Factors Affecting Heat Transfer in a Diesel Engine: Low Heat Rejection Engine Revisited

[1]  C. Tropea,et al.  Droplet-wall collisions: Experimental studies of the deformation and breakup process , 1995 .

[2]  D C Siegla,et al.  EXPLORATORY STUDY OF THE LOW-HEAT-REJECTION DIESEL FOR PASSENGER-CAR APPLICATION , 1984 .

[3]  P. G. Hill,et al.  Effects of Injection Changes on Efficiency and Emissions of a Diesel Engine Fueled by Direct Injection of Natural Gas , 2000 .

[4]  R. Reitz,et al.  A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling , 1997 .

[5]  P. Senecal,et al.  Multi-Dimensional Modeling of Direct-Injection Diesel Spray Liquid Length and Flame Lift-off Length using CFD and Parallel Detailed Chemistry , 2003 .

[6]  Gerhard Woschni,et al.  Heat insulation of combustion chamber walls ― a measure to decrease the fuel consumption of I.C. engines? , 1987 .

[7]  Richard Patton,et al.  High Efficiency Internal Combustion Stirling Engine Development , 2011 .

[8]  D. T. Hountalas,et al.  Available Strategies for Improving the Efficiency of DI Diesel Engines-A Theoretical Investigation , 2000 .

[9]  Peter J. O'Rourke,et al.  A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model , 2000 .

[10]  Wallace R. Wade,et al.  Fuel economy opportunities with an uncooled Dl diesel engine , 1984 .

[11]  A. C. Alkidas,et al.  Evaluation of an Air-Gap-Insulated Piston in a Divided-Chamber Diesel Engine , 1985 .

[12]  N Ladommatos,et al.  The effect of piston bowl temperature on diesel exhaust emissions , 2005 .

[14]  John B. Heywood,et al.  SIMULATION STUDIES OF THE EFFECTS OF TURBOCHARGING AND REDUCED HEAT TRANSFER ON SPARK-IGNITION ENGINE OPERATION , 1980 .

[15]  A. N. Pawar,et al.  COMBUSTION ANALYSIS AND PERFORMANCE OF LOW HEAT REJECTION DIESEL ENGINE WITH DIFFERENT THERMAL INSULATION COATING , 2004 .

[16]  J. Naber,et al.  Hydrodynamics of Droplet Impingement on a Heated Surface , 1993 .

[17]  A. A. Amsden,et al.  A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines , 1996 .

[18]  Milad Mekari,et al.  Advanced Diesel Engine 42% Brake Thermal Efficiency Technology Demonstrators , 2011 .

[19]  R. Reitz,et al.  Structure of High-Pressure Fuel Sprays , 1987 .

[20]  D. E. Winterbone,et al.  Laser Illuminated Photographic Studies of the Spray and Combustion Phenomena in a Small High Speed DI Diesel Engine , 1992 .

[21]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[22]  P. Senecal,et al.  Modeling high-speed viscous liquid sheet atomization , 1999 .

[23]  Kosuke Toyama,et al.  Capabilities of Heat Insulated Diesel Engine , 1982 .

[24]  A. A. Amsden,et al.  KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves , 1997 .

[25]  P. K. Senecal,et al.  A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations , 2007 .

[26]  A. Alkidas,et al.  Experiments with an Uncooled Single-Cylinder Open-Chamber Diesel , 1987 .

[27]  R. H. Thring.  Low heat rejection engines , 1986 .

[28]  Hajime Fujimoto,et al.  Modeling of Diesel Spray Impingement on a Flat Wall , 1994 .

[29]  T. Poinsot,et al.  Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engine Computations , 1997 .

[30]  S. Orszag,et al.  Renormalization group analysis of turbulence. I. Basic theory , 1986 .

[31]  S. Henningsen.  Evaluation of Emissions and Heat-Release Characteristics from a Simulated Low-Heat-Rejection Diesel Engine , 1987 .