Computationally Efficient Reliability Analysis of Mechanisms Based on a Multiplicative Dimensional Reduction Method

The paper presents a computationally efficient method for system reliability analysis of mechanisms. The reliability is defined as the probability that the output error remains within a specified limit in the entire target trajectory of the mechanism. This mechanism reliability problem is formulated as a series system reliability analysis that can be solved using the distribution of maximum output error. The extreme event distribution is derived using the principle maximum entropy (MaxEnt) along with the constraints specified in terms of fractional moments. To optimize the computation of fractional moments of a multivariate response function, a multiplicative form of dimensional reduction method (M-DRM) is developed. The main benefit of the proposed approach is that it provides full probability distribution of the maximal output error from a very few evaluations of the trajectory of mechanism. The proposed method is illustrated by analyzing the system reliability analysis of two planar mechanisms. Examples presented in the paper show that the results of the proposed method are fairly accurate as compared with the benchmark results obtained from the Monte Carlo simulations.

[1]  R. Rackwitz,et al.  Structural reliability under combined random load sequences , 1978 .

[2]  E. Jaynes.  Information Theory and Statistical Mechanics , 1957 .

[3]  Bruno Sudret,et al.  The PHI2 method: a way to compute time-variant reliability , 2004, Reliab. Eng. Syst. Saf..

[4]  Steven Dubowsky,et al.  Geometric and elastic error calibration of a high accuracy patient positioning system , 2005 .

[5]  H. Rabitz,et al.  High Dimensional Model Representations , 2001 .

[6]  J. Vrijling,et al.  Assessment of an L-Kurtosis-Based Criterionfor Quantile Estimation , 2001 .

[7]  Jaehoon Choi,et al.  Stochastic Linkage Modeling for Mechanical Error Analysis of Planar Mechanisms , 1998 .

[8]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[9]  Yimin Zhang,et al.  Robust tolerance design for function generation mechanisms with joint clearances , 2010 .

[10]  Gordon R. Pennock,et al.  Theory of Machines and Mechanisms , 1965 .

[11]  Z. Huang.  Error analysis of position and orientation in robot manipulators , 1987 .

[12]  Sankaran Mahadevan,et al.  Efficient surrogate models for reliability analysis of systems with multiple failure modes , 2011, Reliab. Eng. Syst. Saf..

[13]  Gordon J. Savage,et al.  The set-theory method for systems reliability of structures with degrading components , 2011, Reliab. Eng. Syst. Saf..

[14]  Kenneth W. Chase,et al.  Design Issues in Mechanical Tolerance Analysis , 1998 .

[15]  Bruno Sudret,et al.  Analytical derivation of the outcrossing rate in time-variant reliability problems , 2008 .

[16]  Xiaoping Du,et al.  Time-Dependent Reliability Analysis for Function Generator Mechanisms , 2011 .

[17]  Steven Dubowsky,et al.  A Parameter Identification Study of Kinematic Errors in Planar Mechanisms , 1975 .

[18]  M. Pandey,et al.  Structural reliability analysis based on the concepts of entropy, fractional moment and dimensional reduction method , 2013 .

[19]  Aldo Tagliani,et al.  Stieltjes moment problem via fractional moments , 2005, Appl. Math. Comput..

[20]  Xianzhen Huang,et al.  Reliability Sensitivity Analysis for Rack-and-Pinion Steering Linkages , 2010 .

[21]  Mahesh D. Pandey,et al.  An effective approximation for variance-based global sensitivity analysis , 2014, Reliab. Eng. Syst. Saf..

[22]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[23]  Xiaoping Du,et al.  Time-dependent probabilistic synthesis for function generator mechanisms , 2011 .

[24]  Gordon J. Savage,et al.  Dependability-Based Design Optimization of Degrading Engineering Systems , 2009 .

[25]  Mahesh D. Pandey,et al.  An efficient method for system reliability analysis of planar mechanisms , 2013 .

[26]  S. S. Rao,et al.  Probabilistic approach to manipulator kinematics and dynamics , 2001, Reliab. Eng. Syst. Saf..

[27]  J. Beck,et al.  A new adaptive importance sampling scheme for reliability calculations , 1999 .

[28]  Ronald L. Graham,et al.  Concrete mathematics - a foundation for computer science , 1991 .

[29]  S. Rahman,et al.  A univariate dimension-reduction method for multi-dimensional integration in stochastic mechanics , 2004 .

[30]  B. Kang,et al.  Stochastic approach to kinematic reliability of open-loop mechanism with dimensional tolerance , 2010 .

[31]  H. Rabitz,et al.  General foundations of high‐dimensional model representations , 1999 .

[32]  Aldo Tagliani,et al.  Hausdorff moment problem via fractional moments , 2002, Appl. Math. Comput..

[33]  Henri P. Gavin,et al.  High-order limit state functions in the response surface method for structural reliability analysis , 2008 .

[34]  J. W. Wittwer,et al.  The direct linearization method applied to position error in kinematic linkages , 2004 .

[35]  Aldo Tagliani,et al.  Moment information and entropy evaluation for probability densities , 2012, Appl. Math. Comput..

[36]  M. Pandey,et al.  System reliability analysis of the robotic manipulator with random joint clearances , 2012 .

[37]  Sébastien Briot,et al.  Accuracy analysis of 3-DOF planar parallel robots , 2008 .

[38]  Weidong Wu,et al.  Uncertainty analysis and allocation of joint tolerances in robot manipulators based on interval analysis , 2007, Reliab. Eng. Syst. Saf..

[39]  Jeffrey C. Lagarias,et al.  Convergence Properties of the Nelder-Mead Simplex Method in Low Dimensions , 1998, SIAM J. Optim..

[40]  Aldo Tagliani,et al.  Hausdorff moment problem and maximum entropy: A unified approach , 1999, Appl. Math. Comput..

[41]  Mahesh D. Pandey,et al.  An adaptive exponential model for extreme wind speed estimation , 2002 .

[42]  A. Tagliani,et al.  Optimal predictive densities and fractional moments , 2009 .

[43]  S. Rahman,et al.  A generalized dimension‐reduction method for multidimensional integration in stochastic mechanics , 2004 .

[44]  Steven Dubowsky,et al.  A systematic error analysis of robotic manipulators: application to a high performance medical robot , 1997, Proceedings of International Conference on Robotics and Automation.

[45]  Jianbing Chen,et al.  The equivalent extreme-value event and evaluation of the structural system reliability , 2007 .

[46]  P. L. Novi Inverardi,et al.  Maximum Entropy Density Estimation from Fractional Moments , 2003 .

[47]  J. N. Kapur,et al.  Entropy optimization principles with applications , 1992 .