Preparation and characterization of mono-valent ion selective polypyrrole composite ion-exchange membranes

Abstract Polypyrrole composite cation- and anion-exchange membranes (CEM and AEM), in which polypyrrole (PPY) coated on one surface of the membrane as a thin layer, were prepared by chemical polymerization of pyrrole in the presence of high oxidant concentration (Na 2 S 2 O 8 ). Existence of polypyrrole layer on the both types of ion-exchange membranes were confirmed by recording their coating density, SEM images and conductivity. These membranes were extensively characterized by recording their properties such as water uptake, ion-exchange capacity, contact angle, permselectivity and membrane conductivity as a function of polymerization time such as. It was observed that due to coating of PPY for 2 h, membrane permselectivity of CEM for NaCl (0.907) was reduced to 0.873, while it was increased from 0.747 to 0.889 in the case of AEM. Similar behaviors were also obtained for bi-valent electrolytes. Electrodialysis experiments were also conducted with polypyrrole composite ion-exchange membranes using mixed electrolytic systems. Relative dialytic rates for NaCl with respect to other bi-valent electrolyte were varied in between 5 and 8 (depending on bi-valent electrolyte), which suggested the feasible and efficient separation of mono-valent from bi-valent electrolyte. Slower electro-migration of bi-valent electrolyte (CaCl 2 , MgCl 2 and CuCl 2 ) in comparison to NaCl was explained on the basis of synergetic effect of sieving of bulkier bi-valent cations by tight and rigid polypyrrole layer and the difference in electrostatic and hydrophobic–hydrophilic repulsion force between bi-valent cations and mono-valent cation. It was concluded that these composite membranes are suitable for the efficient separation of same type of charged ions by electro-driven separation techniques.

[1]  H. Strathmann.  Electrodialysis and related processes , 1995 .

[2]  L. Bazinet,et al.  Identification of Skim Milk Electroacidification Fouling: A Microscopic Approach. , 2001, Journal of colloid and interface science.

[3]  V. Shahi,et al.  Studies on transport properties of surfactant immobilized anion-exchange membrane , 1999 .

[4]  A. Bernardes,et al.  Preparation and physical characterization of a sulfonated poly(styrene-co-divinylbenzene) and polypyrrole composite membrane , 2001 .

[5]  J. Balster,et al.  Preparation and characterisation of monovalent ion selective cation exchange membranes based on sulphonated poly(ether ether ketone) , 2005 .

[6]  R. K. Nagarale,et al.  Preparation and electrochemical characterizations of cation-exchange membranes with different functional groups , 2004 .

[7]  Mathias Ulbricht,et al.  Chemically and morphologically defined ultrafiltration membrane surfaces prepared by heterogeneous photo-initiated graft polymerization. , 1998 .

[8]  G. Wallace,et al.  Transport of copper(II) across stand-alone conducting polypyrrole membranes: the effect of applied potential waveforms , 1993 .

[9]  A. Partridge.  IOn transport membranes based on conducting polymers , 1995 .

[10]  M. Morita.  Effects of applied potentials on permselectivity of ions through polypyrrole/porous-polypropylene composite membrane , 1998 .

[11]  G. Gohil,et al.  Organic-Inorganic Hybrid Membrane: Thermally Stable Cation-Exchange Membrane Prepared by the Sol-Gel Method , 2004 .

[12]  G. Gohil,et al.  Comparative studies on electrochemical characterization of homogeneous and heterogeneous type of ion-exchange membranes , 2004 .

[13]  N. Lakshminarayanaiah,et al.  Transport phenomena in membranes , 1969 .

[14]  A. Yamauchi.  Membrane characteristics of composite collodion membrane: IV. Transport properties across blended collodion/Nafion membrane , 2000 .

[15]  Yuliang Yang,et al.  Preparation, properties and applications of polypyrroles , 2001 .

[16]  A. Dybko,et al.  Miniaturised all-solid-state potentiometric ion sensors based on PVC-membranes containing conducting polymers , 2004 .

[17]  T. Sata,et al.  Studies on cation-exchange membranes having permselectivity between cations in electrodialysis , 2002 .

[18]  S. K. Thampy,et al.  Comparative investigations on electrical conductance of ion-exchange membranes , 2000 .

[19]  Richard D. Noble,et al.  Membrane separations technology : principles and applications , 1995 .

[20]  T. Sata,et al.  Preparation and Transport Properties of Composite Membranes Composed of Cation Exchange Membranes and Polypyrrole , 1996 .

[21]  G. Wallace,et al.  Polypyrrole based cation transport membranes , 1999 .

[22]  S. K. Thampy,et al.  Preparation and electrochemical characterization of sulfonated interpolymer of polyethylene and styrene–divinylbenzene copolymer membranes , 2000 .

[23]  B. S. Makwana,et al.  A novel electrodialyzer for the production of demineralized water by electrodialysis , 2003 .

[24]  Seung-Hyeon Moon,et al.  Electrochemical characterization of sulfonated poly(arylene ether sulfone) (S-PES) cation-exchange membranes , 2003 .

[25]  T. Sata,et al.  Preparation and Properties of Composite Membranes Composed of Anion-Exchange Membranes and Polypyrrole , 1996 .

[26]  R. Murray,et al.  An Ion Gate Membrane: Electrochemical Control of Ion Permeability through a Membrane with an Embedded Electrode , 1982 .

[27]  Mitsuru Higa,et al.  Electrodialytic transport properties of cation exchange membranes in the presence of cyclodextrins , 2001 .

[28]  G. Pourcelly,et al.  Comparison of transport properties of monovalent anions through anion-exchange membranes , 1998 .

[29]  V. Shahi,et al.  Preparation of polyvinyl alcohol¿silica hybrid heterogeneous anion-exchange membranes by sol¿gel method and their characterization , 2005 .

[30]  G. S. Trivedi,et al.  Studies on the electrochemical and permeation characteristics of asymmetric charged porous membranes. , 2003, Journal of colloid and interface science.

[31]  Toribio F. Otero,et al.  Ionic diffusion across oxidized polypyrrole membranes and during oxidation of the free-standing film , 2005 .