[38]  Juan C. Lasheras,et al.  On the breakup of an air bubble injected into a fully developed turbulent flow. Part 1. Breakup frequency , 1999, Journal of Fluid Mechanics.

[39]  G. Kreiss,et al.  A conservative level set method for two phase flow II , 2005, Journal of Computational Physics.

[40]  M. Sussman,et al.  A Coupled Level Set and Volume-of-Fluid Method for Computing 3D and Axisymmetric Incompressible Two-Phase Flows , 2000 .

[41]  Eckhard Krepper,et al.  A multi-field two-fluid concept for transitions between different scales of interfacial structures , 2012 .

[42]  Hidesada Tamai,et al.  Transverse migration of single bubbles in simple shear flows , 2002 .

[43]  Simon Lo,et al.  A large scale interface multi-fluid model for simulating multiphase flows , 2017 .

[44]  Iztok Tiselj,et al.  Two‐fluid model with interface sharpening , 2011 .

[45]  K. Yan,et al.  A coupled model for simulation of the gas–liquid two-phase flow with complex flow patterns , 2010 .

[46]  Stojan Petelin,et al.  Coupling of the interface tracking and the two-fluid models for the simulation of incompressible two-phase flow , 2001 .

[47]  O. Oxtoby,et al.  MODELLING SURFACE TENSION DOMINATED MULTIPHASE FLOWS USING THE VOF APPROACH , 2014 .

[48]  H. L. Wen,et al.  Numerical simulation of dam-break flow impacting a stationary obstacle by a CLSVOF/IB method , 2019, Commun. Nonlinear Sci. Numer. Simul..