Experimental study of the heat transfer through a vertical stack of rectangular cavities filled with phase change materials

The heat transfer through a vertical stack of rectangular cavities filled with phase change materials (PCMs) is experimentally analysed in terms of both melting and solidification processes. This paper provides data that are useful for benchmarking and validation of numerical models that account for natural convection in the molten PCM. Two different PCMs are investigated: the free-form PCM-Rubitherm® RT 28 HC; and the microencapsulated PCM-Micronal® DS 5001 X. In terms of practical applications, the main goal is to discuss which PCM type is better for building applications. The time required for the melting and solidification fronts to reach the mid-plane of the cavities is presented as a function of the PCM type. During charging, the control-temperature value on the hot surface of the test-sample and the period of thermal-regulation are investigated. It is shown that the free PCM is preferable for the thermal control of vertical systems as both parameters are improved due to natural convection. The use of microencapsulated PCMs allows accelerating the charging process with almost no thermal stratification. However, in this case the control-temperature effect and the thermal-regulation period are both reduced. Regarding the discharging process, subcooling plays an important role during the solidification of the free PCM and its effect cannot be neglected when modelling.

[1]  R. Lehtiniemi,et al.  Numerical and experimental investigation of melting and freezing processes in phase change material storage , 2004 .

[2]  Romeu Vicente,et al.  Brick masonry walls with PCM macrocapsules: An experimental approach , 2014 .

[3]  K. Srinivasan,et al.  A numerical model for heat sinks with phase change materials and thermal conductivity enhancers , 2006 .

[4]  C. Balaji,et al.  Method to improve geometry for heat transfer enhancement in PCM composite heat sinks , 2005 .

[5]  Raya Al-Dadah,et al.  Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks , 2013 .

[6]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[7]  S. D. Pohekar,et al.  Performance enhancement in latent heat thermal storage system: A review , 2009 .

[8]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[9]  Feng Xing,et al.  Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels , 2014 .

[10]  Pascal Henry Biwole,et al.  Phase-change materials to improve solar panel's performance , 2013 .

[11]  R. Velraj,et al.  Review on free cooling of buildings using phase change materials , 2010 .

[12]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[13]  Philip C. Eames,et al.  Comparison of a Small Scale 3-d PCM Thermal Control Model with a Validated 2-d PCM Thermal Control Model , 2006 .

[14]  Ramalingam Velraj,et al.  Sub cooling of PCM due to various effects during solidification in a vertical concentric tube thermal storage unit , 2013 .

[15]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[16]  Philippe Marty,et al.  Experimental and numerical study of annular PCM storage in the presence of natural convection , 2013 .

[17]  Daniel R. Rousse,et al.  A numerical study of the melting of phase change material heated from a vertical wall of a rectangular enclosure , 2009 .

[18]  P. Dutta,et al.  Heat transfer correlations for PCM-based heat sinks with plate fins , 2010 .

[19]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[20]  Miguel Ángel Martínez,et al.  Physico-chemical and mechanical properties of microencapsulated phase change material , 2013 .

[21]  Yvan Dutil,et al.  A review on phase-change materials: Mathematical modeling and simulations , 2011 .

[22]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[23]  El Khadir Lakhal,et al.  Computation of melting with natural convection inside a rectangular enclosure heated by discrete protruding heat sources , 2013 .

[24]  Kamaruzzaman Sopian,et al.  CFD applications for latent heat thermal energy storage: a review , 2013 .

[25]  M. J. Huang,et al.  The effect of using two PCMs on the thermal regulation performance of BIPV systems , 2009 .

[26]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[27]  Hossein Shokouhmand,et al.  Experimental investigation on melting heat transfer characteristics of lauric acid in a rectangular thermal storage unit , 2013 .

[28]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[29]  Romeu Vicente,et al.  Numerical evaluation of a phase change material–shutter using solar energy for winter nighttime indoor heating , 2014 .

[30]  Victor M. Ferreira,et al.  Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution , 2012 .

[31]  Brian Norton,et al.  Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics , 2010 .

[32]  Luisa F. Cabeza,et al.  Review on phase change materials (PCMs) for cold thermal energy storage applications , 2012 .

[33]  K. Cen,et al.  Effects of melting temperature and the presence of internal fins on the performance of a phase change material (PCM)-based heat sink , 2013 .

[34]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[35]  Luisa F. Cabeza,et al.  Modeling phase change materials behavior in building applications: Comments on material characterization and model validation , 2012 .

[36]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[37]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[38]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[39]  Arun S. Mujumdar,et al.  Application of phase change materials in thermal management of electronics , 2007 .

[40]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[41]  Philip C. Eames,et al.  Natural convection in an internally finned phase change material heat sink for the thermal management of photovoltaics , 2011 .

[42]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[43]  Brian Norton,et al.  Phase change materials for limiting temperature rise in building integrated photovoltaics , 2006 .

[44]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[45]  Liwu Fan,et al.  Thermal conductivity enhancement of phase change materials for thermal energy storage: A review , 2011 .

[46]  S. C. Kaushik,et al.  DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .

[47]  Denis Bruneau,et al.  Numerical modelling of tube bundle thermal energy storage for free-cooling of buildings , 2013 .

[48]  Yuwen Zhang,et al.  Melting in an enclosure with discrete heating at a constant rate , 1993 .

[49]  Georgios Kokogiannakis,et al.  Thermal management systems for Photovoltaics (PV) installations: A critical review , 2013 .

[50]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[51]  Philip C. Eames,et al.  Thermal regulation of building-integrated photovoltaics using phase change materials , 2004 .

[52]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[53]  M. Lacroix,et al.  NUMERICAL SIMULATION OF NATURAL CONVECTION-DOMINATED MELTING AND SOLIDIFICATION FROM A FINNED VERTICAL WALL , 1997 .

[54]  G. Ziskind,et al.  Numerical investigation of a PCM-based heat sink with internal fins , 2005 .

[55]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[56]  Syed E. Hasan,et al.  Thermophysical Properties Of Rocks , 1978 .

[57]  Wei-Biao Ye,et al.  Fluid flow and heat transfer in a latent thermal energy unit with different phase change material (PCM) cavity volume fractions. , 2012 .

[58]  F. Kuznik,et al.  Interpretation of calorimetry experiments to characterise phase change materials , 2014 .

[59]  A. Oliva,et al.  Numerical simulation of a latent heat thermal energy storage system with enhanced heat conduction , 1998 .

[60]  Rong Cui.  Effect of selected phase change materials concentration and manufacturing process on the properties of plaster mixture systems , 2011 .

[61]  Luisa F. Cabeza,et al.  Unconventional experimental technologies available for phase change materials (PCM) characterization. Part 1. Thermophysical properties , 2015 .

[62]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[63]  Gennady Ziskind,et al.  Numerical and experimental study of melting in a spherical shell , 2007 .

[64]  L. Pires,et al.  Transient behaviour of a latent-heat thermal-energy store: numerical and experimental studies , 2002 .

[65]  Yves Candau,et al.  Thermal characterization of polymer matrix composites containing microencapsulated paraffin in solid or liquid state , 2014 .

[66]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[67]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .