Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene

The instability of hybrid perovskite materials due to water and moisture arises as one major challenge to be addressed before any practical application of the demonstrated high efficiency perovskite solar cells. Here we report a facile strategy that can simultaneously enhance the stability and efficiency of p–i–n planar heterojunction-structure perovskite devices. Crosslinkable silane molecules with hydrophobic functional groups are bonded onto fullerene to make the fullerene layer highly water-resistant. Methylammonium iodide is introduced in the fullerene layer for n-doping via anion-induced electron transfer, resulting in dramatically increased conductivity over 100-fold. With crosslinkable silane-functionalized and doped fullerene electron transport layer, the perovskite devices deliver an efficiency of 19.5% with a high fill factor of 80.6%. A crosslinked silane-modified fullerene layer also enhances the water and moisture stability of the non-sealed perovskite devices by retaining nearly 90% of their original efficiencies after 30 days' exposure in an ambient environment.

[1]  A. Jen,et al.  Doping of Fullerenes via Anion‐Induced Electron Transfer and Its Implication for Surfactant Facilitated High Performance Polymer Solar Cells , 2013, Advanced materials.

[2]  Nripan Mathews,et al.  Low-temperature solution-processed wavelength-tunable perovskites for lasing. , 2014, Nature materials.

[3]  Chien-Hung Chiang,et al.  Bulk heterojunction perovskite–PCBM solar cells with high fill factor , 2016, Nature Photonics.

[4]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[5]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[6]  Huijun Zhao,et al.  Functionalization of perovskite thin films with moisture-tolerant molecules , 2016, Nature Energy.

[7]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[8]  F. Fabregat‐Santiago,et al.  Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy. , 2011, Physical chemistry chemical physics : PCCP.

[9]  C. Schroer,et al.  Determining the C60 molecular arrangement in thin films by means of X‐ray diffraction , 2011 .

[10]  Sudip Malik,et al.  Creation of 1D [60]fullerene superstructures and its polymerization by γ-ray irradiation , 2007 .

[11]  Saif A. Haque,et al.  Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells , 2016 .

[12]  Yaoguang Rong,et al.  Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells , 2015 .

[13]  C. Rao,et al.  Steric Effects on Hydrogen Bonding1 , 1966 .

[14]  Y. Inoue,et al.  Effect of steric hindrance on hydrogen‐bonding interaction between polyesters and natural polyphenol catechin , 2004 .

[15]  Meng-Che Tsai,et al.  Organometal halide perovskite solar cells: degradation and stability , 2016 .

[16]  Henry J. Snaith,et al.  Stability of Metal Halide Perovskite Solar Cells , 2015 .

[17]  A. Ubbelohde,et al.  Conductance mechanisms in crystals containing hydrogen bonds , 1956 .

[18]  Peng Gao,et al.  Impedance spectroscopic analysis of lead iodide perovskite-sensitized solid-state solar cells. , 2014, ACS nano.

[19]  Chin‐Ti Chen,et al.  A solution-processed n-doped fullerene cathode interfacial layer for efficient and stable large-area perovskite solar cells , 2016 .

[20]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[21]  Mohammad Khaja Nazeeruddin,et al.  Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides. , 2015, Nature chemistry.

[22]  Yongbo Yuan,et al.  Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells , 2016, Nature Energy.

[23]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[24]  R. Mcdonald.  Surface Functionality of Amorphous Silica by Infrared Spectroscopy , 1958 .

[25]  Jinsong Huang,et al.  Unraveling the hidden function of a stabilizer in a precursor in improving hybrid perovskite film morphology for high efficiency solar cells , 2016 .

[26]  M. Grätzel,et al.  Title: Long-Range Balanced Electron and Hole Transport Lengths in Organic-Inorganic CH3NH3PbI3 , 2017 .

[27]  Yongbo Yuan,et al.  Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells , 2014, Nature Communications.

[28]  Qi Chen,et al.  Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers. , 2016, Nature nanotechnology.

[29]  A. Jen,et al.  Solution‐Processible Highly Conducting Fullerenes , 2013, Advanced materials.

[30]  Laura M Herz,et al.  High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites , 2013, Advanced materials.

[31]  C. Tai,et al.  Chitosan/NiO nanocomposites: a potential new dielectric material , 2011 .

[32]  Qingfeng Dong,et al.  Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals , 2015, Science.

[33]  Jinsong Huang,et al.  Solvent Annealing of Perovskite‐Induced Crystal Growth for Photovoltaic‐Device Efficiency Enhancement , 2014, Advanced materials.

[34]  Yukihiro Takahashi,et al.  Hall Mobility in Tin Iodide Perovskite CH3NH3SnI3: Evidence for a Doped Semiconductor. , 2013 .

[35]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[36]  C. C. Gravatt,et al.  Effect of Hydrogen Bonding on the Electrical Conductivity of Organic Solids , 1967 .

[37]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[38]  A. Smith,et al.  Infrared spectra-structure correlations for organosilicon compounds , 1960 .

[39]  Qingfeng Dong,et al.  Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers , 2014 .

[40]  Heng Li,et al.  A polymer scaffold for self-healing perovskite solar cells , 2016, Nature Communications.

[41]  C. Dimitrakopoulos,et al.  Organic Thin Film Transistors for Large Area Electronics , 2002 .

[42]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[43]  Wai Kin Chan,et al.  Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance? , 2016 .

[44]  F. Fabregat‐Santiago,et al.  Electron Lifetime in Dye-Sensitized Solar Cells: Theory and Interpretation of Measurements , 2009 .

[45]  I. Ial,et al.  Nature Communications , 2010, Nature Cell Biology.

[46]  Juan Bisquert,et al.  Mechanism of carrier accumulation in perovskite thin-absorber solar cells , 2013, Nature Communications.

[47]  Wai Kin Chan,et al.  Perovskite Solar Cells: Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance? (Adv. Energy Mater. 7/2016) , 2016 .

[48]  Cheng Bi,et al.  Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells , 2015 .

[49]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[50]  Qing Wang,et al.  Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells. , 2005, The journal of physical chemistry. B.

[51]  H. Snaith.  Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells , 2013 .

[52]  Yanfa Yan,et al.  Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber , 2014 .

[53]  Linfeng Liu,et al.  Fully printable mesoscopic perovskite solar cells with organic silane self-assembled monolayer. , 2015, Journal of the American Chemical Society.

[54]  Yongbo Yuan,et al.  Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells , 2015, Nature Communications.

[55]  G. Zou,et al.  Synthesis of Thin, Rectangular C60 Nanorods Using m‐Xylene as a Shape Controller , 2006 .

[56]  Eric T. Hoke,et al.  A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. , 2014, Angewandte Chemie.

[57]  Wei Chen,et al.  Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers , 2015, Science.

[58]  Tae Kyu Ahn,et al.  Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency , 2015 .