Mechanical behavior improvement of open-pore copper foams synthesized through space holder technique

Abstract The use of modern porous materials in different engineering applications necessitates more concentration on open interconnected metallic foams with acceptable mechanical behavior. In this study, open-pore copper foams of different porosity percentages with various pore sizes were synthesized through lost carbonate sintering method and then characterized. The effect of copper mechanical pre-activation treatment on flexural strength of the foams was also investigated. The results showed that foams produced by mechanically activated copper powder (350 rpm, 5 h, BPP of 5) have a higher structural integrity, thus enjoying more enhanced mechanical strength relative to specimens without any pre-activation. This may be due to stronger struts mainly resulting from efficient filling of matrix powder between space holder particles. The response surface methodology was also used to examine the effects of carbonate volume percentage and its particle size on the flexural behavior of mechanically optimized foams. Based on the analysis of variances, it was found that the mechanical properties of the foams would improve as a consequence of porosity reduction, while similar relation also exists as average pore sizes decrease.

[1]  N. Michailidis,et al.  Compressive response of Al-foams produced via a powder sintering process based on a leachable space-holder material , 2011 .

[2]  A. Habibolahzadeh,et al.  Production of aluminum foam by spherical carbamide space holder technique-processing parameters , 2010 .

[3]  M. Alizadeh,et al.  Compressive properties and energy absorption behavior of Al–Al2O3 composite foam synthesized by space-holder technique , 2012 .

[4]  Akira Kitahara,et al.  ALPORAS Aluminum Foam: Production Process, Properties, and Applications , 2000 .

[5]  D. Brett,et al.  A new application for nickel foam in alkaline fuel cells , 2009 .

[6]  Rong Chen,et al.  Porous current collectors for passive direct methanol fuel cells , 2007 .

[7]  Effect of pore combination on the mechanical properties of an open cell aluminum foam , 2004 .

[8]  S. Das,et al.  Titanium-cenosphere syntactic foam made through powder metallurgy route , 2012 .

[9]  Gopal S. Upadhyaya,et al.  Powder Metallurgy Technology , 1997 .

[10]  M. Mabuchi,et al.  Compressibility of porous magnesium foam: dependency on porosity and pore size , 2004 .

[11]  Yuyuan Zhao,et al.  Lost carbonate sintering process for manufacturing metal foams , 2005 .

[12]  Luc Salvo,et al.  Spherical pore replicated microcellular aluminium: Processing and influence on properties , 2007 .

[13]  N. Zhao,et al.  Effect of pore size and relative density on the mechanical properties of open cell aluminum foams , 2007 .

[14]  M. El-Hadek,et al.  Mechanical and physical characterization of copper foam , 2008 .

[15]  Bin Jiang,et al.  A novel method for making open cell aluminum foams by powder sintering process , 2005 .

[16]  A. Rabiei,et al.  Composite metal foams processed through powder metallurgy , 2008 .

[17]  Y. Ahmed,et al.  Correlation between factors controlling preparation of porous copper via sintering technique using experimental design , 2007 .

[18]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[19]  A. Hassani,et al.  Production of graded aluminum foams via powder space holder technique , 2012 .

[20]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[21]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[22]  Yuyuan Zhao,et al.  Fabrication of high melting-point porous metals by lost carbonate sintering process via decomposition route , 2008 .

[23]  G. Boghetich,et al.  Influence of processing parameters on aluminium foam produced by space holder technique , 2009 .

[24]  Mechanical Response of Porous Copper Manufactured by Lost Carbonate Sintering Process , 2007 .