Bouncing dynamics of resistive microswitches with an adhesive tip

This paper provides a detailed analysis of the dynamic response of a resistive microswitch. The analysis has been carried out by modeling the microswitch as a cantilever beam, according to the Euler-Bernoulli theory, and considering the damping interaction of the moving beam with the surrounding fluid. Attention has been given to the bouncing of the beam tip on the substrate upon actuation. A general adhesive-repulsive force has been applied at the tip of the beam to model its interaction with the substrate, where the attractive contribution is described by a van der Waals-like term and the repulsive contribution by a classical linear elastic springlike term. The resulting problem has been solved using a second-order-accurate finite difference scheme. It is shown that by tuning the adhesive interaction at the tip/substrate interface the number and amplitude of the bounces can be significantly reduced in favor of the system reliability and performance. Also design maps have been proposed to estimate the ac...

[1]  P. M. Zavracky,et al.  Electrostatically actuated micromechanical switches , 1997 .

[2]  S. Chowdhury,et al.  Normal impact of rough surfaces in presence of adhesion , 2004 .

[3]  Yves Dumont.  Vibrations of a beam between stops: numerical simulations and comparison of several numerical schemes , 2002, Math. Comput. Simul..

[4]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[5]  L. N. Rogers,et al.  The adhesion of particles undergoing an elastic-plastic impact with a surface , 1984 .

[6]  Singh,et al.  Adhesion between Nanoscale Rough Surfaces. , 2000, Journal of colloid and interface science.

[7]  K. Petersen.  Micromechanical membrane switches on silicon , 1979 .

[8]  K. Kendall,et al.  Surface energy and the contact of elastic solids , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[9]  George G. Adams,et al.  A dynamic model, including contact bounce, of an electrostatically actuated microswitch , 2002 .

[10]  Michael A. Bevan,et al.  DIRECT MEASUREMENT OF RETARDED VAN DER WAALS ATTRACTION , 1999 .

[11]  K. Leedy,et al.  Selecting metal alloy electric contact materials for MEMS switchesThe views expressed in this paper , 2004 .

[12]  T. Veijola,et al.  Equivalent-circuit model of the squeezed gas film in a silicon accelerometer , 1995 .

[13]  Steven T. Patton,et al.  Failure Mechanisms of Capacitive MEMS RF Switch Contacts , 2005 .

[14]  S. Majumder,et al.  Study of contacts in an electrostatically actuated microswitch , 1998, Electrical Contacts - 1998. Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts (Cat. No.98CB36238).

[15]  M. Dunn,et al.  The role of van der Waals forces in adhesion of micromachined surfaces , 2005, Nature materials.

[16]  B. Hamrock,et al.  Fundamentals of Fluid Film Lubrication , 1994 .

[17]  Brian D. Jensen,et al.  Adhesion effects on contact opening dynamics in micromachined switches , 2005 .

[18]  Ai Qun Liu,et al.  Mechanical design and optimization of capacitive micromachined switch , 2001 .

[19]  Gabriel M. Rebeiz,et al.  All-metal high-isolation series and series/shunt MEMS switches , 2001, IEEE Microwave and Wireless Components Letters.

[20]  Hertz.  On the Contact of Elastic Solids , 1882 .