Detachable acoustic electric feedthrough

This paper outlines the development and characterisation of a detachable acoustic electric feedthrough (DAEF) to transfer power and data across a metal (or composite) plate. The DAEF approach is being explored as a potential means of wirelessly powering in-situ structural health monitoring systems embedded within aircraft and other high value engineering assets. The DAEF technique operates via two axially aligned piezoelectric-magnet structures mounted on opposite sides of a plate. Magnetic force is used to align the two piezoelectric-magnet structures, to create an acoustic path across a plate. The piezoelectric-magnet structures consisted of Pz26 piezoelectric disk elements bonded to NdFeB magnets, with a standard ultrasonic couplant (High-Z) used between the magnet and plate to facilitate the passage of ultrasound. Measured impedance curves are matched to modeled curves using the Comsol multi-physics software coupled with a particle-swarm approach, allowing optimised Pz26 material parameters to be found (i.e. stiffness, coupling and permittivity matrices). The optimised Pz26 parameters are then used in an axi-symmetric Comsol model to make predictions about the DAEF power transfer, which is then experimentally confirmed. With an apparent input power of 1 VA and 4.2 MHz drive frequency, the measured power transfer efficiency across a 1.6 mm Al plate is ~34%. The effect of various system parameters on power transfer is explored, including bondline thickness and plate thickness. DAEF data communication is modelled using LTspice with three-port one-dimensional piezoelectric models, indicating that data rates of 115 kBit/s are feasible.

[1]  James Kennedy,et al.  Particle swarm optimization , 2002, Proceedings of ICNN'95 - International Conference on Neural Networks.

[2]  Y. Hu,et al.  Transmitting electric energy through a metal wall by acoustic waves using piezoelectric transducers , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  Ian Powlesland,et al.  Modelling and Experimental Validation of the Acoustic Electric Feedthrough Technique , 2008 .

[4]  Ian Powlesland,et al.  In-situ health monitoring of a bonded composite patch using the strain ratio technique , 2001, SPIE Micro + Nano Materials, Devices, and Applications.

[5]  Scott D. Moss,et al.  In situ health monitoring of bonded composite repairs using a novel fiber Bragg grating sensing arrangement , 2002, SPIE Micro + Nano Materials, Devices, and Applications.

[6]  N. Rajic,et al.  In situ Monitoring of Crack Growth in Mild Steel under Closure Conditions Using a Piezotransducer Array , 2000 .

[7]  Stewart Sherrit,et al.  Efficient electromechanical network model for wireless acoustic-electric feed-throughs , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[8]  G.J. Saulnier,et al.  P3F-5 An Ultrasonic Through-Wall Communication System with Power Harvesting , 2007, 2007 IEEE Ultrasonics Symposium Proceedings.