Single-step fabrication of ABPBI-based GDE and study of its MEA characteristics for high-temperature PEM fuel cells

[1]  K. Wippermann,et al.  Cell resistances of poly(2,5-benzimidazole)-based high temperature polymer membrane fuel cell membrane electrode assemblies: Time dependence and influence of operating parameters , 2010 .

[2]  L. Petrik,et al.  Preparation and characterisation of porous poly(2,5benzimidazole) (ABPBI) membranes using surfactants as templates for polymer electrolyte membrane fuel cells , 2010 .

[3]  K. Scott,et al.  The effect of electrode parameters on performance of a phosphoric acid-doped PBI membrane fuel cell , 2010 .

[4]  D. Stolten,et al.  Cell Resistances of ABPBI-Based HT-PEFC-MEAs: Time Dependence and Influence of Operating Parameters , 2010 .

[5]  Werner Lehnert,et al.  Redistribution of Phosphoric Acid in Membrane Electrode Assemblies for High Temperature Polymer Electrolyte Fuel Cells , 2009 .

[6]  Werner Lehnert,et al.  Membrane electrode assemblies for high-temperature polymer electrolyte fuel cells based on poly(2,5-benzimidazole) membranes with phosphoric acid impregnation via the catalyst layers , 2009 .

[7]  Unal Sen,et al.  Proton conducting membranes based on Poly(2,5-benzimidazole) (ABPBI)–Poly(vinylphosphonic acid) blends for fuel cells , 2009 .

[8]  Liliana A. Diaz,et al.  Water and phosphoric acid uptake of poly [2,5-benzimidazole] (ABPBI) membranes prepared by low and high temperature casting , 2009 .

[9]  Hsiu-Li Lin,et al.  Preparation of PBI/PTFE composite membranes from PBI in N,N′-dimethyl acetamide solutions with various concentrations of LiCl , 2008 .

[10]  Pablo Cañizares,et al.  Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC , 2007 .

[11]  Jian Colin Sun,et al.  AC impedance technique in PEM fuel cell diagnosis—A review , 2007 .

[12]  Chang-Soo Kim,et al.  Performance of a poly(2,5-benzimidazole) membrane based high temperature PEM fuel cell in the presence of carbon monoxide , 2006 .

[13]  Pedro Gómez-Romero,et al.  Recent Developments on Proton Conduc‐ting Poly(2,5‐benzimidazole) (ABPBI) Membranes for High Temperature Poly‐mer Electrolyte Membrane Fuel Cells , 2005 .

[14]  P. Gómez‐Romero,et al.  Proton-conducting membranes based on poly(2,5-benzimidazole) (ABPBI) and phosphoric acid prepared by direct acid casting , 2004 .

[15]  Yongzhu Fu,et al.  Development of novel self-humidifying composite membranes for fuel cells , 2003 .

[16]  S. Cha,et al.  Performance of Proton Exchange Membrane Fuel Cell Electrodes Prepared by Direct Deposition of Ultrathin Platinum on the Membrane Surface , 1999 .

[17]  Jesse S. Wainright,et al.  A H2O2 fuel cell using acid doped polybenzimidazole as polymer electrolyte , 1996 .