Analytical model for predicting friction in line contacts

This paper presents the development of an analytical model for the prediction of the friction coefficient in line contacts under thermal elastohydrodynamic lubrication (TEHL). A new theoretical equation is deduced for determining the friction coefficient, taking into account the rheology of common lubricants under TEHL. This approach also considers the heat generated and its penetration into the bulk of the contacting solids. Therefore, the increase in temperature and ensuing variations in the operating conditions are determined. In order to illustrate the use of the new model and verify its accuracy, an experimental stage is performed in a tribological test rig. The predictions of the proposed model are compared with the results obtained in the test rig and other data reported in the literature for diverse lubricants, showing a good agreement in every case. © 2015 The Authors Lubrication Science published by John Wiley & Sons Ltd.

[1]  Carl Barus,et al.  Isothermals, isopiestics and isometrics relative to viscosity , 1893, American Journal of Science.

[2]  D. Dowson.  History of Tribology , 1979 .

[3]  P. Vergne.  Super Low Traction under EHD and Mixed Lubrication Regimes , 2007, 0704.1799.

[4]  Punit Kumar,et al.  Effect of lubricant selection on EHL performance of involute spur gears , 2012 .

[5]  H. P. Evans,et al.  Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes , 2009 .

[6]  J. Seabra,et al.  Surface initiated tooth flank damage: Part I: Numerical model , 2010 .

[7]  E. G. Trachman,et al.  Rheological effects on friction in elastohydrodynamic lubrication , 1973 .

[8]  Hertz.  On the Contact of Elastic Solids , 1882 .

[9]  J. C. Jaeger.  Moving sources of heat and the temperature at sliding contacts , 1943, Journal and proceedings of the Royal Society of New South Wales.

[10]  J. M. M. Guijosa,et al.  Models for predicting friction coefficient and parameters with influence in elastohydrodynamic lubrication , 2009 .

[11]  M. Khonsari,et al.  Theoretical and experimental investigation of traction coefficient in line-contact EHL of rough surfaces , 2014 .

[12]  J. L. Tevaarwerk,et al.  Shear behaviour of elastohydrodynamic oil films , 1977, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[13]  Ward O. Winer,et al.  Regimes of Traction in Concentrated Contact Lubrication , 1982 .

[14]  S. Bair,et al.  Influence of pressure and temperature dependence of thermal properties of a lubricant on the behaviour of circular TEHD contacts , 2010 .

[15]  A. H. Battez,et al.  Effect of Shear Rate, Temperature, and Particle Concentration on the Rheological Properties of ZnO and ZrO2 Nanofluids , 2014 .

[16]  P. K. Gupta,et al.  Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation , 1992 .

[17]  Jorge H.O. Seabra,et al.  Coefficient of friction in mixed film lubrication: Gears versus twin-discs , 2007 .

[18]  Dong Zhu,et al.  A Computer Program Package for the Prediction of EHL and Mixed Lubrication Characteristics, Friction, Subsurface Stresses and Flash Temperatures Based on Measured 3-D Surface Roughness , 2001 .

[19]  Hugh Spikes,et al.  Prediction of traction in elastohydrodynamic lubrication , 1998 .

[20]  A. Abdel-azim.  Fundamentals of Heat and Mass Transfer , 2011 .

[21]  Michael M. Khonsari,et al.  Traction in EHL Line Contacts Using Free-Volume Pressure-Viscosity Relationship With Thermal and Shear-Thinning Effects , 2009 .

[22]  D. Dowson,et al.  A Numerical Solution to the Elasto-Hydrodynamic Problem , 1959 .

[23]  Scott Bair,et al.  A Reynolds–Ellis equation for line contact with shear-thinning , 2006 .

[24]  Thorsten Gerber,et al.  Handbook Of Mathematical Functions , 2016 .

[25]  Javier Echávarri,et al.  Tribology: A Historical Overview of the Relation Between Theory and Application , 2015 .

[26]  J. M. Muñoz-Guijosa,et al.  Analytical model for predicting the friction coefficient in point contacts with thermal elastohydrodynamic lubrication , 2011 .

[27]  John Williams.  Engineering Tribology , 2022 .

[28]  Ward O. Winer,et al.  Some Observations in High Pressure Rheology of Lubricants , 1982 .

[29]  Bernard J. Hamrock,et al.  A Complete Solution for Thermal-Elastohydrodynamic Lubrication of Line Contacts Using Circular Non-Newtonian Fluid Model , 1992 .

[30]  P. Carreau.  Rheological Equations from Molecular Network Theories , 1972 .

[31]  Jérôme Molimard,et al.  In Situ Pressure and Film Thickness Measurements in Rolling/Sliding Lubricated Point Contacts , 2003 .

[33]  J. F. Archard,et al.  The temperature of rubbing surfaces , 1959 .

[34]  P. K. Gupta,et al.  Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part II: Experimental Data Correlations , 1992 .

[35]  J. W. Kannel,et al.  The Relation Between Pressure and Temperature in Rolling-Sliding EHD Contact , 1980 .

[36]  Michael M. Khonsari,et al.  On the elastohydrodynamic analysis of shear-thinning fluids , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[37]  Farshid Sadeghi,et al.  Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Contacts , 1990 .

[39]  A. Hase.  Fundamentals of Tribology , 2015 .

[40]  Michael M. Khonsari,et al.  Combined Effects of Shear Thinning and Viscous Heating on EHL Characteristics of Rolling/Sliding Line Contacts , 2008 .

[41]  Scott Bair.  Shear thinning correction for rolling/sliding elastohydrodynamic film thickness , 2005 .

[42]  Hisung Lee,et al.  A numerical solution to the elastohydrodynamic problem incorporating a non-newtonian rheological model , 1991 .

[43]  H. Cheng,et al.  Thermal elastohydrodynamic lubrication of spur gears , 1983 .

[44]  S. Bair,et al.  A Quantitative Solution for the Full Shear-Thinning EHL Point Contact Problem Including Traction , 2007 .

[45]  Erik Höglund,et al.  Influence of lubricant properties on elastohydrodynamic lubrication , 1999 .

[46]  Scott Bair,et al.  High Pressure Rheology for Quantitative Elastohydrodynamics , 2007 .

[47]  A. Lubrecht,et al.  Film thickness in point contacts under generalized Newtonian EHL conditions: Numerical and experimental analysis , 2007 .

[48]  Philippe Vergne,et al.  Classical EHL Versus Quantitative EHL: A Perspective Part I—Real Viscosity-Pressure Dependence and the Viscosity-Pressure Coefficient for Predicting Film Thickness , 2014, Tribology Letters.

[49]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results , 1976 .

[50]  Lee Rong-Tsong,et al.  A fast method for the analysis of thermal-elastohydrodynamic lubrication of rolling/sliding line contacts , 1993 .

[51]  B. C. Majumdar,et al.  Fundamentals of Fluid Film Lubrication , 2014 .