Design and experiments of micro pump using ICPF actuator

The authors propose a new prototype model of a micro pump using an ICPF (ionic conducting polymer film) actuator as the servo actuator. This micro pump consists of two one-way valves that make use of the same ICPF actuator. The overall size of this micro pump prototype is 12 mm in diameter and 20 mm in length. The actuating mechanism is as follows. (1) The ICPF actuator used as the diaphragm is bent into the anode side by application of electricity. Then the volume of the pump chamber increases, resulting in the inflow of liquid from the inlet to the chamber. (2) By changing the current direction, the volume of the pump chamber decreases, resulting in liquid flow from the chamber to the outlet. (3) When the ICPF actuator is given a sinusoidal voltage, the micro pump provides liquid flow from the inlet to the outlet continuously. The characteristics of the micro pump have been measured. The experimental results indicate that the micro pump has satisfactory responses.

[1]  Yoshihito Osada,et al.  ELECTRICALLY ACTIVATED MECHANOCHEMICAL DEVICES USING POLYELECTROLYTE GELS , 1985 .

[2]  Y. Osada,et al.  A polymer gel with electrically driven motility , 1992, Nature.

[3]  Kazuhiro Kosuge,et al.  Micro catheter system with active guide wire , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[4]  D De Rossi,et al.  Electrically induced contractile phenomena in charged polymer networks: preliminary study on the feasibility of muscle-like structures. , 1985, Transactions - American Society for Artificial Internal Organs.

[5]  Toyoichi Tanaka,et al.  Collapse of Gels in an Electric Field , 1982, Science.

[6]  Toshio Fukuda,et al.  Structure and mechanism of two types of micro-pump using polymer gel , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.