Recommendations for tool-handle material choice based on finite element analysis.

Huge areas of work are still done manually and require the usages of different powered and non-powered hand tools. In order to increase the user performance, satisfaction, and lower the risk of acute and cumulative trauma disorders, several researchers have investigated the sizes and shapes of tool-handles. However, only a few authors have investigated tool-handles' materials for further optimising them. Therefore, as presented in this paper, we have utilised a finite-element method for simulating human fingertip whilst grasping tool-handles. We modelled and simulated steel and ethylene propylene diene monomer (EPDM) rubber as homogeneous tool-handle materials and two composites consisting of EPDM rubber and EPDM foam, and also EPDM rubber and PU foam. The simulated finger force was set to obtain characteristic contact pressures of 20 kPa, 40 kPa, 80 kPa, and 100 kPa. Numerical tests have shown that EPDM rubber lowers the contact pressure just slightly. On the other hand, both composites showed significant reduction in contact pressure that could lower the risks of acute and cumulative trauma disorders which are pressure-dependent. Based on the results, it is also evident that a composite containing PU foam with a more evident and flat plateau deformed less at lower strain rates and deformed more when the plateau was reached, in comparison to the composite with EPDM foam. It was shown that hyper-elastic foam materials, which take into account the non-linear behaviour of fingertip soft tissue, can lower the contact pressure whilst maintaining low deformation rate of the tool-handle material for maintaining sufficient rate of stability of the hand tool in the hands. Lower contact pressure also lowers the risk of acute and cumulative trauma disorders, and increases comfort whilst maintaining performance.

[1]  C Fransson-Hall,et al.  Sensitivity of the hand to surface pressure. , 1993, Applied ergonomics.

[2]  Mahmut Eksioglu,et al.  Relative optimum grip span as a function of hand anthropometry , 2004 .

[3]  V Putz-Anderson,et al.  Prevalence and work-relatedness of self-reported carpal tunnel syndrome among U.S. workers: analysis of the Occupational Health Supplement data of 1988 National Health Interview Survey. , 1995, American journal of industrial medicine.

[4]  Yong-Ping Zheng,et al.  An ultrasound indentation system for biomechanical properties assessment of soft tissues in-vivo , 1995, IEEE Transactions on Biomedical Engineering.

[5]  Wan Abas Wa.  Biaxial tension test of human skin in vivo. , 1994 .

[6]  K. L. Edwards,et al.  Design, materials selection and marketing of successful products , 2003 .

[7]  A Freivalds,et al.  Ergonomics evaluation of a foam rubber grip for tool handles. , 1991, Applied ergonomics.

[8]  Marina Novak,et al.  Computer aided decision support in product design engineering , 2012 .

[9]  Ravindra S. Goonetilleke,et al.  Contact Area Effects on Discomfort , 1994 .

[10]  L.F.M. Kuijt-Evers,et al.  Comfort predictors for different kinds of hand tools: Differences and similarities , 2007 .

[11]  Robert G. Radwin,et al.  Pistol Grip Power Tool Handle and Trigger Size Effects on Grip Exertions and Operator Preference , 1993, Human factors.

[12]  Paul W. Brand,et al.  Clinical mechanics of the hand , 1985 .

[13]  S. Naidu.  Clinical mechanics of the hand, 3rd ed , 2000 .

[14]  Noboru Kikuchi,et al.  Constitutive modeling of polymeric foam material subjected to dynamic crash loading , 1998 .

[15]  J. A. Clark,et al.  Mechanical properties of normal skin and hypertrophic scars. , 1996, Burns : journal of the International Society for Burn Injuries.

[16]  L. Phillips,et al.  Creep vs. stretch: a review of the viscoelastic properties of skin. , 1998, Annals of plastic surgery.

[17]  Barkawi Sahari,et al.  A review of constitutive models for rubber-like materials , 2010 .

[18]  S Riedel.  Consideration of grip and push forces for the assessment of vibration exposure. , 1995, Central European journal of public health.

[19]  Yong-Ku Kong,et al.  Optimal cylindrical handle diameter for grip force tasks , 2005 .

[20]  D. Rempel,et al.  Work-related cumulative trauma disorders of the upper extremity. , 1992, JAMA.

[21]  T. Tamizharasan,et al.  Optimization of cutting inserts geometry using DEFORM-3D: Numerical simulation and experimental validation , 2012 .

[22]  Robert G. Radwin,et al.  Power hand tool vibration effects on grip exertions , 1987 .

[23]  R G Dong,et al.  Analysis of the contact interactions between fingertips and objects with different surface curvatures , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[24]  J. Wu,et al.  Analysis of the dynamic strains in a fingertip exposed to vibrations: Correlation to the mechanical stimuli on mechanoreceptors. , 2006, Journal of biomechanics.

[25]  L. Punnett,et al.  Work-related musculoskeletal disorders: the epidemiologic evidence and the debate. , 2004, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[26]  P Vink,et al.  Identifying factors of comfort in using hand tools. , 2004, Applied ergonomics.

[27]  D. E. Welcome,et al.  Contact pressure distribution at hand–handle interface: role of hand forces and handle size , 2005 .

[28]  S. Tanaka,et al.  Association of occupational and non-occupational risk factors with the prevalence of self-reported carpal tunnel syndrome in a national survey of the working population. , 1998, American journal of industrial medicine.

[29]  G. J. Gouw,et al.  A study of hand grip pressure distribution and EMG of finger flexor muscles under dynamic loads. , 1995, Ergonomics.

[30]  Ren G Dong,et al.  Finite element analysis of the penetrations of shear and normal vibrations into the soft tissues in a fingertip. , 2007, Medical engineering & physics.

[31]  R G Dong,et al.  Simulation of mechanical responses of fingertip to dynamic loading. , 2002, Medical engineering & physics.

[32]  M. de Looze,et al.  Please Scroll down for Article Ergonomics Sitting Comfort and Discomfort and the Relationships with Objective Measures Sitting Comfort and Discomfort and the Relationships with Objective Measures , 2022 .

[33]  M. Miodownik,et al.  The use of physical property data to predict the touch perception of materials , 2012 .

[34]  F. Foster,et al.  Ultrasonic and viscoelastic properties of skin under transverse mechanical stress in vitro. , 1998, Ultrasound in medicine & biology.

[35]  W. J. Deng,et al.  NUMERICAL ANALYSIS OF RECTANGULAR GROOVE CUTTING WITH DIFFERENT RC TOOLS , 2013 .

[36]  Yong Zhang,et al.  Compressive response and energy absorption of foam EPDM , 2007 .

[37]  Marina Novak,et al.  Intelligent decision support for structural design analysis , 2011, Adv. Eng. Informatics.

[38]  Ren G Dong,et al.  Simultaneous determination of the nonlinear‐elastic properties of skin and subcutaneous tissue in unconfined compression tests , 2007, Skin research and technology : official journal of International Society for Bioengineering and the Skin (ISBS) [and] International Society for Digital Imaging of Skin (ISDIS) [and] International Society for Skin Imaging.

[39]  Zuhua Jiang,et al.  Pressure thresholds of the human foot: measurement reliability and effects of stimulus characteristics , 2011, Ergonomics.

[40]  B. Song,et al.  Novel model for uniaxial strain‐rate–dependent stress–strain behavior of ethylene–propylene–diene monomer rubber in compression or tension , 2004 .

[41]  R. Howe,et al.  Dynamic contact of the human fingerpad against a flat surface. , 1999, Journal of biomechanical engineering.

[42]  Noorul Islam,et al.  Modeling and prediction of HAZ using finite element and neural network modeling , 2013 .

[43]  R Marks,et al.  Evaluation of biomechanical properties of human skin. , 1995, Clinics in dermatology.

[44]  Matthew B. Parkinson,et al.  Optimization of product dimensions for discrete sizing applied to a tool handle , 2012 .

[45]  Filipe Teixeira-Dias,et al.  New composite liners for energy absorption purposes , 2013 .

[46]  R Wells,et al.  Quantifying exposure in occupational manual tasks with cumulative trauma disorder potential. , 1991, Ergonomics.

[47]  Thomas J. Armstrong,et al.  Investigation of Grip Force, Normal Force, Contact Area, Hand Size, and Handle Size for Cylindrical Handles , 2008, Hum. Factors.