On-chip fast mixing by a rotary peristaltic micropump with a single structural layer

In this work, a rotary pump based micromixer for on-chip rapid mixing and liquid transportation is demonstrated and characterized. Both pumping and mixing are realized using a microfluidic chip with a single structural polydimethylsiloxane layer and a portable electric control system. The rotary pump consists of an annular channel and is driven by a motor and magnets. The flow field caused by the peristaltic movement of the channel membrane of the rotary pump is simulated and analyzed. By statistically calculating and comparing the normalized standard deviations of the flow velocity components in a microchannel, it is revealed that up-and-down mixing is the fastest, followed by segment mixing and parallel mixing. Two mixing styles, segment mixing and parallel mixing, were experimentally demonstrated using the chip. The pump achieved 90% of the mixing index in 1 s for the segment mixing type. As for the parallel mixing type, the mixing index was up to 90% after 5 s, which is more than 100-fold improvement compared to conventional mixing by interfacial diffusion. The mixing speeds in both directions were improved prominently by increasing the rotational speed of the pump.

[1]  Chang Liu,et al.  Micro magnetic stir-bar mixer integrated with parylene microfluidic channels. , 2004, Lab on a chip.

[2]  Noritada Kaji,et al.  Immuno-pillar chip: a new platform for rapid and easy-to-use immunoassay. , 2010, Lab on a chip.

[3]  Tza‐Huei Wang,et al.  Micro magnetic gyromixer for speeding up reactions in droplets , 2012, Microfluidics and nanofluidics.

[4]  Eric D. Salin,et al.  Micromixing by pneumatic agitation on continually rotating centrifugal microfluidic platforms , 2012 .

[5]  T. Johnson,et al.  Rapid microfluidic mixing. , 2002, Analytical chemistry.

[6]  B. Finlayson,et al.  Quantitative analysis of molecular interaction in a microfluidic channel: the T-sensor. , 1999, Analytical chemistry.

[7]  Gwo-Bin Lee,et al.  Active micro-mixers using surface acoustic waves on Y-cut 128° LiNbO3 , 2006 .

[8]  Wenbin Cao,et al.  Design and integration of an all-in-one biomicrofluidic chip. , 2008, Biomicrofluidics.

[9]  Gwo-Bin Lee,et al.  Membrane-activated microfluidic rotary devices for pumping and mixing , 2007, Biomedical microdevices.

[10]  Andreas Manz,et al.  Latest developments in micro total analysis systems. , 2010, Analytical chemistry.

[11]  Nam-Trung Nguyen,et al.  Micromixers?a review , 2005 .

[12]  C. Ahn,et al.  A disposable on-chip phosphate sensor with planar cobalt microelectrodes on polymer substrate. , 2007, Biosensors & bioelectronics.

[13]  Ruey-Jen Yang,et al.  Computational analysis of electrokinetically driven flow mixing in microchannels with patterned blocks , 2004 .

[14]  Cheng-Hsien Liu,et al.  A novel electrokinetic micromixer , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[15]  Shoji Takeuchi,et al.  A trap-and-release integrated microfluidic system for dynamic microarray applications , 2007, Proceedings of the National Academy of Sciences.

[16]  S. Quake,et al.  From micro- to nanofabrication with soft materials. , 2000, Science.

[17]  Che-Hsin Lin,et al.  Microfluidic T-form mixer utilizing switching electroosmotic flow. , 2004, Analytical chemistry.

[18]  P. Abgrall,et al.  Lab-on-chip technologies: making a microfluidic network and coupling it into a complete microsystem—a review , 2007 .

[19]  Zhaoying Zhou,et al.  A Peristaltic Micro Pump Driven by a Rotating Motor with Magnetically Attracted Steel Balls , 2009, Sensors.